my printer runs a test each time until it prints what I plan

Similar Questions

• When I opened my first items 9, I do not see the workspace, I have to restart the program several times until it works, what's happening?

  Can someone help me, the program was fantastic, but a few months ago when I opened my first I can't see the workspace, the program does not show me an error message, but I have to restart Windows several times until I can work normally, what happens, first adobe have some problems with other programs installed? I don't understand, I have a serial number, I buy a dell with the program installed, with Windows 7.

  Can someone help me, it is very important for me this program and I use it a lot

  

  Hi all

  I solved my problem by reading the article that wrote JsV in 29 of August, I have delete the Adobe Premiere elements Prefs, thanks Abdel Romano, who responded to the JsV and solved the same problem I had, thank you very much.

• Photosmart 3180 prints the worksheet to test each time it is turned on

  Once a black ink cartridge failed, I tried both black cartridges HP no and neither worked and now put in a HP92.  This works.  Since the first wrong cartridge has been the printer prints the complete test page whenever it is turned on.  Is there a way to prevent it from doing this?

  Hi Len77,

  Welcome to the HP Forums!

  I understand that your HP Photosmart c3180 prints a test sheet whenever it is turned on.

  Please take a look at this guide. An alignment Page prints whenever the all-in-one is turned on or off, or a print job is started.

  Hope to hear back, and have a great day!

• Why are you up-to-date Firefox so fast? I have problems with my Internet Bank each time until they have updated their software. And at this point, you already have a new version.

  I have a popup that says there is a new version and I don't know how to get rid of it.
  As I said in the question I encounter problems when you update too many times in one year.
  I didn't know where to ask this question. There may be a better place, but I could not find.

  @uinsin42, there is no Firefox 8.0. 2 and 3.6.28 versions of Mozilla as the most recent for each is 8.0. 1 and 3.6.24

• HP Deskjet 2132: Deskjet 2132 guard print page to test every time I want to print

  I just got this printer

  Whenever I go to print something on my printer, its tour and I don't know why, so when I have activate it and go to print an article, it shall decide on its own to print a Test Page first, all under its weight is to lose paper, it says its by aligning the heads, it should not have to align heads whenever I want to use

  How he stop doing that every time? , its boring and I cannot find any way to stop it in the settings menu

  Any help would be appreciated... Thank you... Jim

  Hi @JimDirt,

  Welcome to the Forums of HP Support!

  I see that your new printer HP DeskJet 2130 guard print a "test page" each time you print.  I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating, it would be for you. It seems that alignment has not completed when you installed the printer at the start. The alignment sheet must be scanned or the process repeats. This is normal and it will continue to realign itself ended successfully.

  This guide illustrates the alignment process:

  • HP DeskJet printers 2130 - setting up printers
  Load paper into the paper feeder (make sure that you load into the fresh, unused paper tray).

  Load plain, US letter or A4 paper in tray after installing ink cartridges.

• iMac spinning Rainbow wheel appears each time I click on something and running extremely slow

  My iMac (27 inch, mid 2011) is gel/loading every time I click on something. This occurs on the simplest tasks such as the opening of the finder window, open system preferences, right-click on desktop etc.

  It happened all of a sudden a few days ago and I have not updated recently... I noticed this occurring has started after I opened the Photos Agent app for the first time and imported more than 1000 images/videos of my iPhone6. Could this be the cause of the problem?

  Memory is 4 GB and it has worked very well so far. I checked disk utility and you have no error. Activity monitor looks great too.

  Most important - looking the best way to backup or clone the HDD that I have a very important job out there. What is the best way to do it? I have a Macbook Pro, as well as with 100 GB free on it. Can I use it to help somehow?

  If someone could help me out that would be great!

  Mac form:

  OS X Yosemite 10.10.3

  Processor: 3.1 GHz Intel Core i5

  4 GB OF RAM

  More than 500 GB free 1 t

  iMac, OS X Yosemite (10.10.3)

  Here are my results of EtreCheck (sorry for the bad pictures but I was unable to open the browser to copy paste)

  

  

  

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

  [Process started]

          Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec

          The test results are on the Clipboard.

          Please close this window.

  [Process completed]

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Measure the time in seconds each time run you a VI

  Dear people,

  I'm trying to measure the speed of a wheel using a magnetic sensor and other settings in the vehicle. What I also need to document in my project is the time elapsed (in seconds) each time that you run the program. Is there a way where you can measure the elapsed time in seconds in labview?

  Any sort of suggestions or examples would be useful.

  Below is an example of how I wanted my final to watch output file.

  Time (sec) | Speed (mph). Acceleration |

  0                    23                 5

  1                    24                 6

  2                    25                 7

  Thank you in advance!

  Rahul-

  Hi iZACHdx,

  That's what I was looking for exactly! Thanks for the simple example.

  Thank you

  Piraux

• Explorer 8 wants to udate 2530548 KB; It runs pretending to install each time restarting the computer so far appears once again completed the looks at all that I can find on the web no cure to settle

  It runs pretending to install: each time restarting the computer up to date appears again; I look at all, I can find no cure for installation is complete on the web.

  all others so far seem to fill. KB 2530548 tried to install several times. shows that I need to be updated after every stop.

  Hello

  In addition, check to see if this article helps you.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time. I use a new Windows 7

  My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time.  I use a new Windows 7.  Any ideas?

  Thank you, schasof

  Hello

  Maybe you can use "System Restore":

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  and the date when to use your printer worked OK.

  LC

• You will need to run Adobe Customization Wizard each time for each new update of the player?

  Hello

  This should be a simple question...

  I run Adobe Customization Wizard each time on each new incremental update of player, or just once a major revision (Reader 9, Reader X)?

  Not answered this question because it would be better asked in the forum for enterprise deployment. The Wiz is a tool of deployment of the NTS and is used only for initial deployments in most cases. It allows to customize the installer and the product when it is first installed. You can use it for all installations, but it is a less common scenario.

  Usually, you customize the first version you install and then just apply updates as they become available.

  HTH.

  Ben

• Vista Restart take very long after SP1, looks like it's re - install a lot of packages each time. Is there a solution?

  I got Vista SP1 applied for almost a year.  Since this has been done, I have an extremely long time for a restart ends and the consumption of CPU resources fall of 99%, used on a system dual core.  I speak 5 more minutes.

  With a detailed process monitor to run at startup, see the DCOM Process Launcher and the Windows Module Installer work for a long time, and empty a large number of entries in the CBS.

  Why am I 'reinstall' packages each time that I reboot my system >

  Is normal?  Someone else already seen this?  Is there any solution for this?

  Looking for advice.  He doesn't have to take 5 minutes to restart a system that is as fast as mine is.

  Hi JSchindler192,

  There could be several reasons why you experience the performance issue on the computer.

  To refine the question, I suggest you try the following steps:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and restart the computer.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Step 2: Put the computer to clean and test start.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 3: You can follow the steps mentioned in the link below to optimize windows vista for better performance.

  Optimize the performance of Microsoft Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I think that my safari is infected with the virus, he on redirect keeps me from another Web site each time that I click my mouse or press a key on my keyboard... Help!

  I think that my safari (Yosemite) is infected by the virus, he on redirect keeps me from another Web site each time that I click of my mouse or press a key on my keyboard... Help!

  I can't seem to download the print screen, here, anyway, it starts the LINK share appears every time it redirect:

  -"ps4ux.com/click? h = Ax722bagzrmWM3RP_5wPSvP63fG7dqaJCNo55LiVexxUaivPBxSeS7A3C2V4-bO...» »-

  middle part is hidden by «...» »

  the last part is:

  -"ttp: 3% a % 2F % www.apple.com%2F 2F & rt = 46 & date_sid = 50fc88582b4e8512b3e35e56351a22a3" in a new tab.

  Run etrecheck to go to etrecheck.com and see what is running under the hood.

• New local folder created each time starts at Thunderbird

  Whenever I run Thunderbird, a new folder is created in each time (always the same name) in my area the local folders and I can't find how to remove it. The cold is named:

  1376842793.33723.YahooMailNeo%40web171205.mail.IR2.Yahoo.com.wdseml

  I deleted my account Yahoo completely and I disabled all add on partners with Yahoo. I tried to boot in safe mode and began to disable all add ons and the thing still creates.

  Any ideas? It's driving me crazy.

  Kirk

  Menu {ALT + H} help > troubleshooting information
  Select display folder

  Warning: Close Thunderbird

  In the Explorer window
  Open the Mail folder
  Open the 'Local Folders' folder
  Delete the file
  1376842793.33723.YahooMailNeo%40web171205.mail.IR2.Yahoo.com.wdseml

  Restart Thunderbird.

  You will need to drill down into local folders until you in the subfolder right. I guess your question is in the list of root folders local folders.

• How can I disable camera shutter sound each time something supported?

  I get a type of sound camera shutter when pages like Google or hotmail, or any page 'active', upload pictures on Web sites for example. Sometimes when things are moving quickly, it becomes a cascade of distortion of the sound, like a loud sizzle or worse. You can turn down the sound with the help of his usual device, but then of course you can not listen to any music or something else besides. It is extremely annoying, and now that I have synced my phone with my office they both the same problem. I checked all the settings and can't find a way to disable. I don't know exactly what is triggering, but it seems that when something is in charge.
  I use firefox 18.0.2 on a Mac running Snow Leopard 10.6.8. Is there anything else I can tell you?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Each time you start firefox asked me if want to allow the program to make changes to the computer

  Whenever I start firefox, I wonder if I want to allow the program to make changes to my computer. Do not have this problem until I updated to the new version.

  This has happened

  Each time Firefox opened

  == I've updated to the new version

  Check that you are not Firefox running as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  In the Compatibility tab, make sure that this level of privilege: "Run this program as an administrator" is not selected.

  You should also check the firefox.exe program properties in the Firefox program directory.