Satellite L350-277 - how to recover to factory settings?

Similar Questions

• Satellite L30 - 10Y - how to reset to factory settings?

  Hello

  I have a Toshiba Satellite L30 - 10Y, I want to back to factory setting, but how can I do this?

  Thank you
  Niall

  Hi prescott91,

  You have the Toshiba Recovery disk? If so, it is very easy: just boot from that disk and follow the instructions on the screen. The recovery disk will delete the whole HARD disk restore factory settings and then recreate the partitions.
  So if you have important data on it, make a backup of it if not already done.

  But it is also described in your user manual. Have a look at. It s interesting documentation. ;)

• Re: Satellite L350-16U - how to recover the password for HARD drive?

  I forgot my massword HARD drive and I can't reboot my system.
  How can I recover my password HARD drive in my notebook L350-16U?

  Thank you

  Hello!

  The HARD drive password can be removed from no one. Sorry this isn't a joke, it's done.

  The only way is to swap the HARD drive, but your data is lost.

  Good bye

• Win 7 restore without disk recovery on Satellite L350-277

  Hi all

  I'm trying to fix Satellite L350-277 of my sister-in-law following a HARD drive failing. Before the crash, he was running Win7 Home Premium (32 bit) that was preinstalled on the HARD drive. I managed to run Belarc on it before it went completely, but could not create the restore disc in time.

  Disk failure HARD seems to be due to bad sectors and once failed, could not get past startup repair. While they were inspecting HARD drive (in the USB enclosure), both C: and D: (backup partition) appeared to be intact, so guessed was discussed with MBR. I have used Clonezilla to clone new HARD drive and I'm now work - failure of HARD drive it's always like it was incase I need to clone again.

  With the HARD drive clone, I first tried to use bootrec.exe but some successful how to 'break' C: and could not see anything in the score.

  BTW I am currently using a copy of DVD retail Win 7 to provide the functions of "restore". However the Toshiba restore capabilities do not appear in the list of options. So I decided then to install everything on C: retail copy to see if I could access toshiba restore functions using data in D:, that doesn't seem to work either.

  Then I stumbled on this thread that gave me the hope to be able to start the Toshiba recory tool:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44382

  I was hoping that Vista and Win7 preinstalls would be very similar, but the HARD drive has a recovery partition (D:\ HDDRecovery) and seems to fall in step 13. There are two files boot.wim in this partition: 'D:\hddrecovery\oddfiles\sources\boot.wim' and 'D:\hddrecovery\oddfiles\hddprep\sources\boot.wim '. Imaging either of these files does not cause the file according to the instructions of step 13. Here again, the guide is based around the Vista installation...

  So what I try to do is to retrieve the data from the old HARD drive with the damaged boot record in order to restore the Win 7 OS pre-installed Toshiba. I seem to have the data (old HDD still retains files) do not seem to have enough knowledge now do!

  Can someone help me?

  On the one hand I can understand your wish to install the recovery image, but on the other hand, for me personally, this is nothing but waste your time for nothing. In General, recovery image is designed may not be copied or manipulated so this guy was very lucky.

  Problem is that this recovery disk is not created after the purchase of the laptop.

  Maybe it sounds stupid to you, but I recommend you restore disk original order for this machine.
  You can order it on https://backupmedia.toshiba.eu/landing.aspx
  It costs 30 Euro only. With this money, you will get original recovery disk that includes the operating system active, all necessary drivers, tools, utilities and a few additional and useful applications.

  Using this disk, you will be able to have perfectly working machine in just 2 hours.

  One more thing: the use of the disc is unlimited and you can use it 1000 times and each time you have enabled and configured perfectly BONE.

• Satellite A500 - how to restore the factory settings after upgrading to Windows 7?

  Hello

  Since I have updated my OS to Windows 7, I have a few problems. In general, I noticed my laptop would ' t work as well as it was running Vista 32 bit. Especially with games online (souch as counter strike 1.6).

  The problem is that I have for my backup DVD because my DVD burner work not at all :/ Now I just wonder how could I return for win Vista without the DVD. Is it still possible? I also do not have small jets CD I bought my laptop. So, what should I do?

  null

  Hi stab them.

  I think that I n the new good t for you: restore factory settings without Toshiba recovery disc isn t possible in your case! :(

  First of all I think it's normal to s no recovery disk is delivered with the laptop as you will need to create them yourself using the Toshiba recovery disc creator. That is why it s recommended using high quality as Verbatim DVD-R media.

  I think that the only option to recover to factory settings is to order a new Toshiba recovery disc.
  https://backupmedia.Toshiba.EU/landing.aspx

  I put t understand why you didn't create this disk, because after the first boot, if you shut down the computer area, you get the following message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• How to restore the factory settings on NB520?

  Hello

  Can someone tell me how to restore the factory settings on a NB520?

  Sale on and you want to wipe everything and restore to original for purtchaser.

  How this is described in the document s user manuals.
  Start your NB and press F8. Choose repair my computer and just follow the menu on the screen.

• Satellite A300 - can't go back to factory settings

  I've denied privileges for users not identified in my PC, so I can't fix it or do anything.
  If I go back to the factory settings, this permission denied disappears?

  Hello!

  How do you restore factory settings?

  Normally, you can restore the factory using Toshiba Recovery disk settings. You must boot from it and follow the instructions on the screen everything that s!
  After that, get back you to factory settings.

  The Toshiba Recovery disk still works, indifferent, what Windows (settings) you.

  Good bye

• Satellite C660-1LD: how to recover and return to the factory settings

  Hi guys,.

  I suffer with any problem on any website a few linked words and when I click on it, an ad. opening of site Web which is a little virus I think and the laptop runs very slowly

  I decided to restart the laptop of the t and return to the factory settings.

  Could you please help me how to restart I'm not really good with computers so if you explain step by step it would be fantastic.

  Thank you

  Hello

  Read the discussions here in the forum of Toshiba product recovery.
  In addition, check this documentation how to use HARD drive recovery:

  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• Satellite L300-110 - how to recover without losing any data on the HARD drive?

  Hi all
  I have a Toshiba Satellite L300-110

  The question is how can I recover my laptop with the recovery DVD without losing all the data located in the hard drive?

  I confirm the information published by Luke.
  The HARD drive and all other partitions should be formatted using the recovery disk.
  Why? The recovery disc sets the laptop to factory settings and to this end, the HARD drive must be formatted first.

  That is why it s is strongly recommended to back up the data if you want to use the recovery disk.

  See you soon

• Satellite A300 - how to reset to factory settings?

  Hello everyone,

  first of all, sorry for my English, it is not my native language and I do a lot of mistakes, I hope you can understand me correctly.

  My problem is that I have a toshiba Satellite A300 provided with Windows Vista op time after I have bought I installed windows 7 on it (you know, so new that I have to try). Now, my problem is I want to reset my phone. I have the recovery disks, and the folder HDDRecovery D: but my computer cannot read.

  What can I do? I tried a lot of things... How can I reboot my computer to factory settings?

  Hope you can help me,

  Best regards.

  Hi biguri,.

  After the installation of another operating system, you will need to use the Toshiba Recovery disk to restore to factory settings. That means Vista preloaded with all the drivers and tools you get back if you boot from the recovery disc and follow the on-screen instructions.

  But don't forget to make a backup of the important files like photos, videos, etc., because the recovery disk will wipe the entire HARD disk.

  You have problems with the recovery disk?

• Satellite L650 - operating system does not start - how to set to factory settings?

  Hello folks,

  Basically, my toshiba L650 is dead.
  He returns with a message as windows was able to start etc then takes me a blue screen when, after abouf 10 minutes another box called Startup Repair so even after I left the night did nothing at all.

  I have all my stuff importantish backed up if someone can tell me in simple terms how can I system restore factory settings very appreciated pwease, your jr

  Hello

  Have you created a Toshiba Recovery disk in the past?
  If this is not the case, try the procedure for recovery of HARD drive as described here:

  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If HARD drive recovery is not possible, then you will need to order a recovery disc.

  Check this box:
  http://backupmedia.Toshiba.EU/landing.aspx

  Good luck!

• Satellite Pro P200-1JV - how to reset to factory settings?

  Hello

  I'm trying to reset my Satellite Pro P200-1JV to factory settings. I tried pressing reset and turn on, also tried pressing F8 and turn on and no system recovery doesn't happen as I was told that it should.

  I put everything in place of discs with it and it's a Vista operating system.

  Help, please!

  Thank you!

  Al

  Hi alanmanley,

  Why you press the zero key to restore factory settings?
  You can restore the factory settings if you go into the advanced Windows (F8) boot menu and select Repair my computer. Then will begin the recovery of HARD drive and reinstall Windows.

  In addition, this option is available on OS preinstalled Toshiba and the recovery disc, that you create yourself as mentioned in the user manual.

  Last but not least check this article:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Satellite L350-277 - can I install driver touchpad of another model?

  I just changed from a Satellite M70 and the touchpad performance is far superior. Is it possible to install the driver for the touchpad on the L350 M70? Anyone see any problem?

  The Satellite L350 pilot leaves the pointer jumps all over the screen. Before say you 'change settings' - I - for about an hour.
  The Satellite M70 driver has much more stability and more features - like every corner can have a function - copy / paste for example.

  Every technophobe in the Toshiba got ideas, before I screw to the top of the main interface on my new L350.

  Hello

  I can t imagine that jumping is caused due to the driver. Make sure that you do not touch the touchpad if you type something. Alternative, you can disable the touchpad due in writing if you press FN + F9.
  Check this box!

  And before you install a driver from another laptop you need to test the latest driver for your laptop. Please first check from Toshiba Web site for an update of the L350 driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  By the way: what OS is installed at present? Do you use a preinstalled OS from Toshiba?

• Satellite L300 - how do I restore factory settings?

  Hi all

  I bought laptop Toshiba L300-19F with Windows Vista.

  I did not the backup CD for reinstallation of the operating system

  Can someone tell me how Ii reinstall my OS even when I bought it?

  Thanks in advance

  Salim

  Did you check the manual of your laptop?
  You will find all the information about to reinstall your laptop or you get back to factory settings. Also you can find here a large number of discussions on this subject so you should only use the search function.

  But if you have Vista on your laptop computer you can restore the factory settings if you use HARD drive recovery or you create the recovery disk. For HARD drive recovery works you should only go into the advanced boot menu by pressing F8, select Repair my computer and follow the instructions on the screen.
  With drive recovery it s similar: just boot from the floppy disk and follow the instructions on the screen.

  In addition, you should this information since the recall of recovery:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite L350 - 20G - how to connect it to the TV?

  Hello

  I bought a Satellite L350 - 20G on Tuesday and just have a question, it will probably be the first of many! I was wondering if anyone knows if you can connect to this laptop to a TV via a cable? If so should which cable I buy?

  Thank you

  JEM

  Hello!

  I think that it of very easy to connect your laptop to an external monitor or TV. If he doesn t have an HDMI port, you must use the laptop VGA port. Therefore, you need a VGA cable and, in addition, a VGA adapter RCA if your TV isn't equipped with VGA port.

  If you are looking for on eBay or online shops for VGA or VGA to RCA cable, you should find enough results! ;)

  And in your user manual, you can also find information on the use of the external monitors. You can switch with FN + F5 the monitor then.

  Good bye