My presario cq5300f there 2x1GB memory or 1x2GB memory?

Similar Questions

• Compaq Presario CQ5300Y desktop PC - memory upgrade

  Hello, everyone! I hope you are all well.
  
  I have a desktop PC Compaq Presario CQ5300Y, to which I would like to upgrade the memory.
  
  The product specifications indicate clearly that the motherboard, a M2N68-(Narra5), 2 x DDR2 memory media. (In addition, the amount of installed memory is 2 GB.)
  
  The product specifications, in the information section of upgrade memory also mention the following:

  -----------------------------------------------------------------------------

  Dual channel memory architecture
  Supports two DDR2 DIMM (240-pin)

  Supported DIMM types:

  PC2-5300 (667 MHz)
  PC2-6400 (800 MHz)

  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports up to 4 GB * on 32-bit PCs
  * 32 - bit operating systems cannot resolve a full 4.0 GB memory.

  -----------------------------------------------------------------------------

  I'm clear (with what the article said) I have only available two DIMM DDR2 2 brackets.

  "What confuses me is the statement" ""supports 2 GB DDR2 DIMM '. This is the reason for my question.

  "Supports 2 GB DDR2 DIMM" means that I have to use 2 GB DDR DIMM only, which means I can only go to 4 GB? Or could I use 4GB DDR2 DIMM, which breaks the barrier of 4 GB?

  In a few words, I would like to - at least - 8GB (assuming that I find two modules DIMM DDR2 4 GB). Would it be possible to have the above configuration?
  
  It is important to mention that the PC is running a 64-bit operating system.

  I would appreciate the attention he can draw on this issue.

  Best regards.

  Hello:

  Each slot of memory on the motherboard of your PC cannot accept that a maximum of one module of memory of 2 GB.

  1 x 2 GB will work.

  2 x 2 GB will work.

  1 x 4 GB will not work.

  2 x 4 GB will not work.

• Compaq presario 1800us (470013-558) memory upgrade

  It is an old laptop that I am trying to get a little more life on as a replacement/backup machine.  At currently stock 192 MB of RAM (64 MB on MB, 128MB on SODimm).  Performance is naturally miserable because of the many to get excited when the virtual memory should be used.

  Specs say it can take up to a total of 320 MB and the HP parts store indicates that a 256 MB module was formerly available.  The part number of this 256 MB module is 175325-001, but it is essentially impossible to get now.

  Online sellers seem to indicate that the equivalent part 256 MB is 161554-B21, which is available.  I ordered and received this part from a local seller online.  However, when I installed it, the laptop still shows that a total of 192 MB of RAM.  Software memtest.exe see the module 256MB 128 MB.

  Either:

  (A) the 256 MB module, I received is defective

  (B) the 161554-B21 part belongs the wrong for this machine

  (C) the BIOS is not configured to see the full 256 MB (BIOS shows any useful info and there is almost nothing to twist here - is - it possible to see more info?)

  Any help would be appreciated.

  Jerry

  At this point, there are only a few explanations that can explain it.

  1. the motherboard is limited. This probably isn't the case since it supports up to 320 MB of RAM.

  2. the RAM is classified. A possibility, but the RAM chips appear to be intended for a stick of 256 MB of RAM.

  3. some of the RAM chips are failed, but not be detected by a tester memory. It's the most likely scenario.

  I would contact the supply store that they have been purchased from replacement or the manufacturer of the RAM for troubleshooting.

  I would also recommend, get the HP RAM if possible. If you are interested in the HP RAM, then you can try this RAM. If it does not load, just search the 167136-001 part number. It is listed as available here, but I would be surprised if they still had the PC100 memory.

• Are there limits (memory?) in the sql server trial 2012?

  Hello!

  I have a database that was running on sql 2008 r2 express, I had a lot of problems and thought it was the memory limit in express, I upgraded to 2012 the trial to check if that was the problem, but the same error occurs again, is the memorylimit (1 GB) active in 2012 the trial, they said wich sql trial version is actually... someone who knows?

  Joakim

  If anyone knows it would be the guys who are Pro and server support in the TechNet forums:

  http://social.technet.Microsoft.com/forums/en-us/categories

  http://social.technet.Microsoft.com/forums/en-us/sqldensetup/threads

• I have added a second hard drive for my Compaq Presario CQ5300F.

  After installation, I formatted because it came from another HP I had before. What I have to do something to add programming to make it work or it be automatically detected and used by my PC?

  Hello

  The hard drive should be detected automatically.  What is the make, model and size of the hard drive?

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Problem upgrade memory on Satellite M40-142

  Hi all

  I am trying to upgrade my M40 - 142 (win XP) with 2x1GB memory modules. the initial memory is a single unit of 512 MB. When I remove and replace with 2 new modules of the system starts.
  If I leave the original memory in the slot and add only a single module 1 GB system startup and total ram 1.5 GB.
  If I use a single module of the new memories, the system is not to start again.

  I tried to update the bios to the latest version but when I run the .exe is an error and I am not able to run it.

  looking at the specifications of the motherboard should support the upgrade of memory 2x1GB.

  Thanks for your help

  Marco

  I guess you used the memory modules live all simply not compatible.

  The laptop s RAM can be certainly upgraded up to 2 GB of RAM (2 x 1 GB), but you must use simply compatible and God quality modules.

  Cheap may be not compatible or defective.

• Update memory

  Hello

  I have a HP Pavilion g6 Notebook PC 2221 EV X64bit, Intel (r) Core i3 - 3110 M CPU @ 2.40 GHz, with an A-DATA 4 GB DDR3 1600 Mhz, module in the connector 1. I want to move from a factory setting of 4 GB RAM to 8 GB RAM memory.

  I did some research on the web for example (analysis tool essential) but I'am still uncertain on which module of memory should I buy like noone Specifies whether it is a

  DIMM or SODIMM?

  Voltage?

  Double or Single Channel module?

  I would also like to know what replacement memory (brand names that are compatible HP) choice I have? Can anyone help?

  Hi Fotzou,
  
  
  
  I don't have a lot of the information you are looking for, what I found in the Maintenance and Service Guide is a reference to the reference numbers that is known to work in your notebook memory HP. You can find this information on page 47. I have also included the document 'upgrade memory (RAM)'. This will guide you through the steps of verification of the amount of memory can be installed, the maximum memory supported and how to install it.
  
  
  
  An option that you always check the HP Shopping web page, to see if there is memory available for your laptop modules there.
  
  
  
  Thank you.

• Satellite M40X-230 memory upgrade

  Upgrade memory

  I have a satellite M40X-230, most of the documents indicate that it is expandable up to 2 GB of RAM.
  On the underside there a memory expansion slot which will have a 1 GB SODIMM, giving me a total of 1.5 G bytes of RAM.

  Is it possible to add the other 500 MB. (I'm experimenting with Virtual Machines and data bases)

  In case anyone is interested!

  There is a module in memory of 500MByte located on top of the motherboard. Unfortunately this is mounted internally in the case.
  It is located below and slightly to the right of the center of the keyboard.
  However, the casting of the cover of the laptop cover electronics and so it is not accessible by simply removing the keyboard. the top cover should be thrown which also consists of removing the screen.

  Otherwise, the module is mounted in exactly the same type of socket than under the machine.

• Mid-2014 specifications memory MacBook Pro

  I have a MacBook Pro (15-inch, mid-2014, retina), 2.5 GHz Intel Core i7, A1398 model number.

  There 2x8GB memory DDR3, 1600 MHz, ECC disabled.

  I want to update to 2x16GB, but it's very confusing what memory to buy.

  DIMM or SODIMM

  1600 MHz and 1866 MHz

  240 pins or 204 pins

  Registered or not

  Setting buffered or unbuffered

  1.3V or 1.5V

  Can someone please clarify? I am surprised that there are no clear guidelines on the Apple support site.

  I found these for example:

  (1) http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=868120 9 & CatId = 11482

  (2) http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=973399 3 & CatId = 11482

  (3) http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=980150 1 & CatId = 11484

  Help, please! Thank you.

  Retina models do not allow upgrading RAM.  Only non-retine models have available slots by the user on the logic board.  In fact Mbps retina models have a very low rating not repairable (ifixit.com gives a 1 out of 10 for * user *-fixable).

  The thin design of systems of retina require RAM soldered on the Board and different format of version 2.5 SSD in readers.

  In addition... to open the case on a non-retine model is an option authorized user without voiding the warranty.  Open the case of a model of retina gives Apple the opportunity to decline any warranty service if something breaks (map logic, display, fans,...).

• ThinkPad Edge E540: Compatible memory

  Hey,.

  Is there a memory compatible with Thinkpad Edge E540 list?

  I want to get either Crucial or Gskill, but don't know what games of these manufacturers module is compatible with the E540.

  In looking at DDR3 1.35 and 1.5V memory sets with 2 x 4 GB sticks

  Just a reminder that you must use 1.35v memory with CPU Haswell (ix-4xxx). HASWELL will not take 16 GB sticks.

  Other than that, anything DDR3-1333 and above should work.

• Compaq Presario CQ60-420US: CD/DVD drive does not

  Hello

  CD/DVD drive on laptop does not.

  Brand: HP-Compaq Presario CQ60-420US

  Memory type: DDR2 SDRAM
  Type of socket: Socket 478

  Number of memory slots: 2
  MPN: Ports output 579000-001: Ethernet (RJ-45), SATA II
  Embedded Audio, integrated video chipset

  Device Manager: CD-ROM/DVD-ROM readers:

  (1) yellow triangle on HL-DT-ST DVDRAM GT20L ATA Device

  Status: Windows cannot start this hardware device because its

  information of configuration (in the registry) is incomplete or damaged

  (code19)

  Details: Hardware ID: first string readings.
  IDE\CdRomHL-DT-ST_DVDRAM___DCO3__

  Any help would be greatly appreciated

  @doublesix66

  Try to follow the procedure under the resolution of the subtopic-method 3: difficulty manually the registry entries corrupted on the link below to remove upper and lower filters and see if that helps the issue.

  https://support.Microsoft.com/en-us/KB/314060/en-us

  Kind regards

  DP - K

• VMware Fusion 7 and VMware Tools - leak memory in Debian comments

  At some point during my updates from Mac OS X to Yosemite, VMware Fusion to 7.x and my Debian a guest to 8.0 "Jessie" on my 2012 Mackbook Pro, leaking memory of the Linux kernel is developed.  If I follow these steps, then I'd lose soon about 3 GB memory of the core area.

  1. Install Debian Jessie in a new machine virtual de VMware Fusion
  2. Install open-vm-tools or VMware Tools bundled.
  3. Perform an intensive IO as operation simply cat/dev/zero |-c 1000000000 head >/tmp/test.txt.
  4. Smem - wtk and see ~ 3 GB memory under the dynamics of the kernel memory, benefit.

  I opened the 15709682007 assistance request and the representative said that they will fix the problem in a future release. In the meantime, I have what seems to be a workaround for someone else that is affected.  Basically, pulling packages from backports jessie seems to have solved the problem.  This is based on the comments added to open-vm-tools.

  1. Add the Debian repository -backports jessie in /etc/apt/sources.list
  2. sudo apt - get update; sudo apt - get install t Jessie-backports open-vm-tools-dkms open-vm-Tools-Office
  3. sudo apt - get - t jessie-backports dist-upgrade (install kernel 4.1)
  4. Restart comments

  A few quick thoughts:

  1. If you have several virtual machines (or other programs) running on your computer host and VMware Fusion detects that there is memory pressure on your host computer, it uses the "balloon" (vmw_balloon for the latest distributions of Linux) Guest pilot to fly some memory of the guest OS.  This memory "stolen" would appear as memory Dynamics non-cache kernel inside the guest.  Running "sudo rmmod vmw_balloon" should release all memory climbed to the guest OS.  Note that using the balloon driver generally improves the performance of the guest and host, despite the appearance of fear "used memory" inside the guest-"used memory" is just a thing of accounting that we had to use in order to change the priority of the memory between the host and the guest.  It is not "used" in the conventional sense of the term.

  2. I believe that recent versions of virtual hardware non-cache dynamic kernel allocate the necessary memory for SVGA and 3D features (display RAM, texture RAM, etc.).  Disable graphic 3D acceleration or by reducing the amount of graphics shared memory if you are using a new version of virtual hardware (both in the VM > settings... > display) might help.  Decommissioning of a virtual equipment as early (in the VM > settings... > compatibility) can also help.

  See you soon,.

  --

  Darius

• Upgrade memory on V3839TU

  Compaq Presario V3839TU a 2slots memory, so I want to upgrade... After I checked, my memory is "DDR2 1 GB Ramaxel 1RX8 PC2-5300 s-555" and I can't found anywhere the same memory like that... Can I replaced it with other brands? If it can be replaced by other brands, what should I check between the memory. ? I designate as DDR2 1 GB 1RX8 PC2-5300 s-555 Ramaxel, then another one that I use DDR2 1 GB Samsung 2Rx8 PC2 - 5300 s - 555... Is this possible? The different is Ramaxel 1RX8 and Samsung 2RX8... Please help again... THX...

  You don't have to use the Ramaxel, if that's your question. Go to Crucial and use their system scan to see what is recommended:

  http://www.crucial.com/store/drammemory.aspx?cat=RAM

• Update information for Mini CQ10-525DX memory

  Machine has installed 1 GB Win 7 Starter running.   I would like to add another GB to improve performance.  Can not find the final information about the number of memory locations.  Considering the upgrade to Win 7 Home Premium.

  Several questions

  1. are there 2 memory slots on this box

  2. in the case, could I replace the card of 1 GB with a 2 GB card and make it work - that is, have the BIOS recognize and use?

  3. that extra GB provide a significant improvement in Win 7 Starter performance machine?

  4. Win 7 Home Premium would go with 1 GB

  This widget could not be displayed.