ESX host with local storage recommended for the host partition table?

Similar Questions

• View Load Balancing Hosts with local storage

  Hello

  After the use of VMWare for server virtualization, it is time to move to the next step.

  We are in the middle of a display driver 5 :-)

  At the moment I have 2 host vmware (esxi 5) with storage connected to a San.

  My "master VM" is in the SAN and connected to two hosts.

  A pool is created and data warehouses them are selected for the pool.

  The replicas are created on two local data stores when I set up the pool.

  At the time, my drivers 10 users working on a related Clone which is located on the local storage.

  The strange thing is that all users are running on a single host.

  East on the host with the most free space.

  When I remove the data store, the virtual machine is created on the other host.

  After adding it, are all the vm on the store with the largest disks again.

  How can I configure display to use the two hosts?

  This is a normal behavior of View Composer to put desktops on the storage the largest space available. You can change this behavior by adjusting storage approval settings. Take a look at this blogpost:

  http://www.simonlong.co.uk/blog/2011/02/09/VMware-view-4-5-rebalance/

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• It is possible and effective: high availability (failover) on 2 guests with local storage?

  Hello

  I have a discussion on the implementation of ha (failover) with 2 guests with local storage.

  My advice is to go with a shared storage. But there is another view, use the cluster failover MS with local storage service to save on the shared storage hardware.

  2 "mirorred" on each host machines. Is it feasible at all?

  The HughesNet: have 2 virtual machines (SQL server and server applications in a highly available environment). The workload of the machines will be raised to 2 very powerful servers that are supposed to be buying.

  1. Please briefly explain a feature of local storage to provide HA.

  2. I got to cluster in the virtual environment, not so I guess that the shared storage is used only in the virtual environment.

  Thank you.

  Michael.

  There is software that can replicate a running, physical or virtual machine to another accessible location on the network. This could be as simple that between two close hosted ESXi of VMS or high-speed WAN. Take a look at things like neverfail, doubletake others.  The costs would probably be a bit prohibitive in a smaller environment. It might be possible and maybe even practice to use a virtual storage device having a failover replication. Use of storage on each host and allows to provide the data store. Open-e

  The Microsoft Clustering solution needs a shared storage.

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Recommendations for the best 3D modeling App / program?

  Does anyone have a recommendation for the best 3D modeling application / program?

  (More for the creative rather than animation games and computer work)

  Thank you

  Hello

  I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.

  See you soon,.

  Adam

• Error: The application-specific permission settings grant Local Activation permission for the COM server application in the Windows XP computer.

  Original title: DCOM {E9F9ED00-7705-101B-9802-0000C07B665C}.

  I have this message DCOM in the registry: "the application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E9F9ED00-7705-101B-9802-0000C07B665C} server application the user... xxxx...". (I deliberately placed the "xxxx" instead of my current PC for security reasons). This security permission can be modified using the Component Services administrative tool." I tried to look through the forum here, and I found elements that were close and others are not. so if anyone knows where I can go make the adjustments, it could save our society approximately $10K, because my new bosses are ready to install all new hardware and software, but if we could find a much simpler approach to this problem, this would make the new kid on the block like a champ look.
  We have a Window XP, the flat touch screen PC, running a few packages of software reviews that keep a record of our SCADA system trend.

  At random times around the clock, the PC will just restart and return to the logon screen. There is no other necessary users, so we have only the journal administrator form. As soon as we open the administrator it is specially configured to run a specific program of our choice, but if the PC keeps restarting whenever it feels like it, there is no history chart tend to save. It is essential, that we need.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• I need a download of software recommended for the Transcriber ICD-PX312 for Windows 7.

  I installed the software that came with the ICD-PX312 on a windows system 7 and it crashes constantly. I need a download location for the software recommended for the valid software for the Windows 7 platform.

  all links will be useful.

  Hi Tim,.

  Welcome to the community of Sony!

  Download and install the latest version of the software of the Organizer from the link below:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ICDPX312&upd_id=8218&os_group_id=5

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• determine the storage space for the upgrade of the APEX

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  
  

  How can I determine which user is the " " " User of the oracle Application Express application" and which the user is the user Oracle Application Express 'files' (if I can then watch their default storage spaces)?

  
  

  
  

  Hi Mimi Miami,

  Mimi Miami wrote:

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  How can I determine which user is the user Oracle Application Express 'application' and that the user is the user Oracle Application Express 'files' (so I can then look at their default storage spaces)?

  APEX 3.2.x installation that follows is users:

  • Oracle Application Express Application user: APEX_030200
  • Oracle Application Express user files: FLOW_FILES

  So to determine the tablespace_apex and the tablespace_files you must connect with the user sys with sysdba privilege and run the following query:

  SELECT USERNAME
       , DEFAULT_TABLESPACE
    FROM DBA_USERS
   WHERE USERNAME IN ('FLOWS_FILES','APEX_030200')
  

  Then use the APEX_030200 user as tablespace_apex tablespace and a tablespace of the FLOW_FILES user as tablespace_files.

  I hope this helps!

  Kind regards

  Kiran

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• Format recommended for the PDF author metadata

  Hello

  I work as a librarian and I am responsible for the Department of the thesis of my University Library. These are filed and archived as PDF files. Some of them are available online, some are not.

  I was told to systematically fill metadata "Title" and "Author" for each PDF deposited in our electronic despository.

  My question has to do with metadata "author." Is there a structure recommended for her?

  As it is I can think of a lot of different alternatives:

  First name last name

  LastName Firstname

  LastName, Firstname

  etc.

  As a librarian, my instinct was to choose the name, first name format (used in the author/creator DC element, for example), but I realized that whenever I have saved the PDF file and then displays the part of metadata (via the shortcut Alt D), it would show "Lastname, Firstname" rather than the full name (for some unknown reason, adds Adobe Pro "" ""). After some tests, I came to the conclusion that the coma was the source of the problem. So I changed my mind and adopted the format Firstname Lastname , but I'm not sure that this is the best option.

  So if I ask you a few questions, here they are:

  -Which format do you recommend for the metadata of the author (if there is one)?

  -Why a coma generates ""?

  Is there a specific separator character that I use when I need to fill two different names (if a given thesis has been written by two different people)? (this issue also applies to metadata "Key words")

  Thanks for your patience and for your time,

  See you soon,.

  JHM

  There are no rules in itself, but the XMP specification defines DC: creator as a ProperName field, which means it must be written in the way he would say - "John Smith" rather than "Smith, John". Finally, it is until you do with data - if your external search system to priority of family name, do it.

  The fields on the tab of "description" of PDF Properties dialog comes from this Document information block in the standard PDF file, which is independent of the XMP metadata. Although these fields of DI are often people will look on, in a formal catalog system the XMP object has priority (indeed, in the ISO PDF/A standard that you are supposed to ignore completely DI fields).

  Document Information fields are stored in the PDF file as strings rather than the XML entities. Commas would confuse the parser in thinking it was to see a table, so they will trigger Acrobat in order to encapsulate the entries between quotes. He will assume a comma and a single space are part of an individual term, if you want to create a list using the semicolons or several spaces between words. Senicolons conquer spaces:

  • Doe, John; Lord Lucan; Barney, the Purple dinosaur will be kept at the "Doe, John"; Lord Lucan; 'Barney, the Purple dinosaur'
  • Is no one, no one will be kept to the ', that is, not a "; person because the spacing is a term separator.
    

  The important thing to remember is that the entrance of DC: creator XMP is updated whenever you change the author field of DI, but it does NOT follow the same rules. ProperNames XMP are OK with spaces but they don't like commas or semicolons - so the first example above appears in the tree view of XMP as

  1. DOE
  2. John
  3. Lord Lucan
  4. Barney
  5. Dinosaur
  6. the
  7. Purple

  This reinforces the idea of using names as spoken. Lord Lucan has survived his trip to XMP, John Doe became two people. Barney is beyond hope. in many ways.

• Recommendation for the configuration of the disk

  Recommendation for the configuration of the disk:

  A wide range of RAID 5 consisting of 8 x 146 GB drives?

  Two arrayys of RAID 5 with 4 x 146 GB drives in each table one would be used for the data store, and the other would be usd to images of backup to it.  The idea here is that when we do backup via the script GhettoVCB/o would be mainly on the secondary RADIUS and not the main data store.   In my opinion?  I think I have the only RAID 5 Bay with all the readers of 8 x 146 GB for a data store single should surffice.   I don't think the performance problems will be that detrimental.

  Do not hesitate to offer advice on scenarios, thank you

  Engineer accommodation

  ModusLink Open Channel Solutions, Inc.

  As written before, depends on the type of e/s.

  With more than R and W low, RAID5 (on multiple disks) could be very good.

  But don't forget to also use a global hot spare, degraded performance a RAID5 mode could be dramatic.

  And don't forget that your controller has a battery backup.

  André

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.