My query on VS2010 designer change request

Similar Questions

• I'm working on PC. Using Adobe Muse how do I make design changes to a Web Site previously designed and published

  I'm working on PC. Using Adobe Muse how do I make design changes to a Web Site previously designed and published

  You cannot edit HTML with Muse. You are looking in the wrong place. You must re-create using the tools of Muse or change elsewhere.

  Mylenium

• OIM Design Console - password change request

  Hey all,.

  Does anyone know how to solve a situation when as soon as you connect with Design Console it displays a dialog asking to change password? When I enter new password, it reports:

  The transaction did not. The changes have not been saved in the database.

  Thank you

  Philipp

  I found a problem. VM has an incorrect date. As soon as I have synced the time on it with ntpdate, it started working as expected.

  Sorry for my stupidity

• the drive designation, change to G: Won't hold

  I have 4 new backup drives. Seagates.  Two were G and two player F.   I changed the drive F and G for a car, but it won't last.  I have to change every time I use two backup discs F.

  How can I change the drive designation and do stay changed for life.   The backup disk is connected to our Windows Server.
  Thank you
  Chris

  Hi Chris,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• synchronization of the Tablet design changes

  I made substantial changes to the Web site design at the request of the customer, but these changes synchronize on the Tablet and phone versions of the site. Do I have to manually update each of these sites?

  Hello

  As Muse to create separate and record pages for the phone and table layouts they are not interconnected with desk combination.

  You must go to each page, then make the desired changes. To go to each page layout you must go to the plan view and at the top, you will be able to select them.

  

  Concerning

  Vivek

• Implications of InDesign to Design change to the file server

  Hello world

  I'm not new to Indesign, but I'm not a designer - I am computer scientist - so I wanted to just post this request here to see if anyone had any suggestions.

  Currently, we have several file servers across the country (all very independent of each other). We intend to put in place Microsoft DFS in our environment so data cen be purchased at our data center for situations of DR.

  I understand that Indesign uses UNC paths to find his images / links. I know also that you should keep the old name of the server is going down a path of death so Indesign doesn't take ages trying to find servers before you open the documents.

  I guess what I need to know is, frustrating how's this for developers to have to update all Indesign files with new links, it's something you can do in a batch? Or is it a frame-by-frame process. Y at - it suggestions that anyone can do to minimize the impact? Unfortunately, we must go to this new structure (at the top level in all cases - at lower levels remains the same), but I don't want to cripple our production line having to open hundreds of files and restoring links to images of 1000.

  We run CS6 on Mac and PC.

  See you soon

  Garry

  I links google name change script indesign server and the first hit looks promising:

  http://forums.Adobe.com/message/2997354

• JDBC Oracle driver change requests for users with "rowid"?

  Hello
  
  I work with an IBM Java product that uses Oracle JDBC version 9.2.0.3.0 for Oracle DB connectivity (from file ojdbc14.jar is).
  The IBM product running an Oracle view called V_NGSM_GET_NEID which is used for elements of research network names in the Oracle
  DB and return the partners '' code of assets '' if the node is found.
  
  The problem is for all a single query sent I see two queries by using a packet sniffer. See below. The first query I see on the network
  a the string "rowid," prefix (107 package 0x9b offset) to the list in the column specified in my policy. But the first request fails with
  the following error (112 package)
  
  ORA-01446: cannot select ROWID from view DISTINCT, GROUP BY, etc +
  
  After the above error is returned, I see immediately the same request sent again, this time without "rowid", prefix (113 package offset 0 x 94)
  This same behavior occurs for each query, each time which results in twice the number of queries required and is a big problem.
  
  Support IBM claims it's the JDBC Oracle driver, not their code, adding "rowid", at the request and return it
  less "rowid", if it fails.
  
  Does make sense to anyone? I can't imagine that Oracle would distribute such a driver.
  
  Comments? Thoughts?
  
  Below are the packets captured using Solaris/snoop. The number is package on the extreme left (e.g., 107-117).
  
  ------
  
  107 0.00121 ab9imdev01-> 142.178.32.219 Ack TCP D = 41521 S = 62881 push = Seq = Len 3275308205 = 193 Win 49640 = 3897618122
  
  0: 00 a 0 9193 0014 4f94 0800 4500 884c 8e7e. .~.... ... O L... E.
  16: 00e9 2440 4000 4006 0000 cfe5 1503 8eb2... $@. @...
  32: 20 dB f5a1 c339 3cad e850 eeca 5018 a231... ¢ 1.9 <... PI.p.
  48: 9551 0000 1 0000 0600 0000 0000 00C c1e8... Q............
  64: 1169 0001 0101 0103 0002 8021 0001 035F. i... ^... ! ...
  80:0183 00 0000 0004 7fff ffff 0000 0101 0D...
  96: 0000 0000 0073 656 c 6563 7420 726f 7769. . Select rowi
  112: 642 204th c 4554 574f 524bis 5f45 45 4 c 4 d 45 d, NETWORK_ELEME
  128: 204th 442c 4554 524bis 5f45 NT_ID, NETWORK_E 574f 5f49 4e54
  144: 45 4 c 4 d 45 4e54 5f4e 414d 4520 4652 4f4d LEMENT_NAME OF
  160: 204th 4753 4 d 55 5345 522e 2256 5f4e 4753 NGSMUSER. "V_NGS
  "176: 4d5f 4745 545f 4944 2220 5748 4552 M_GET_NEID 4e45" WHER
  192:4520 4e45 5457 454d 454 454c NETWORK_ELEMEN E 4b5f of the 4f52
  208: 545f 4e41 4 d 45 203d 2027 4544 544th 4142 T_NAME = ' EDTNAB
  224: 4453 4 C 41 4 30 3327 0101 0000 0000 0000 DSLAM03 D '...
  240: 0101 0000 0000 00...
  
  108 0.01144 142.178.32.219-> ab9imdev01 TCP D = 62881 S = 41521 grow Ack = Seq 3275308398 = Len 3897618122 = Win 11 = 32850
  
  0: 0014 4f94 884c 00 a 0 9193 0800 4500 8e7e... ... O L... ~.... E.
  16: 0033 2764 0000 3706 c7eb 8eb2 cfe5 20db. 3 would be... 7..... ...
  32: 1503 a231 f5a1 e850 eeca c339 5018 3d6e... ¢1.¡. PI... 9 = nP.
  48: 8052 1 d 57 0000 000 b 0000 00 0000 0100 0c. R.W............
  64: 01.
  
  109 0,00000 142.178.32.219-> ab9imdev01 TCP D = 62881 S = 41521 grow Ack = Seq 3275308398 = Len 3897618133 = Win 11 = 32850
  
  0: 0014 4f94 884c 00 a 0 9193 0800 4500 8e7e... ... O L... ~.... E.
  16: 0033 2765 0000 3706 c7ea 8eb2 cfe5 20db. 3' e... 7..... ...
  32: 1503 a231 f5a1 e850 eed5 c339 5018 3d6e... ¢1.¡. PI... 9 = nP.
  48: 8052 1c4c 000 0000 0000 00 0000 0100 0c b. R.L............
  64: 02.
  
  110 0,00008 ab9imdev01-> 142.178.32.219 TCP D = 41521 S = 62881 Ack = 3897618144 Seq = 3275308398, Len = 0 Win = 49640
  
  0: 00 a 0 9193 0014 4f94 0800 4500 884c 8e7e. .~.... ... O L... E.
  16: 0028 2441 4000 4006 0000 cfe5 1503 8eb2. ($A@.@.........
  32: 20 dB f5a1 a231 c339 3d6e e850 eee0 5010... ¢ 1.9 = n. Pi. P
  48: 9490 0000 c1e8...
  
  111 0,00019 ab9imdev01-> 142.178.32.219 Ack TCP D = 41521 S = 62881 push = Seq 3897618144 Len 3275308398 = Win 49640 = 11 =
  
  0: 00 a 0 9193 0014 4f94 0800 4500 884c 8e7e. .~.... ... O L... E.
  16: 0033 2442 4000 4006 0000 cfe5 1503 $8eb2.3 B @. @...
  32: 20 dB f5a1 c339 3d6e e850 eee0 5018 a231... ¢ 1.9 = n. Pi. P
  48: c1e8 b 949 000 0000 0000 00 0000 0100 0c b... \233...
  64: 02.
  
  112 0.00870 142.178.32.219-> ab9imdev01 TCP D = 62881 S = 41521 grow Ack = Seq 3275308409 = Len 3897618144 = 111 Win = 32850
  
  0: 0014 4f94 884c 00 a 0 9193 0800 4500 8e7e... ... O L... ~.... E.
  16: 0097 2766 0000 3706 c785 20db cfe5 8eb2... " f.. 7..... ...
  32: 1503 a231 f5a1 e850 eee0 c339 79 5018 3d... ¢1.¡. PI... 9 = yP.
  48: 8052 7b 48 0000 0000 0600 0000 0000 006f. R{H...o........
  64:0400 0205 a600 0001 0301 0700 0001 2000...
  80: 0000 0000 0000 0000 0000 0001 0147 4f52... GOR
  96: 412d 3031 3434 363 2063 616e 7420 A - 01446 6e6f a: cannot
  112: 7365 6 c 65 6374 2052 4944 2066 726f 4f57 select ROWID BOF
  128: 6 d 20 7669 6577 2077 6974 6820 4449 5354 m seen with DIST
  144: 494e 4354 2 c 20 4752 5020 4259 2 c 20 INCT, GROUP BY 4f55,.
  0a 632nd 160:6574 etc...
  
  113 0,00037 ab9imdev01-> 142.178.32.219 Ack TCP D = 41521 S = 62881 push = Seq = Len 3275308409 = 179 Win 49640 = 3897618255
  
  0: 00 a 0 9193 0014 4f94 0800 4500 884c 8e7e. .~.... ... O L... E.
  16: 00db 2443 4000 4006 0000 cfe5 1503 8eb2... $C @. @...
  32: 20 dB f5a1 c339 3d 79 e850 ef4f 5018 a231... ¢ 1.9 = y. P. OP
  48: 9543 0000 00b 3 0000 0600 0000 0000 c1e8... C............
  64: 0002 8021 0103 0101 7 c 01 010 035F d 0000. ^... ! ....| .....
  80: ff00 of ffff 0000 0000 0000 0000 5345 047f... IS
  96: 4 c 45 4354 204th 4554 574f 524bis 5f45 4 c 45 READING NETWORK_ELE
  112: 4 d 45 4e54 5f49 442c 204th 4554 524bis MENT_ID, NETWORK 574f
  128: 5f45 45 4 c 4 d 45 4e54 5f4e 4520 4652 ELEMENTNAME EN 414d
  144: 204th 4f4d 4753 4 d 55 5345 522e 2256 5f4e OM NGSMUSER. "V_N
  4745 545f 4944 2220 5748 GSM_GET_NEID 4e45 4d5f 160:4753"WH
  4520 4e45 5457 4f52 4b5f 454c 454d ERA NETWORK_ELEM 176:4552
  192: 454 545f 4e41 4 d 45 2027 4544 203d 544th ENT_NAME = ' EDTN
  208: 4142 4453 4 C 41 4 30 3327 0101 0000 0000 ABDSLAM03 D '...
  224: 0000 0101 0000 0000 00...
  
  114 0.01101 142.178.32.219-> ab9imdev01 TCP D = 62881 S = 41521 grow Ack = Seq 3275308588 = Len 3897618255 = 174 Win = 32850
  
  0: 0014 4f94 884c 00 a 0 9193 0800 4500 8e7e... ... O L... ~.... E.
  16:00 6 2767 0000 3706 c745 20db cfe5 8eb2 d... " g... 7..E... ...
  32: 1503 a231 f5a1 e850 ef4f c339 5018 3e2c... ¢1.¡. P.O.9 >, P.
  48: 8052 c84a 0000 0000 0600 0000 0000 00ae. R.J............
  64: 3175 787 101d 0000 0003 0000 3ed0 949d c... 1UX|...\235 >...
  80: 786d 080d 30 3900 7400 0000 0201 xm ed27 0d... 09.i't...
  96: 3401-0243-0200, 0116 0000 0000 0000 0000 4.C...
  112:0112 0112 124th 4554 574f 524bis 5f45 4 c 45. . NETWORK_ELE
  128: 4 d 45 4e54 4400 0001 8000 0001 1e00 MENT_ID 5f49...
  144: 0000 0001 1f01 0114 0114 144F 4554 574f... . NETWO
  160: 524bis 5f45 45 4 c 4 d 45 5f4e 4500 RK_ELEMENT_NAME 414d 4e54.
  176: 0001 0707 786 d 080d 1024 1508 0104 04a 7... xm... $...
  192: d5e0 0791 0103 0000 0004 0000 0000 fa02...
  208: 0103 0003 0000 0000 0000 0000 0000 0000...
  224: 0000 0101...
  
  115 0.00026 ab9imdev01-> 142.178.32.219 Ack TCP D = 41521 S = 62881 push = Seq = Len 3275308588 = 17 Win 49640 = 3897618429
  
  0: 00 a 0 9193 0014 4f94 0800 4500 884c 8e7e. .~.... ... O L... E.
  16: 0039 2444 4000 4006 0000 cfe5 1503 $8eb2.9 D @. @...
  32: 20 dB a231 c339 e850 5018 effd 3e2c f5a1... ¢ 1.9 >,. . P. P.
  48: c1e8 94a 1 0000 0011 0600 0000 0000 0000... ¡...
  64: 0305-0001-0301 0 has...
  
  116 0.10217 142.178.32.219-> ab9imdev01 TCP D = 62881 S = 41521 Ack = 3275308605 Seq = 3897618429, Len = 0 Win = 32850
  
  0: 0014 4f94 884c 00 a 0 9193 0800 4500 8e7e... ... O L... ~.... E.
  16: 0028 2768 0000 3706 c7f2 8eb2 cfe5 20db. ('h.. 7..ò... ...
  32: 1503 a231 f5a1 e850 effd c339 3e3d 5010... ¢1.¡. P.... 9 > = P.
  48: 8052 2973 0000 0000 0000 0000. R)s........
  
  117 0.27052 142.178.32.219-> ab9imdev01 TCP D = 62881 S = 41521 grow Ack = Seq 3275308605 = Len 3897618429 = Win 64 = 32850
  
  0: 0014 4f94 884c 00 a 0 9193 0800 4500 8e7e... ... O L... ~.... E.
  16: 0068 2769 0000 3706 c7b1 8eb2 cfe5 20db. h'i... 7..... ...
  32: 1503 a231 f5a1 e850 effd c339 5018 3e3d... ¢1.¡. P.... 9 > = P.
  48: 8052 d42a 0000 0040 0000 0600 0000 0000. R.*...@........
  64:0400 0205 7 b 00 0001 0300 0300 0120 0000... {........ ..
  80: 0000 0000 0000 0000 0000 0101 194f 5241... ORA
  6e6f 3 a 20 96: 2d 30 3134 3033 2064 6174 6120 - 01403: no data
  112: 666f 756 640 has found.

  Looks like you are saying that the Java source code can control completely if the driver will try to get the ROWID by requested ResultSet settings. Is this true?

  I think it should, Yes. I guarantee you that all versions of the driver in all cases would have a parameter that has ignored the attempt to insert of a ROWID. But I strongly suspect that he does not bother if the result set which had been requested was such that the ROWID would not be beneficial.

  I expect the pilot to understand the complete Oracle SQL grammar, it can at least add "rowid" in the place in the query

  There is a major compromise. It is incredibly difficult to support full SQL grammar correctly. Oracle used to SQL for SQL and PL/SQL engine analyzers and would regularly find bugs where a scanner heard something that does not have the other parser. When you put too much SQL parsing code in the driver, you finish by the two spend more time parsing SQL statements and you end by potentially limiting the set of queries that could be issued to the dialect of SQL that the JDBC driver has been aware of when it was shipped that sucks when you use to connect to a database of the latest drivers.

  I suspect (assuming that is not speaking on behalf of the JDBC driver development team) they thought it better to do the simplest thing possible, throwing the ROWID right after SELECT it. If it worked, great. If this is not the case, they encoururent the cost of a round trip and an analysis of the database which is probably at the same level as the cost of the analysis of the SQL locally and then just downgrade the result set. If you ask an editable ResultSet, for example, Oracle is unable to identify a single line, if you specify also SEPARATE in the query. Rather than trying to understand all of the cases where a query generates a result not set editable intrinsically, it is easier and more accurate to try to get a ROWID and downgrade the result set if the addition of a ROWID generates a syntax error.

  Of course, the costs and benefits of arbitration depend on the proportion of result sets which requires a feature that is not available with the SQL statements, they deliver some. If you have an application that makes 300 000 queries that have SEPARATE and ask a modifiable and capable of scroll cursor, it would potentially put more logic in the JDBC driver. If you have an application that always brings queries that can be changed using simple algorithm of the driver, the simple algorithm is obviously preferable.

  Justin

• Is this limitation just to query? OperationTimeIntervalFault: The query is limited to 1 request every 250 milliseconds (were 165 milliseconds since the last request)

  Hi all

  I encountered this error while getting all the data of Contact (call Query()) in my integration. I guess maybe it's because I do another query to display a preview of the data somewhere else with the same company and user name.

  I'd do something to try again when he meets, but I have a few questions.

  When you call ListEntityTypes(), DescribeEntityType(), DescribeEntity(), Create() or Update(), this anomaly would occur if both applications have an interval of less than 250 ms?

  These applications have the same restriction together or separately?

  BTW, in SOAP API, it is a FaultException < OperationTimeIntervalFault > exception. How about this question in the RESTful API? What is the type of exception? What is his message format?

  Thank you

  Biao

  Hey Biao,.

  This limit applies only to SOAP. Request function.  We shouldn't see any where else in the SOAP or REST API.

  Phil

• IOM account change request

  Hi all

  After completing all the code to change to the parent and child form data using tcFormInstanceOperationsIntf (setProcessFormData and addProcessFormChildData), I realized that these changes do not trigger an update of the account application.

  The requirement is that any update for update of the field (of parent/child), a request is supposed to be raised.

  I tried to find the following code, but it gives me exception.

  public String raiseAccountModifyRequest()

  {

  try {}

  Declaration/initialization

  OIMService oimService = (OIMService.class) oimClient.getService;

  RequestData requestData = new donnees();

  Recipient beneficiary = new Beneficiary();

  The list < RequestBeneficiaryEntityAttribute > benEntityParams = new ArrayList < RequestBeneficiaryEntityAttribute > ();

  RequestBeneficiaryEntityAttribute benEntityParam = new RequestBeneficiaryEntityAttribute();

  RequestBeneficiaryEntity requestEntity = new RequestBeneficiaryEntity();

  The list of entities < RequestBeneficiaryEntity > = new ArrayList < RequestBeneficiaryEntity > ();

  List of beneficiaries of < recipient > = new ArrayList < recipient > ();

  User information = 80 is the take

  beneficiary.setBeneficiaryKey("80");

  beneficiary.setBeneficiaryType (Beneficiary.USER_BENEFICIARY);

  UD_ADGRPMG_GROUPNAME is a field in the Parent of my Instance application form

  benEntityParam.setName ("UD_ADGRPMG_GROUPNAME");

  benEntityParam.setValue ("instance.");

  benEntityParam.setAction (RequestBeneficiaryEntityAttribute.ACTION.Modify);

  benEntityParams.add (benEntityParam);

  1851 is the oiu_key (the account I want to change this request/change)

  ADGroupManagementApplication is the name of the Application Instance

  requestEntity.setRequestEntityType (OIMType.ApplicationInstance);

  requestEntity.setEntitySubType ("ADGroupManagementApplication");

  requestEntity.setEntityKey("1851");

  requestEntity.setOperation ("MODIFY");

  requestEntity.setEntityData (benEntityParams);

  Entities.Add (requestEntity);

  beneficiary.setTargetEntities (entities);

  Beneficiaries.Add (beneficiary);

  requestData.setBeneficiaries (beneficiaries);

  Justification of String = "this is test justification."

  If (justification! = null & & justification.length () > 0)

  {

  requestData.setJustification (justification);

  }

  RequestService reqsrvc = oimClient.getService (RequestService.class);

  Dim str As String = reqsrvc.submitRequest (requestData);

  return str;

  } catch (OIMServiceException e) {}

  Generative TODO catch block

  e.printStackTrace ();

  }

  Return ' ';

  }

  The Exception I get (on the line in bold above) is: caused by: oracle.iam.request.exception.RequestServiceException: ADGrpMgmntFinalForm application cannot set or change the UD_ADGRPMG_GROUPNAME attribute, since it is not defined in the corresponding dataset.

  The demand side, you must assign values based on the labels of the fields, not the values UD_XXX.  Use the label that you would see in the user interface.

  -Kevin

• problem with user password change request

  Hi all
  
  I'm about to ask a question that I don't have much info. I'm not experienced with oracle forms or States but one my customer use them, my client decided to change the user password request forms and did. After that, developers are looking for config files and change the passwords in files of that too. is the application works fine but has reports of problems. as I said, there are two ways to run reports, web and run_product. When the URL is used, reports work well, but in forms (fmb) screens when the run_product procedure is used, they received the error "name of username/password invalid.
  
  even if they change the password user return application, there always the same error. should consider what could be the possible error and what are the files? I know, that it is forms 6i application.

  If your customer base is 11G, this could be a problem with the passwords case-sensitive. Try to set a password with only UPPERCASE letters.

• cfqueryparam change request?

  Hello, everyone.

  Got a weird problem (IMHO)...

  I have a SELECT query medium that takes four dynamic values - three for the WHERE, one for the ORDER BY clause.

  If I run the query in a CFC method without using CFQUERYPARAM, it works exactly as expected.

  If I use CFQUERYPARAM on everything from the WHERE clause, it ignores the ORDER BY and returns the data just as it is.

  What is going on???

  Thank you

  ^_^

  If this:

  SELECT a.colA, a.colB, a.colC, b.colC, b.colD, c.colA, c.colC, c.colD, d.colA, d.colF

  From tableA and b LEFT OUTER JOIN tableB on a.id = b.id

  LEFT OUTER JOIN tableC c on c.id = a.id

  Deposited d on d.tid = c.tid LEFT OUTER JOIN

  LEFT OUTER JOIN table e on e.org = b.org

  WHERE d.tid = [number of training] AND [approval number] = c.auth AND b.year = [4-digit year]

  ORDER BY #by #.

  looks like your actual query, you have a logic problem.  You are specifying left joins in tables b, c and d and then using these tables in which your article.  This changes your outer join to an inner join.  Fix you by moving these filters to your clause, like this:

  from tablea a join left tableb b on b.id = a.id and b.year = [4-digit year]

• Preparer of the change request submit it after

  Hi all experts...
  
  I have a situation of order picker, this situation is:
  I want to change the order picking, while the application is submitted (which means status = rejected, returned, In Process, pre-approved or approved). I know you have questions about this situation, why you need to change the preparer?
  
  I need to change the preparer because sometimes:
  1A retired.
  2. has left.
  3. on vacation and he did not have a delegation.
  4. .. etc., there are many cases may need that.

  Hi, Ahmed.
  We're sorry, we couldn't be able to find a workaround for you: (...) Since you are using a lower version of R12, there is no such a request is to change the name of applicant trainer in 1 GB... Karthik & Shivraj also gave their valuable contributions, but it seems that nothing works for you...

  Would you mind to ask the same question to Oracle via a SR Oracle? Make reference to the version of Oracle Apps you use...

  Oracle can give an idea of box, you never now out... Just give a try.

  Kind regards
  S.P DASH

• API change request AbstractAssembler

  We use a common base class to process most of the functions in assembler without writing a separate DAO class for each destination. The only problem we have in this design uses the API functions in AbstractAssembler which give no reference whatsoever to the class of object to act on. Such a function is getItem (Map). The card contains only information from id, without reference to this kind of object to be retrieved. If the destination string is included, or a class of object, we could get any record in the system by writing a single function.
  
  We have written our fill routines to pass in a name of object class, so a fill feature can be written which distributes the correct query logic. And, with the creation, update, delete, we have an object of the appropriate type passed, so our persistence framework takes care of the rest.
  
  This reduces the workload of programming server-side. We spend our time writing a logic instead of the plumbing... When designing features FDS, please remember that FDS users want to use frames in our applications, not brute force programs... After all, this is why we use Flex in the first place. Thank you.

  I just noticed an AbstractAssembler property that will significantly help with that - the destionationId is filled in each call to the assembler, which is great!

• Running query when the display changes of value of box

  Hello everyone, I have a little problem. In my form, I have 2 rematch, the first will contain only a display element that is filled with a lov when a user presses a button. The second poster datablock a list of items that should be queried depends on the value of the LOV above. What I thought I could do are on a trigger after change of the displayed element is:
  
  go_block ('block_name');
  do_key ('execute_query');
  
  However, I am told that I can't do these in a trigger of change, someone would have suggestions on how to get what I'm looking for. I should maybe create my own trigger somehow or is their most simple way.
  
  Thank you
  
  
  
  
  
  
  
  
  
  
  I have 1 datablock consisting of 1 single view point which is filled when a user presses a button that displays in turn a LOV for the user to select a value of. When the value of the displayed item changes,
  
  Published by: 786733 on August 24, 2010 01:28

  Hello

  Try to use the KEY-LISTVAL trigger in the element where the lov is attached. Something like that...

  LIST_VALUES;
  IF :item_name IS NOT NULL THEN  -- Here item_name is where the LOV will return value.
    GO_BLOCK('block_name');
    EXECUTE_QUERY;
  END IF;
  

  -Clément

• Unable to load the query in Crystal Designer: error "Could not load the Query builder compenent."

  Hi all
  I am using Crystal report 10 which was an upgrade of crystal 7 and 8.5
  I can open the crystal report and can do everything but I could not display the SQL query option
  It gives me an error message
  "Failed to load the Query builder compenent."
  I also reinstalled the application twice as a sysadmin even then I get this message
  Please, can someone suggest me what should I do?

  Contact technical support for Crystal Reports or watch in their forums. This is not a product of MS and is not related to the installation, upgrade and activation of Windows XP.