my printer is a note

Similar Questions

• JJUJ of printing works is not for Iphone 5 s

  I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.

  Hello

  Go to settings touch id remove fingerprint and then add impressions back again.

  See you soon

  Brian

• After printing a page, when I try to print again it says print function is not available

  I have a Canon MG6250 connected via USB. I run Windows 7 with all latest updates and the version of Firefox is currently 38.0.5. Since some time, probably about a year, starting after a new version of Firefox, I think, I have problems printing. (Sorry I don't remember which version it started happening.) Unless I'm waiting for the printer to prepare completely, although the print dialogue box appears and I click on print, often (not always) nothing happens. If I try to print again I get a pop-up window indicating that the print function is not available. If I then close Firefox and try to restart it, it tells me Firefox is already running. I have to put an end to its process through the Task Manager. Often, I want to print from several tabs already charges with the pages to print. Even if I managed to get the first tab print, somewhere along the line the same thing often happens: before I printed the tab page from the last I get the box pop up again and I have to end the process of Firefox to make it work again. I can generally prevent his happening if I monitor the activity of the CPU of my computer (via System Mechanic) and make sure that all activity ceased after printing a tab until I try to print on the other. This makes printing of desperately slow Firefox!

  I don't have any problems printing of any other application.

  Note that relatively recently, due to a failure of the system disk, I reinstalled Windows and all my software. I was hoping that a by-product of doing this can solve the problem with printing from Firefox, but it didn't.

  I would be very grateful for a solution to this problem.

  I continued to use IE with no problems printing. But then after Firefox 3.0 came out I gave it another go - and the problem seems to have been resolved. No matter how much time I spend in another tab and select print, it behaves as it should. Thank God - Firefox is so much better than IE.

• Print Help does not help me open downloads on my android

  Cannot retrieve or open downloads. Printed text does not help because I can't find the button

  You are able to use the menu in Firefox for Android? On some devices, a stack of 3 points appears at the right end of the address bar to display the menu, while on other devices, there is a button to (touch capacitive) of 'material' to the camera button at the home to show the menus.

  In the menu, you should find under Tools downloads.

  In addition, by default, Firefox uses the download system folder, so if you open the download application that comes with your device you should find them there (in general).

  A little luck?

• Epson printer driver does not appear in the printer & Scanner window

  I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?

  Mark Romine wrote:

  How ca I add the driver to my preferences printers and Scanners?

  You do not add a printer driver for printers and Scanners.  You add the printer itself.

  The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:

  On AirPrint - Apple Support

  (I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)

  The Artisan 50 printer seems (but not scanner) software in the Apple driver:

  Printer and scanner software available for download for your Mac - Apple Support

  Therefore, follow the instructions here:

  OS X El Capitan: Add or remove a printer

• Add-on for Print Edit does not work

  I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

  Hello

  Did you mean this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

  The contact details are on the right side of the page, next to the section 'on this add-on.

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• 29,0 Firefox, print 'selection' does not work.

  When I select a section of a page, then use the "print" button, the 'selection' print option does not work. It is not highlighted in the print menu.

  The button "print" 'action' in Firefox 29 differs from earlier versions. Now, he opens preview print rather than going directly to the box of "native print dialog. That breaks the ability to print a 'selection '.

  My advice is to highlight the selection , then use {Ctrl + P} to start printing until Mozilla fixes the action of the "print" button in a newer version of Firefox.

• DeskJet d2680: printer itself settles not on computer

  I installed everything correctly the first time and seemed to have a test normal printing.

  However, when I tried to print a text document there skip lines. Help suggested I remove the driver and reinstall. I uninstalled all the software and uninstalled the printer from the Device Manager.  When the installation came to the part where it installs the printer, the computer has detected the printer, it will not install on the computer.  Any suggestions? It's a HP Deskjet D2680, running windows XP.

  What error message did you get during the troubleshooting steps?

• Satellite P100: BI - mail/net/print Touchpad do not work

  Hello

  I was not able to get my mouse pad to load the features for a while now, and I thought finally try and find help on this forum.

  Basically, the mouse pad and keys still works without problem, but the 3 icons in Quick Launch bar volume and messaging/net/print icons do not work...

  I can't get the blue light to show on the mousepad either so I think that some kind of pilot is missing?

  I don't know if it was very clear, but if someone knows how to get the special features of touchpad to light again made me know!

  Thank you

  FC

  Hmmm... missing?
  You got your laptop with pre-installed software and I can't believe that something is missing.
  The question is what you did to make it work.

  Have you perhaps installed updates from Microsoft for touchpad?
  What P100-xxx you have exactly?

• The printer door does not shut down after printing

  HP Envy110 model D411c.    I printed out a page, the door opened, the extension arm is released, but was partially blocked. The printed page in the status bar and was recovered, the extension arm retracted, but the printer door has not closed completely.  I printed the pages since then, everything works well except for the door.  It closed partially and stops.  No warning appears on the screen.  I have to close to allow the doors close. Help!

  OK, I have a solution thanks to the autonomy and the helpline UK. At least, it works for my desire 120th All In One.

  The door / cover will always return to the position where the task was started. I don't remember to start work with the Panel in the raised position, but apparently I did.

  Solution: With the printer, gently push the door closed. Now print or copy. As the work that started with the door closed, he will return to this position even when the work is completed.

  Why oh why is anybody's guess. Good luck!

• prints print sensor does not

  Hello

  IM creates hp pavilion dm4 1265dx. running in os win 8. my finger print sensor does not not pls help me.

  Try to watch this video on setting up the fingerprint reader, let me know if you get any errors:

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/1253402949001/set-up-a-fingerprint-reader/video/

• I tried to buy my book - DEFAULT TEXT - your book seems to have default text that has not been modified. Printed books will not include this text. This means all my text will not print?

  Using OSX El captain on a desktop iMac. iPhoto 9.6.1

  I tried to buy my book - this box appears - TEXT by DEFAULT - your book seems to have default text that has not been modified. Printed books will not include this text. Does this mean that all my text will not print?

  I've been twice now and change the text of Bradley Hand to the Blackboard to Helvetica Neue - which seemed to be the default. Message remains displayed. I don't know what else to do. This is my third book over the years, but the first with this problem. Can someone advise please?

  Thank you Davina

  It is not a problem of fonts. It is the problem of the sample text entered by the models.

  The error message means that there is a text field in your book which is still on show at the text included by the model, and you will need to replace this text with your text. This textfield might be hidden behind a picture.

  If you create a preview of the book, such default text is omitted. Have you compared the preview of what you see in iPhoto? Text that shows in iPhoto, but not in the preview will be such default text.

  For example, the section 'Topic of this book' on the flap back in some themes is a default text that should be replaced by your own legend:

  

• Printer Deskjet F2410 not: deskjet F2410 not unable to detect paper

  I have a printer deskjet F2410 not that I haven't used a long time to print. I use for scanning. I recently change the cartridge I need to print documents. However, the printer ask me to load paper when I loaded already the stack of paper in the input tray. Can someone help me?

  Thanks in advance...

  Hi @LuthorLex,

  Thank you for taking part in the community of HP, I would be happy to help you! I see that your Deskjet of HP F2410 is asking you to "load paper" even if there is already a paper inside the printer.

  I would like to firstly you remove the paper and do a hard reset:

  1. disconnect all cables and cards of memory in the printer.  Unplug the power cord, directly from the back of the printer when the printer is still on.

• HP Smart print icon does not appear

  After installing HP Smart print, icon does not appear in the command bar in the Internet Explorer browser. It appears only when I transfer a message outlook for the Internet Explorer browser. Plese help.

  Operating system Windows 7-64

  THAT IS TO SAY 9

  I found out that HP Smart printing is not compatible with IE (64 bit) so my problem was solved by using IE (256).

  Thank you very much.

• printed page is not high on paper squared

  printed page is not high on paper squared

  Tigerlilly wrote: printed page is not high on paper squared

  Hello Tigerlilly, here is the link on your HP printer that contains information about the cleaning of the rollers in your printer.

  Generally, when the printer displays the pages that are not as you expect, or the rollers that pull the paper in the printer are dirty, or the paper is not properly installed in the printer, causing the rollers to pull the paper into the printer at an angle

  Just a few things to check.