My printer will not Auto Print

Similar Questions

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• Clock of the Internet will not auto sync on my windows Tablet 7, operation of the manual synchronization. What causes this?

  My windows clock will not auto sync and I have to manually synchronize the clock. Tablets clock falls almost immediately after be synchronized and it does not automatically sync with time windows but a manual synchronization works very well.

  I even made a full recovery, thinking it was corrupt software or associated possible viruses, but the problem persists.

  Any ideas would be greatly appreciated.

  Hello

  Thank you for visiting Microsoft Community.

  That by description, you experience the problem with the internet clock won't auto sync but it will manually sync on Windows 7 tablet.

  I certainly understand your concern and appreciate very much all your efforts to try to solve this problem.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. You did any specific changes before this problem?

  2. Do you receive an error message? If Yes, what is the exact error message and the error code?

  3. What is the make and model of the Windows 7 Tablet?

  4. Since how long you are having this problem?

  I suggest you to refer to the steps below and check if that helps.

  1. Right click on the clock in the taskbar and choose adjust date/time.
  2. The time tab-click Internet, and then press change settings.
  3. Delete what is in the server field and replace it with pool.ntp.org.
  4. Click Update now. In a few seconds, Windows clock must get synchronized.
  5. Click on OK and then OK again and you're done.

  For reference:

  You can also see the following article in Microsoft Help below and check if that helps.

  Set the clock

  http://Windows.Microsoft.com/en-us/Windows/set-clock#1TC=Windows-7

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• iOS 10, screen will not auto dim.

  Hello

  Since I updated to 10, my lock screen and home on my iPhone TO will not be automatically dim or turn off.

  I've updated my lock screen auto to a 30 second time out, but if I press the home button or receive a notification; the screen stays on indefinitely.

  Hi there, CyrenaH!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with the iPhone not dimming properly. I know how it is important to be sure that the iPhone does not stay on at all times! The good news is that there are a few steps, you can try to get this support! First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Google game will not auto Update apps

  Hey any1

  Google on my Z3 play no auto Update apps. It will not warn even me if there's any updates at all.

  Settings is on 'update still', or something like that. I did a little factory reset, but to no avail.

  Any1 els feel the same?

  Best regards

  Edit: I almost forgot. I'm on the latest version of Marshmallow.

  If you white list of multiple applications that are going to be scanning the playstore for update or the applications/services that require data, it will be the device of the Stamina mode.

• Will not auto update time

  My phone does not automatically update the time. There's n New York time zone. When I manually enter the hour it will not award send me an iMessage. Does anyone know how to fix this?

  Greetings, Dombeezy.

  Be able to rely on the time that your iPhone provides is certainly important. I'll be happy to help you with this.

  Get help with the date and time on your iPhone, iPad and iPod touch - follow them steps described in this article to get the time to update automatically.

  Thank you for using communities of support from Apple!

• PDFmaker addin will not auto-charge for Word

  Using Office 2013 and Acrobat Pro 11.0.08. Until this week, the PDFmaker add-in is always enabled in Word. Then it was a mistake to make a merger in PDF format.

  Now, every time I start up Word, PDFmaker shows as inactive ("' load behavior: unloaded" ") until I go to file | Options | Add-ins and tick the box to load. Then, it works fine until I'm close Microsoft Word and have to do it again.

  How to auto-charge? I can't find a place to set it.

  You can solve this problem by changing the registry entry "LoadBehavior".  The value must be 3 (loading at startup).

  With office of 2013, the registry key is to

  HKEY_CURRENT_USER\Software\Microsoft\Office\Word\Addins\PDFMaker.officeaddin

  A note: the Add-In was loading when I ran as administrator, but not when I opened just a Word doc.  I checked this same registry under HKEY_LOCAL_MACHINE key and it has been fixed at 3.  I guess that's the reason why it worked when run as administrator.  For some reason any the LoadBehavior key had been reduced to 0 on my HKEY_CURRENT_USER registry key.

  However, the fix above will work because I just tried it on my machine and another one here in the office that had the same problem.

• DV6Z will not Auto-Connect to the Wi - Fi connection

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  GP_01 wrote:

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  You don't need any software HP Connection Manager or Assistant wireless HP as for automatic wireless connection. Uninstall it reboot and you connect to the network using Windows network and sharing Center...

• Windows 8 disc locked; It does not start at the home screen, will not auto repair and doesn't give me access to safe mode

  Nightmare; perfectly working windows 7 64-bit configuration I upgraded (stupidly) to Windows 8 (it seems installing a 32-bit version for my troubles). I installed a driver for a having previously worked USB WiFi adapter (that is, it was working fine before the upgrade) and now it does not start. It says "irql less than equal", says his collection of information and restarts to a kind of repair mode, none of the options which work because he complains that the hard drive is locked. Any attempt to start in SafeMode (SHIFT + F8) fails, with mnode security options panel shows ever in service options. Really, a very incomplete piece of software - I should know better than to install version #1 what whatsoever.

  Suggestions for moving forward? No, I don't have a record of victory 8 because I updated my installation of windows 7 perfectly work in updating online.

  Simple repair that has worked for me.

  If you have a windows install disc (if you borrow 1 from a friend)

  run the disk at startup, press on f9 to choose cd rom as boot, press a key when it asks you,

  Let the disc to the refreshment of startup repair section, choose Advanced & go to the command prompt and type.

  Bootrec.exe

  Bootrec/fixmbr

  Bootrec.exe/fixboot

  Bootrec.exe/RebuildBcd

  When all this is over, it will show that your o/s and the reader don't worry if it shows as D instead of C, it is because the system resource use C at this point, it will ask you if you want to add this player to your startup type Y and your good to go, your old win 8 will draw upward as it did before spread the word.

• Intel PROSet will not Auto Connect

  M6300 XP64, Intel PROSet Wireless 11.1.1.3 software version

  "Once you connect to the network, it is saved as a profile. When you're not connected, Intel PROSet/Wireless attempts to connect automatically in the order specified in this list. »

  NO - IT IS NOT

  I checked that it is set to Auto Connect.

  Properties > advanced > Auto Connect > Auto (default)

  The only way I can connect is starting the PROSet software, then select an available network connection listed, then click on connect.  Here are the networks shown in my profile.  Everything looks like it should work, it's not fair.

  What's wrong???  TIA

  
  

• CP8 sensitive project will not auto run in the browser from the desktop

  I did a sensitive project that works very well on digital devices. However, when it is using a desktop (Windows 7 & Chrome 37) browser it does not autoplay after loading. I prefer to run the project with skin all disabled and having the user click play at the bottom button to advance the project is distracting for my learners.

  The desktop version is also ignoring the actions of the buttons.

  Located solution:

  http://blogs.Adobe.com/Captivate/2014/07/update-on-Captivate-HTML-5-content-playback-issue - google-chrome - browser.html

• My site will not auto resize it as it allows?

  I was wondering what I was doing wrong. My site uses automatically resize to smaller screen resolutions, and now it won't, so it's cut half of navigation on a creen smalls.

  It seems that your navigation menu is outside the body of your page, that's why he disappears in a smaller window.

  

  Julia

• Always on display in the research of deleted messages (years ago and even), blank incoming emails and filters not auto running. * sigh *.

  Two problems here, maybe they are related. I went through and deleted to rebuild the database as other say to do and much more for a while. I'm puzzled.

  Now, I do receive a ton of emails and are struggling to go through all the and need to save a large group of them for my blog of the journal. However I also created subfolders (which btw filters I've implemented will not auto or filter)

  I made a blunder in terribly I suppose that set up e-mails or something, this is what I have going.

  First my biggest problem, emails see the list when they arrive (and it can be a whole bunch with the same date and time) which show the sender and date. When I go to open these emails, they are empty. I don't think that this shows the object, that I did not what happens today... If I log in e-mail that these emails have not the sender, subject, but all seem to have the same date and time and of course emails are empty.

  Annoying problem: my research through my emails will show old messages deleted and shippers with dates and summer topic. But of course, they are removed if no content. I would rather all of these old emails go goodbye altogether.

  3rd, my filters do not auto filter, I have to put this (new to me) option up badly. I'm not going in and manually filter.

  I'm sorry, I waited so long to write, and the problems have accumulated. I'm a newbie with all this, so please be gentle and detailed with me. I think generally these things read me solutions, but all the solutions I found were only for the first problem (above) and seems to help for a little while, then boom she is still with blank emails, which appear to be completely lost.

  Maybe you can guide me to maintain my emails (Imap) online on the server and only read, write, and delete Thunderbird? I am so lost and frustrated. Thank you.

  I'm sorry I let this get so out of hand here,
  Mariah

  That your description sounds a lot to Norton anti virus, but others do.

  Multiple copies of the same message are repeated almost always anti virus analyzes incoming messages. Disable analysis and the problem goes away then turn it on and it resumes.

  My guess is that your filter problems and research problems are also associated with this uniquitous and most ignored security tool that mess so far more than it should...

  Removal of the index
  I assume you mean the global-messages - db.sqlite. If you close Thunderbird and now delete. Research will be incomplete until it rebuilt and the time to do this will have a lot to do with how much mail is and how busy the computer is.

  Now, create an exclusion in your anti virus program for Thunderbird profile folders. My guess is it is scanning the files in your profile, every time that Thunderbird tries to open and turning usually things in a fierce struggle, including Thunderbird loses that he just does not wait if files are locked. He expects exclusive access to her files immediately, not in 10 minutes when anti virus did it's thing. So things are added to the index but not deleted. Mails do not move as the destination or source file is 'in service', etc..

• Re: Satellite Pro L450 - 13P - CD / DVD does not auto play

  Hello

  Recently, I've provided a customer with a new Satellite Pro L450 - 13P (Windows 7 Professional). He came back to me the a few days saying it was a great laptop but CD / DVD will not auto play. I googled this problem and I tried all kinds of solutions suggested, including the various changes of registry, uninstall and reinstall the device DVD driver, unchecking and rechecking always use AutoPlay box everything has failed.

  I have a Toshiba Satellite A200 (Vista) and thought I would try to insert an automatic game disc in my drive. To my astonishment, my laptop had developed the same problem, it used to auto play, but now it doesn't.

  Any assistance people can give me in this matter is accepted with gratitude.

  Thank you very much
  Mark

  Hi Mark

  As far as I know autoplay can be set to Autoplay settings (Control Panel).
  There you can define what should happen when you insert each type of media or device.
  For example, I have all the options set to ask me every time.
  Have you tried to change these settings?

  Have you tested with different media?

  If you have noticed that mean the same thing on your laptop computer you have tested with the same support as your client?

• Folder will not refresh

  I have a specific file that will not auto refresh when adding, deleting, moving, etc. from this location.  What can I do to fix this?  He really interupts my workflow because I have to click on the button refresh about 200 times a day.

  You help will be very appreciated.

  I discovered that it was due to access the folder found through libraries instead of directly.

  Thank you