My recommended tables & Albums

Similar Questions

• How to convert the layout of this table?

  I'm trying to convert to Dreamweaver, a layout that I created with tables in KompoZer.

  There are several tables, nestled inside the other and it works very well, but as you know KompoZer has its problems and now I want to switch to Dreamweaver for this new Web site.

  It seems that Dreamweaver recommended tables for layouts. Is this true? Why?

  And if it is true, how do I convert my layout?

  This provision is in fact a model I want to use again and again for the recipes.

  Thank you.

  Gina

  Note that the bar of navigation and the right column are built separately, so that they are not part of the layout I'm trying to re - create.

  I'm not sure I understand what you mean by that.

  The navigation bar and RightSideBar seem to be part of the General layout of the page.

  Do you mean that these areas are populated with Server-Side Includes?

  The General layout is 3 columns, is pretty basic.  #header, #wrapper, #leftSideBar, #mainContent, #rightSideBar & #footer.

  http://ALT-Web.com/templates/3-col-semi-Liq-layout.shtml

  The #mainContent area would require additional tanks and margins to manage the image of the recipe, #leftColumn and 3 horizontal boxes down. Not rocket science, but some experience with CSS and lines fleet is required.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• How can I get used five albums of table employees through SQL?

  I want albums n number of result of the table through SQL... as max 5 salaries employees...
  Thanks... :))

  select * from (select empno,empname,sal, rank() over (order by sal desc)rn from employee) where rn<=5
  

  Try this... Certainly will help you.

• Setup followed use - location for new tables recommended

  Hi all
  
  Small question about the installation program for the use of follow-up in OBIEE. Someone at - it recommendations or best practices for the following questions regarding adding of new paintings that followed its use requires:
  
  1. don't you typically add the use of follow-up for the notification schema itself tables or you have a new scheme created for these tables to manage separately the scehma statement? Especially for OBIA, create the tables in the schema BAW track usage or have a separate created.
  
  2. for both Pools of connections that need to be configured (monitoring of its use Connection Pool and usage writer followed by Connection Pool), you recommend establishing a user account separately for these Pools of connections or using the same user account that is used for the statement?
  
  Thank you
  
  k

  Hello

  Yes, you must create all tables in a separate schema. Even in applications of BI SPR, they gave a separate connection pool that points to another schema.

  Kind regards
  Sandeep

• East - the usual/recommended that users have TABLEs in the spaces of multiple tables?

  As I discovered new TABLEs of users created in spaces of multiple tables for example
  SYSTEM and USERS. In other words some tables is implemented other SYSTEM in USERSs.
  
  Is - this normal/recommended?
  
  Prevent the creation of TABLEs in the TABLESPACE "SYSTEM"?
  
  Suppose a user bulletins 'karl' CREATE TABLE command without specifying the target TABLESPACE.
  
  What determines in what TABLESPACE this TABLE is created?
  
  Peter

  A user can create its tables in different tablespace when there quota on special tables,

  If the default tablespace is not given while creating the table then default tablespace for the user schema will be used.

  To restrict the use of the SYSTEM tablespace, use the command below

  SQL > alter user scott quota 0 on system;

  Modified user.

• last query in the table with double album

  Hi I have values in my table which seems to duplicate, but they are now, the use case is use application value and based on this value constract the query to return values using can see, e.g I have the card table

  CREATE TABLE CARDS

  (Primary key CRDIND NUMBER (2.0),)

  CRDPOS1 VARCHAR2 (2 BYTE),

  CRDPOS2 VARCHAR2 (2 BYTE),

  activedate DATE,

  inactivedate DATE,

  CARDNAME VARCHAR2 (50 BYTE)

  )

  Insert in card values (1, null, null, TO_DATE (' 03/05/2003 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), null, 'VISA');

  Insert in card values (2, null, null, TO_DATE (' 03/06/2003 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), TO_DATE (' 03/07/2003 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), 'VISA');

  Insert in card values (3, null, null, TO_DATE (' 03/08/2003 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), null, 'VISA');

  Insert in card values (4, null, null, TO_DATE (' 03/06/2003 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), TO_DATE (' 2003/07/10 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), 'VISA');

  Insert in card values (3, null, null, TO_DATE (' 03/09/2003 21:02:44 ',' yyyy/mm/dd hh24:mi:ss'), null, 'VISA');

  using enter value VISA to query the last disc

  If you want to filter on the cardname in the outer query, you need to return this column in your query inside...

  SELECT inactivedate

  FROM (SELECT inactivedate

  cardname

  , ROW_NUMBER() over (partition cardname ORDER BY inactivedate DESC, activedate DESC) AS ORDER_NUM

  CARD

  )

  WHERE order_num = 1;

  AND cardname = "VISA";

  HTH

• Download the latest album among several tables

  Hello guys,.

  I would be really grateful if you could help me find a solution to this problem I am facing:

  We are on Oracle 11 g Release 2.

  I have 3 tables A, B and C, all the 3 tables have the following columns with the same names:

  data_load_time DATE

  data_load_process VARCHAR2 (100)

  data_update_time DATE

  data_update_process VARCHAR2 (100)

  And also a foreign key - fkey NUMBER.

  Now it takes - to a particular fkey (say 100), I need to pull the process between the 3 tables and last time, it is not okay if

  This is the load or update columns, I just need 1 set of values, the maximum time and the process corresponding to.

  For example: say for fkey = 100, I get the maximum time and the process corresponding to table A, then I get time max and the corresponding table B and table C process, the end result should be the maximum time and the corresponding process on the 3 values, I just pulled out of the 3 tables separately.

  Is it an effective way to address this problem in only 1 query?.

  Thanks for your help.

  D

  Use my query and you will see tghat everything is correct and don't worry function max (read about features analytical Dungeon dense_rank first/last)

  Here's the result of my query with your sample data:

  WITH AN ACE

  (SELECT fkey 100,

  1 January 2013 ' data_load_time,.

  "XETL' data_load_process,

  11 July 2013 ' data_update_time,.

  'MANUAL' data_update_process

  THE DOUBLE).

  B AS

  (SELECT fkey 100,

  5 January 2013 ' data_load_time,.

  'DATA_ENT' data_load_process,

  25 April 2014 ' data_update_time,.

  "VEND_X" data_update_process

  THE DOUBLE).

  c AS

  (SELECT fkey 100,

  1 January 2014 ' data_load_time,.

  'MANUAL' data_load_process,

  3 February 2014 ' data_update_time,.

  "CLM_PROC" data_update_process

  THE DOUBLE)

  Select greatest (max (a.data_load_time),

  Max (b.data_load_time),

  Max (c.data_load_time)) max_data_load_time;

  Decode (Greatest (Max (a.data_load_time),)

  Max (b.data_load_time),

  Max (c.data_load_time)),

  Max (a.data_load_time),

  Max (a.data_load_process)

  keep (dense_rank of the first order by a.data_load_time desc),

  Max (b.data_load_time),

  Max (b.data_load_process)

  keep (dense_rank of the first order by b.data_load_time desc),

  Max (c.data_load_time),

  Max (c.data_load_process)

  keep (dense_rank of the first order by c.data_load_time desc)

  ) data_load_process,.

  Greatest (Max (a.data_update_time),

  Max (b.data_update_time),

  Max (c.data_update_time)) max_data_update_time;

  Decode (Greatest (Max (a.data_update_time),)

  Max (b.data_update_time),

  Max (c.data_update_time)),

  Max (a.data_update_time),

  Max (a.data_load_process)

  keep (dense_rank of the first order by a.data_update_time desc),

  Max (b.data_update_time),

  Max (b.data_update_process)

  keep (dense_rank of the first order by b.data_update_time desc),

  Max (c.data_update_time),

  Max (c.data_update_process)

  keep (dense_rank of the first order by c.data_update_time desc)

  ) data_update_process

  a

  Join b

  On a.fkey = b.fkey

  Join c

  On a.fkey = c.fkey

  where a.fkey = 100

  SQL >

  60.

  MAX_DATA_LOAD_TIME DATA_LOAD_PROCESS MAX_DATA_UPDATE_TIME DATA_UPDATE_PROCESS

  -------------------------------- -------------------------------- -------------------------------- --------------------------------

  VEND_X JANUARY 5, 2013 DATA_ENT APRIL 25, 2014

  SQL >

  ----

  Ramin Hashimzade

• ESX host with local storage recommended for the host partition table?

  Hi all

  I know that the best practical partition table should look like this:

  Mount Point	Partition	Size	Description
  		/ dev/sda (primary)
  / Boot	ext3	250 MB	Change of extra space for upgrades
  N/A	SWAP	1 600 MB	Change the maximum size of Exchange service console
  /	ext3	5120 MB	Change of extra space in the root
  		/ dev/sda (Extended)
  / var	ext3	4096 MB	Create partition to avoid an overflow of root with log files
  / tmp	ext3	1024 MB	Create partition to avoid an overflow of root with temporary files
  / opt	ext3	2048 MB	Create partition to avoid overfilling root with the log files of VMware HA
  / Home	ext3	1024 MB	Create partition to avoid an overflow of root with agent / user files
  	vmkcore	100 MB	Pre-configured

  However with a system with local storage would you set it up the same way, and whatever it is must be amended to change to get ESX to write log files to the different partitions?  I would like to configure it for future expansion for when the enterprise package is configured.

  Yes, I would set up the same way with an ESX with local storage server and nothing needs to be changed for the vmekernel right at the partition/var - unless of course you want to write to a log server that you need to change a configuration file to point to the server logs.  If you talk to the ESX Enterprise license you willnot have to change partiition table-

  Also on something else if you don't have a SAN/NAS storage you will also need to create a VMFS partition on the local data store to host your virtual machines

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• What is the recommended value of pct_increase on tables and storage

  Hi all.
  
  SQL > select * from v version $;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64 bit Production
  PL/SQL Release 9.2.0.4.0 - Production
  CORE Production 9.2.0.3.0
  AMT for Solaris: release 9.2.0.4.0 - Production
  NLSRTL Version 9.2.0.4.0 - Production
  
  SunOS rcworaprd 5.9 Generic_112233-07 sun4u sparc SUNW, Sun-Fire-480R
  
  This who should I set the pctincrease value? I see some articles mention 0 or 100 so we have beautiful stretches even, others simply mention to adjust accordingly. We are witnessing at the moment is:
  
  I'll put the next measure on MFG. TBL_REQUIREMENT_CLONE 5 M and pctincrease at 50 (its size increase of the parameter in the storage OEM tab)... last night we had a batch run and we were see errors in the log of alerts for her:
  
  ORA-01653: unable to extend table MFG. TBL_REQUIREMENT_CLONE by 1005309 in the tablespace USER_DATA
  
  And when I check the MFG. TBL_REQUIREMENT_CLONE there the next measurement value 1005309K, not the 5 M.
  
  Any advice on why this would be appreciated.
  
  Thank you

  Hello

  If you used the procedure below to migrate to managed locally, then it would still continue to show the behavior of dictionary managed tablespace.
  You can confirm this by checking allocation_type in dba_tablespaces. For locally managed tablespaces it SYSTEM/UNIFORM. But in this case (migrated tablespace), it would be the user.

  Onlly I see is to define pctincrease 0.

  dbms_space_admin.tablespace_migrate_to_local
  

  Concerning
  Anurag

• song plays again and again, can not read albums

  after update 10 iOS on iPhone 5 Asia, iTunes 10.0.1 will only play individual songs not albums. It doesn't seem to be a way for me to select shuffle play all or repeat. the icons are simply not there. anyone else having this problem? Difficulty?

  Hello Dr. Skydog,

  Welcome to the communities of Apple Support!  If your music does not play as expected after the update to iOS 10, I would say to force you to leave the music application, restart your iPhone and try again.

  Force a nearby application on your iPhone, iPad or iPod touch

  Choose how to sort songs
  Tap Settings > music > sort songs and Albums
  You can choose to sort your music by artist or title

  Select the category of the Album, turn Shuffle on and off
  In the home screen, tap the music app, tap the library (bottom left), tap Albums
  Tap an Album to select.
  You can press any of the songs in the album to play them individually.

  Current playback
  At the bottom of the screen, if you tap on the little icon of the album (or the title of the current played song), you have the right to see the full-screen playing .  At the bottom of the screen you will see the shuffle and repeat the icons.  If you type shuffle, you will see a pink box will surround the icon because it is activated.

  If you press the top of the playing screen, it will minimize the window.

  Take a look at the section music update iPhone user Guide for iOS 10 for more information.
  (Click on the Table of contents, and then click Apps).

  Take care.

• Why my ipod has several copies of the same album on my ipod, but only one on my list of itunes

  My ipod has several copies of both albums, but I only have everyone on my list of itune. Synced the ipod, but it remains the sam (several copies of both albums)

  For general advice, see grouping of tracks in albums . Older IPod such as classic to do not apply artist album so an album that looks OK in iTunes can break upward on the device. I recommend using a consistent value for the artist and the artist comments/featured information moving in the track names.

  TT2

• Help: Autofill numbers in drop-down list to another table

  Hello world

  Does anyone know how to automatically fill in a table of the value of the other table, based on the selected menu drop-down on the main table.

  

  As you can see on my pictures, my main table, I have a drop down list, so I have to be able to automatically to the second table based on the category that I chose to put the quantity. For example, I choose LIFE, then the amount will also be the second table where the arrow is pointing. What will be the formula on the designated table?

  Thank you.

  Hello Adrian TitikTemu,.

  As a reminder, you want autofill value of 1 sheet on a column on sheet 2 in number. One of the members of our community of colleagues gave some great instructions on how to proceed in this post:

  https://discussions.Apple.com/thread/7554247?start=0 & tstart = 0

  The response of Apple recommends that Barry has a few milestones to help in a situation like this.

  Best regards

• I lose albums in my iTunes library if I get Apple music?

  My iPad 2 has not been synchronized Age and has albums that I paid for that are not on my iPad 2 Air and are no longer in the iMusic store.  I lose even more if what I paid for, if I can get music Apple?  I will answer my albums and missing titles if I get Apple music?

  Hi toddfrommatsudo,

  Thanks for checking out the Apple Support and communities for detailed information about your music. I understand that you do not want to lose access to one of your music and have questions on sign up for a subscription to Apple's music.

  Your already purchased albums are concerned, you can download one of your recent purchases using your Apple ID at any time. There are different steps depending on the device you use, but you can find all the steps to achieve this in the link below. However, it is important to note the following information at the bottom of this article:

  Previous purchases may not be available if they have been repaid or are not on the iTunes Store.

  Download your purchases past - Apple Support

  To answer your question about the Apple's music, none of your music is deleted when you join, but it is always recommended that you back up your library first to ensure that your data remains secure. These articles provide information on what to do before joining Apple music, how to register for Apple music and FAQS on membership.

  Apple music - Apple Support

  Join the Apple music on your iPhone, iPad, iPod touch, Mac or PC - Apple Support

  Music - membership - Apple

  See you soon!

• Why the buttons of the table in a bad position only on Firefox?

  http://aandrroofing.com "project gallery" and "contact us" buttons appear below bottom of table and high background appears below them. Works perfectly on IE and Chrome.

  With regard to the positioning of the button: you have a tag paragraph inside these cells in a table of four:

  <td>
   <script>... </script>
   <p>... </p>
  </td>
  

  Normally, a paragraph element has an upper and lower margin equals the standard height of a line. Internet Explorer removes those margins when they are adjacent to the top and bottom of a table cell boundaries. Firefox does not work.

  In this case, it would be simpler to delete the p tag, because there is really nothing obvious.

  If you choose to keep the p tag, you need to remove these lines yourself. You can do this manually by adding an inline style to the tag:

  <p style="margin-top: 0; margin-bottom: 0;">...
  

  Or you can add a CSS rule to make it around the world. It is somewhat complicated by the fact that you have another (script tag) tag before the p tag in your table cell, so I'll refrain from publishing a convoluted fix and recommend go with either of the two previous suggestions.

• Can not put just one or two albums on my iphone without songs that I deleted previously being in sync too

  I've had this problem for a while and can't seem to find what I'm doing wrong. Whenever I drag an album on my iphone it says "update files" and then more than 200 songs that I deleted are back on my phone. Cancel the update, but this happens every time

  I would recommend the synchronization of the device with a playlist selected, rather than manage manually. You update the playlist and then synchronize to update the device with the changes.

  The following steps should resolve problems with the device, do not sync what is selected, or to remember a previous selection, copying it back.

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  TT2