I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

Advertisement

As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

You should probably use a video capture card that can capture from HDMI source,

Tags: Windows

Similar Questions

  • Hi I hope someone can help. I find that when I increase the clarity on an image, it becomes very noisy/grainy. I told myself there is a tool to Denoise, but I can't seem to find it on lr5. I watched the tutorials, but they seem to be for lr4

    Hi I hope someone can help. I find that when I increase the clarity on an image, the image becomes very noisy and grainy. I told myself there is a tool to Denoise images but I can't seem to find it on lr5. I saw a couple of tutorials but called lr4 lr5 not. Help!

    Judging by the before and after shots, the original was very underexposed and you he cleared up in LR. Where only a small amount of light enters the camera, these pixels have a weak signal (image) / noise. Subsequent clarification editing software will make the sound a lot more visible, much larger than a dose of clarity. Conversely, lower the tone of an overexposed image will produce an image with less noise because S/N, in camera was higher. For this reason, it is advised to give, if possible, the exposure as much as possible without exceeding the point of clipping to the brightest highlights. In this case, with the sky in the background, you probably might not have increased the exposure of many, but you could bring the sky just before clipping, relying on the capabilities of Lightroom's sophisticated recovery allow to darken the sky during editing, which would have reduced the amount of required clarification for the pilot and the trees.

  • I want to install "Wizard task", but I can't seem to find anywhere to download it.

    Task Wizard

    I want to install "Wizard task", but I can't seem to find anywhere to download it.  There, can someone help me?  I'm a total dummy when it comes to computers.

    Hi Donna,
     
    -Are you looking for program Assistant tasks planning tasks of your computer?
     
    If Yes, you can use the Scheduler tasks program to do the same.
    For more information, see:
     
    If this isn't the case, include more details pertaining to the matter to help us you help.
  • Hello, I had a sharing adobe account but I can't seem to find him. I had posted a series of record. How and or connect?

    Hello, I had a sharing adobe account but I can't seem to find him. I had posted a series of record. How and or connect?

    Hi momo,.

    Are you referring to the workspaces? This service was withdrawn on January 7, 2015. There is no way of recovering files that were not uploaded before the service pensions.

    If you are referring to a more recent Acrobat.com account, try to connect to https://cloud.acrobat.com/files.

    Best,

    Sara

  • How to fix plug-in on yahoo messenger it always says error and I try setting but I can't seem to fix the plug-in at all.

    How to fix the plug-in on yahoo messenger if i can hear music on it someone can please help me all I get is error and I try to fix it, but I can't seem to solve this

    Hello

    1. when the question is is produced?
    2. don't you make changes to your machine before the problem?

    I suggest that you contact the support of Yahoo messenger for better help.

  • Illustrator, says 'Missing Police' while InDesign detects and uses the same fonts OK

    Looks like I'm having some problems with fonts for CC Illustrator on Mac OSX (Mavericks), both new installs.  Specifically, I'm trying to open a .ai file that uses the font "Coolvetica.  Then, I get the error "Missing Fonts" here:

    PastedGraphic-4.png

    I installed the police and restarted Illustrator:

    PastedGraphic-6.png

    Screen Shot 2014-06-20 at 4.52.08 PM.png

    I opened the dialog box "Find fonts" to see that is still missing:

    PastedGraphic-5.png

    I wanted to check that it was, in fact, installed, then I open OpenOffice and tried it with success.  Also, I opened InDesign and tried it with success.

    I searched the forums for clues.  I found there a CC cleaning tool, if I followed the instructions, making sure to restart my computer and reinstall Illustrator.  Unfortunately, I was met the same problem after reinstalling.

    Any help would be greatly appreciated.

    To recap:

    Steps to reproduce:

    1.) to open a .ai file that already contains fonts "coolvetica.  In my case, it's a file that has been generated on another Windows computer running an earlier version of Adobe CS.

    2.) get the error message about missing fonts

    3.) install the fonts using the font book

    4.) restart Illustrator and re - open the file

    Expected results:

    Police is correctly

    Actual results:

    Still missing a font

    Thanks for the persistence, Jacob.

    I tried to clear the cache of fonts using 'sudo atsutil databases - remove' and restart immediately with no will.  I also gave the thing 'Place' a trial with no will.  However, I did find a resolution!

    In this case, for some reason, I have two different .ttf files "Coolvetica" I installed, both are the value of type 'Ordinary' (see screenshot in my first post).  Even if they are all two "regular", they have a different appearance for them (once again see screenshot above).  I was beginning to think that this double name is confusing Illustrator, so I dug deep enough into it and found that I could change 'Ordinary' to something else so that the name is not in conflict.  "This necessary by using the guide here: FontGeek" TTX helps to rename fonts.  After you run the police through program "ttx", I replace all occurrences of 'Ordinary' with the 'descent' (in reference to the stung 'G') within the generated file .ttx.  I then re - crossing "ttx" program and installed the newly created fonts.  I opened Illustrator and tada!  It worked.

    Ultimately, it seems that the name of type of duplicate fonts was which was missing his shot upward.   I was able to replace the fonts correctly after that.  This could cause headaches for other members in my group because they their policies will have a different name than mine and now they're going will be requested to "Seek a police", but I think that it is a step in the right direction and I can figure the rest out later.

    Thank you!

  • I need to combine several PDF files into a single attachment on my iPhone. I subscribe to the $ 9 per month package, but I can't seem to find an option to combine the files of one attachment. Can you please help?

    I need to combine PDF files in a magnetic. I subscribe to the $ 9 per month package. Is this possible?

    Hello

    With Adobe Acrobat iOS app, we can only create PDF of it. To combine the documents, go to https://cloud.acrobat.com/combinepdf on your device browser.

    Thank you

    Abhishek

  • Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

    Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

    Thank you

    Peter

    You're welcome, Peter.

  • I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. I don't want t

    I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. For my personal use, I don't have a need to reach creative Cloud. You have any suggestions for a workaround?

    Try installing Adobe application Manager down the link and check

    Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you

  • Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

    I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

    I have the SSD and the caddy

    I need to:

    delete the original OEM HD

    Install the SSD

    install OEM HARD drive in secondary Bay

    Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

    or I have to

    delete this HD

    Install the SSD

    go into the BIOS, and then assign him drive in AHCI (etc.)

    Install Win 7

    install OEM HARD drive in secondary Bay

    etc.

    I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

    is this true?

    Pavilion dv7 - 6143cl

    I7

    8Gb

    Win7 (64)

    Thank you very much

    Hello:

    Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

    If so, you have an AHCI BIOS default.

    If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

    I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

    So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

    To install W7 on your SSD, check your own install of W7 disc.  Here's how:

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    Can't answer your question on the dual boot as I never did before.

    Paul

  • where to find and use the (HCL) hardware compatibility list for Windows xp3

    Original title: where to find and use the Windows (HCL) hardware compatibility list

    HCL for Windows xp3

    That does not "response" from MS Support Engineer Umesh was particularly useless.

    Unfortunately for you, the HCL XP (or Windows Catalog or Windows Marketplace or whatever it is renamed) no longer exists.  I guess Microsoft is not particularly interested in letting you know what the material is compatible with an operating system that is no longer, it sells and supports only.

    The trail begins here: "the latest Windows XP Hardware Compatibility List" (314062 KB) that leads to theWindows 7 Compatibility Center.  KB 314062 is also linked to the http://www.windowsmarketplace.com/ which used to have a list of compatible with XP hardware and software, but now redirects to the Microsoft store, another dead end that XP is concerned.

    If you really want to dig, your best bet is probably used the Wayback Machine (archive.org) looking for old copies of

    http://www.microsoft.com/whdc/hcl/default.mspx - but a lot of links are broken or "not supported" unless you use Internet Explorer 6 (the message claims 6 'or more' but 8 does not work).
  • I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

    I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

    It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

  • I want to open and read the tax document encrypted from my class last year, how can I do?

    I want to open and read the tax document encrypted from my class last year, how can I do?

    Do you remember the password?

    Did you change your computer, or reinstall Windows after you saved the file?

    What version of Windows you have now?  And what version you have when you saved the file?  Specify the service pack level.

    How do you encrypt and save last year?

    What tax preparation software you use?

  • Can I do a fresh install of Windows 7 Home and use the old product key?

    Hello

    I got a laptop from a former employer who removed the hard drive before give me the computer.

    I installed a new hard drive and you want to do a fresh install.

    The previous operating system was Windows 7 Pro OA Enterprise Edition and I have the product key for it.

    Can I do a fresh install of Windows 7 Home and use the old product key?

    and after that I still increases to 10 Windows using the same product key?

    Concerning

    Regrow72

    If you have plans to upgrade to Windows 10 Home, I would skip trying to reinstall Windows 7 and go directly to Windows 10.

    You can use your family Windows 7 product key to install Windows 10, learn how:

    How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

    Step 1: How to download official Windows 10 ISO files

    Step 2: how: perform a clean installation of Windows 10

    If you are experiencing problems activating Windows 10, see:

    Activate your Windows 10 license with Microsoft Chat support

    I recommend to go to Windows 10 now while you can, because Microsoft will stop the free upgrade offer at the end of July:

    Windows 10 free upgrade offer ends July 29 as planned

    Microsoft to remove Windows Notification Nag upgrade 10

    Resources:

    Windows Free Upgrade on schedule 10 to end July 29, 2016 - what are your options?

    If you still want to reinstall Windows 7 Home Premium, please see:

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  • BlackBerry BB Curve 8330 Smartphones and Palm Tungsten E2 - sync and use the Office to

    I have a new BB Curve 8330.

    Before I used a cell and a Palm Tungsten E2.

    I managed to export/import data from Palm to BB (via Microsoft Outlook).

    I thought that the Blackberry will be delivered with its software for calendar/contacts/tasks - but I see only synchronize with Outlook.

    I want to continue to use the Palm Desktop software and sync it on Blackberry.

    It seems that it's not possible.

    Is it?

    I have the habit of the Palm E2 and never used Outlook before. I like the features of Palm but BB does not work with it. Why does this work?

    Any advice would be much appreciated!

    Thank you!

    Taylor

    Hello

    You will not be able to use the Palm and Blackberry at the same time. BB does the synchronization only with Outlook. But the good news is that Palm will also sync with Outlook. If nothing is lost.

    Sync the Palm to Outlook, and then synchronize the Blackberry to Outlook. Continue to use Outlook. You will have no need of the Palm is useless since once you have all the info in your Blackberry.

    The functionality that a single out of the BB, it's that you don't have a portable documents, as it is in the Palm. I hope that manufacturers will think about fixing that in a couple of new editions to come.

    I love my Blackberry and it is easy to forget that it is so different from the Palm.

    If you like your Palm and can not get used to the BB then I suggest you get a Palm of Cingular ATT phone.

    is much larger that the Curve 8330 I have.

    I love my BB Curve 8330.

    I've learned it's pretty fast and I gave my cousin my Palm E2.

    Now, everything depends on how fast learner you are and how open you are to new.

    Good luck!

Maybe you are looking for

  • External monitor connected to the Dynadock does not work

    I just bought a docking station universal toshiba dynadock via amazon.com (latest version). I plugged on an Acer Aspire 5738zg computer laptop, Windows 7, 64 bit.Everything works great - except for my external monitor (6 months old packard bell viseo

  • (Not mine) music plays from the start up. How can I get rid of him?

    Some plays of music (sounds like a machine slot) each time I start Firefox. I reinstalled the application and replaced both the Firefox file folder Application Support of the user library and the org.mozilla.firefox.plist folder of user preferences l

  • Cisco UCS 5108 add NIC to ESXi host

    Hello I'm quite new in the world of the UCS, so I slowly read up on it. We currently have a laboratory with a 5108 that host two of our esxi5 servers. When I say lab, I mean a configuration that is not in production yet, and if I can use it to learn

  • Can I switch from Vista Home Premium 32 bit to Windows 7 Professional 64-bit?

    I wanted to basically triple - check the compatibility of my laptop current in what concerns the upgrade from Vista to Windows 7. As a student, I can get windows 7 professional 64 bit for £30. Their moment I'm running a 32-bit version of vista Home p

  • Disk layout strategy

    I have some HP DL380 with 8 internal bays. I need to make the most of storage and external storage is unfortunately not an option. Historically, I had good success with 4-Bay disk R10 and I keep a spare drive so these servers all 5 bays in use. They