My Satellite L500 finish restoration of ti back factory settings
Well, then I restored my computer laptop back to factory without a disc because settings that I didn't and don't have I not of the recovery disks. It gets to the point where its says the facilities of finishes and just never ends.
Could someone help me please.
I can not do again because when I fress F8, the repair option does! PS I'm not very technical, so please try to speak simply.
Thank you
> I'm not very technical so please try to speak simply.
At this point, you will not be able to use the recovery saved on your HARD disk image. in other words - you need recovery DVD for installing the OS.
Recovery disk Toshiba original that can be ordered on https://backupmedia.toshiba.eu/landing.aspx
Sorry, but I see no alternative for you.
Tags: Toshiba
Similar Questions
-
How to restore the computer to factory settings?
I want to restore my computer back factory settings im tp do not know how to do that please inform me on what I do you solved the problem
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
-
Satellite A200-17O - how to restore Windows to the factory settings?
Hello
I have a Satellite A200-17O. I want to restore Windows Vista to factory settings, I did not need to backup all the files. I don't have the product recovery CD. When I press F8 and click on the "Repair" option, it will give me all the options, but when I click on the option to completely recover the system (the one on the bottom), it will simply open a window telling me to back up my data, then theres a button 'OK', and when I click that, the window will simply close and return to the menu options. All I want is to return Vista to factory settings.
Thank you for your help.
Hello
Yes, normally you can restore your computer laptop initial configuration using disk HARD recovery option. Therefore, you must follow the instructions here:
http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htmIf it doesn't work, you need to use the Toshiba recovery disc. If your computer laptop didn t come with such a recovery disk you create yourself using recovery preinstalled creator tool. This is mentioned in your user manual, have you checked it?
Therefore, you need a few blank DVDs. I recommend the DVD-R from Verbatim or TDK. Many users here have a good experience with these brands.
If you have any other questions, just after again! ;)
-
When I restore vista to the factory settings, what updates to this what I need to do? I just install sp1 & 2? My computor is 5 years, so a lot of updates are needed.
Hello
You will NOT be offered SP1 via Windows Updates as Support for Vista without SP1 is finished.
Click Start > right click computer > left click on properties > it will tell you it if you use Vista 32 bit or 64 bit Vista.
You need this information to make a direct download the correct version of 'bit' of SP1.
Once you have select the SP1 correct 'bit' download from these links:
Vista SP1 32-bit (x 86): http://www.microsoft.com/download/en/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/download/en/details.aspx?id=21299
After you download and install SP1 in this way, you should be able to use Windows Update to get the rest necessary updates, including SP2.
See you soon.
-
My Vista computer is slow and also I can't restore my computer to factory settings.
Original title: a new manufactor
My computer runs very slowly and ive lost the disc I have an everex computer and it runs vista im trying to get back to manufactor. Ive tried the basic backup and restore but it allow me to choose a restore point when I brought. Please help someone
Hello
1. What is the brand and model of the computer?2 How long have you been faced with this problem?
I suggest you try the step provided for in sub articles to solve the problem of vista performance.
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-outMeasures to restore the computer to factory settings depends on the manufacturer of the computer. Then I suggest you contact the manufacturer of the system or to check in the manual of the computer or we say the brand and model of the computer so that we can help you.What is system restore?Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.
OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?
If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.
-
Z220 CMT Workstation: restore the system to factory settings.
Model: Hp Z220 CMT Workstation
OS: Windows 7 Professional
I'm trying to restore my computer to factory settings. I pressed ESC several times at the start to the top of the computer. Select the system restore, but the computer just hoot to Windows form. I can not connect to windows, because as some error loading windows.
Is there another way for me to restore the system to factory with a clean Windows 7?> is there a way for me to get the recovery disk?
Two ways:
1. in Windows system work, running the same version (32-bit? 64-bit?), you can burn a disc of "recovery."
2. find a friend with a 'detail' in the Windows 7 operating system DVD (remember this is the same 32-bit or 64-bit, your system) and borrow the DVD of him/her, or get him or her to burn a copy of it.
-
Restore your PC to factory settings
I would like to restore my HP slimline to destop factory settings. It works on Windows 7 and got a recovery partition. I also got two additional partitions (partitions of data). My question is: if I restore the computer to factory settings will be my deleted data partitions?
Thank you
Yes, but you cannot use the recovery partition.
Here's how:
If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.
Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.
Use 25 characters on the PC product key to activate the installation.
The key will activate a 32 or 64 bit installation.
Then go to the support of the PC and driver page to install the drivers you need.
Link to downloads ISO of W7 is below.
http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/
Paul
-
Lost files that needed to be stored in Vista after restoring my computer to factory settings
I restored my computer to factory settings, and I clicked on an option in the process which was to store files that are stored in a folder, cannot find it. I use Windows Vista.
Thanks for your help
Jason
Hi Jason,
Since you did a factory restore, you must get in touch with the manufacturer of the computer, for assistance in the recovery, files.
You can also use your favorite search engine looking for a third party recovery tool recover files.
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information is useful.
-
I had to restore my computer to factory settings and now I can't get on the internet
I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7
Hello
When you perform a restore, you may need to reinstall the network drivers, etc..
As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.
Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.
Driver downloads:
Acer:
http://us.Acer.com/AC/en/us/content/drivers
ADVENT:
http://www.adventcomputers.co.UK/product-downloads
Alienware:
http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx
ASUS:
Dell:
http://www.Dell.com/support/drivers/us/en/19/ProductSelector
eMachines:
http://www.eMachines.com/EC/en/us/content/drivers
Fujitsu:
http://www.Fujitsu.com/us/support/
Gateway:
http://us.gateway.com/GW/en/us/content/drivers-downloads
HP:
http://WWW8.HP.com/us/en/drivers.html
Lenovo:
http://support.Lenovo.com/en_US/downloads/default.page#
LG:
http://www.LG.com/us/support/software-manuals
Samsung:
http://www.Samsung.com/us/support/downloads
Sony Vaio:
http://eSupport.Sony.com/Perl/select-System.pl?Director=driver
Toshiba:
http://support.Toshiba.com/drivers
You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.
See you soon.
-
I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »
What should I do to make it work again?Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010
If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:
Trial license:
http://Office.Microsoft.com/en-us/try/
Full license:
http://support.Microsoft.com/kb/823570
Get the key;
http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520
If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:
http://support.Microsoft.com/kb/2002262
Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs
http://support.Microsoft.com/kb/927921
Error message when you start an Office application after installing a suite Office: "invalid product key".
http://support.Microsoft.com/kb/836178
If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:
Run the patch tool mentioned in the article below to uninstall Office 2010:
http://support.Microsoft.com/kb/290301
Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:
Trial license:
http://Office.Microsoft.com/en-us/try/
See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.
-
I had to restore my computer to factory settings, which means I lost PS Elements 10 I bought a few years ago. I have a serial number, but when I tried to install it I got the message "the game archive file of 10 items is missing.» "You must all parties." Any ideas.
who says good enough.
you need BOTH the exe and 7z files. put them both in the same directory and double-click on the exe file.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | 9,8 | 9 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Please help I need to restore my computer laptop back to settings factory, I don't have a disc or instructions to help me have tried hitting F8 at startup upwards and does not give me the way that I need. Please help it will be much appreciated t
It is an acer aspire 5920
Hello paulharrisonXE,
Press the combination of keys Alt + F10 at startup to start Recovery with your Acer factory settings.
If asked for a password for it, if you have not changed the try Acer recovery password 6 zeros (this is the default password for Acer).
Then follow the prompts.
-
Cannot restore my net book of packard bell back factory settings
Please can someone help me I have restored my net book of packard bell back to factory settings that it kept freezing now the screen is stuck and just said the Installer starts services but nothing is past help
Discussions were merged.
Double not deleted to "inflate" list
If this does not work, I suggest you contact Packard Bell for assistance this is a Netbook with no DVD player.
Download the ISO file.
http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821
Use the product key on the machine:
Using the method of USB in conjunction with the Windows 7 download preceding:
http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html
"How to get and use the Windows 7 USB/DVD Download Tool"
http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html
By using the downloaded ISO file method can require the Activation of phone.
If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup
"How to activate Windows 7 by phone '
http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html
The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.
See you soon.
-
Satellite L350-277 - how to recover to factory settings?
I had a lot of problems with my Satellite L350-277. I had already created a recovery to help drive the Tech that was installed on the laptop guy.
In any case, it is time to reinstall again to the State of the plant. Thoughtless I pulled a drive of my computer Vista laptop satellite (I thought it was the original disc). All goes well until it restarts after you install windows system. On the screen was the warning that the product key was wrong, that's when I noticed the Vista on the screen. So I tracked down to the copy I made, it was not in the channel where I put the original his was among all the garbage I've had in the area (where I put all the waste). He was full of scratches and it does not load.
What I had actually done using the Vista disc has been clear the program on the D drive that reads from Windows 7. I ended up going to the PCWorld Tech guys. They have reinstalled windows 7 for the cost of £50. I didn't mind that I got my laptop working again. What I did not know according to them, was I can't create a recovery disk.
So to my question. Can I get my laptop back with all Toshiba knick knacks, so that its possible to create a restore disk. If not, can I get a Windows 7 disc installation program, download all drivers & create a restore disk in case of something that happens and I can reinstall windows 7? Get cramps in my fingers now. I'm not going on a little lol.
Hey Buddy,
That s a little confused is your story...
Normally you get factory settings if you are using the Toshiba recovery disc. It will restore the pre-installed Windows version that came with your laptop.
If you have Windows 7, you can t create a Toshiba Recovery disk. Only possible on what s preinstalled Windows from Toshiba, but if you install your own copy, you can create such a floppy.
If you have the original operating system back, you can order a recovery disc Toshiba here:
https://backupmedia.Toshiba.EU/landing.aspx
Maybe you are looking for
-
My "Task Scheduler" will not display the running tasks since the update to Firefox yesterday.
When I use my task scheduler and select "Display all running tasks", I get "unavailable". The task successfully registered last history was immediately before moving to Firefox 23. What you've done!
-
Satellite Pro A120 - start without LAN monitoring
Just unpacked the first pallet-load A120s and cannot work out how to configure startup options: it takes the machine to boot from LAN first, then HARD drive - without human intervention. It should also prevent starting from what that this is other th
-
HP pavilion slimline s5370t - msg when you start asking for disk that does not exist
After my HP Pavilion Slimline s5370t WIN 7.0 open and ready to go, a message appears saying that I did not insert the disc on the DVD player. The thing of it is that there is no disc inserted, because there is no program, file, etc. that I want to r
-
Hello We have a Catalyst 6509 with IDSM2 and the IDSM2 restart unexpectedly. The error message is: Nov 17 22:32:47: % OIR-SP-3-PWRCYCLE: map in module 9, either bike powered off (Module react don't not to Keep Alive polling stations)Nov 17 22:32:48:
-
Windows cannot find network card until I reboot
Hello I noticed a few threads that are similar to my problem, but I have a recurring problem that is boring and not too disruptive. Everytime I turn on my computer Dell Inspiron desktop for the first time, every day, windows is unable to locate a net