My Satellite P20 is not on the current
Hello!
Well, I had another problem of management power to you guys.
So far I have deal with overheating and abrupt shut down of the computer that was tied to it and clean the heat sinks fixed - it is ok now.
On the other hand - management/battery charge always bothers me now and then... .and now, it is "then" to my penalty.
It seems obvious that Toshiba knows about this problem and so I would really like to get answers to 'them '!
I just lost a job due to the fact that my computer has stopped in charge, empty the battery, then press stop without a warning when the battery was empty (without a sound warning and I on 25%)
I removed the battery and tried to start the computer, but it will not activate... .so I have to plug in/plug out the power cord several times until I get a charge light... .and then it powers up*@*!
The strange thing is that, for the 3 last months or if she was very well (before that I had more or less the same problem), but after moving from my laptop in the House, it did it again!
Any Toshiba brain read this?... causes I know I'm not the only one - common and show our free s and tell us why this is happening, please!
It is not used much for a powerless computer, you know!
Greetz,
INGI
Hi Ingi
Sorry, but I don t agree with you. I use Satellite P20-303 almost three years and it works like the first day. Expanded memory up and cleaned the vents for a short period. It runs very quiet and pleasant. I love this device.
Because of this, you can't write about a common problem on this unit. It is always possible that some users have a similar problem but that don t mean any notebook series has a serious breach.
Second thing is that this forum is just the forum users and if you want the response from their partner service contact in your country, explaining the situation and I hope that they should be able to help you. I'm not a technician but I think there is a problem of electronic power and because of that, you have different questions (battery does not charge properly).
I recommend you to speak with the authorized service partner. Call them and ask what can be the problem.
Good bye
Tags: Toshiba
Similar Questions
-
Satellite P20 - is not restart
Satellite P20 does not restart. He says to re-boot of the original startup disk, but I can't afford to lose all the info.
Any help appreciated thanks
Hey colourglo,
To be honest I n don't know what you mean and your description is very short and not intelligible. I think you expect help here from several users, you need to write a description of the exact error of what is happening and not one single sentence.
You can start in safe mode?
You get an error message or BSOD?If the Windows startup doesn t and doesn t safe mode work too you have to reinstall Windows. All that s.
-
Whenever I have to connect on Firefox I get message saying that I am not on the current version, but I am. -Version 30.0 'up-to-date' what's the deal?
What is your homepage in Firefox that it may seem like the old start page for Firefox by Google because it has the message "you are not on the latest version of Firefox. Update today to get the best of the Web! "under the search field.
Google did not maintain this homepage from Firefox 4.0 came out as it was on: House since.
-
URL address box does not display the current page.
With the 4.0.1 update, the URL address box does not display the current page.
All that shows is the text: «Go to web site»
To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".
Is there a way to display the url of the current page?
This problem may be caused by an extension that is not working properly.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
from the opening, does not show the current date, need to manually refresh the page
initially the opening firefox, it does not reflect the current date. I have to refresh the screen to go to the current date.
This has happened
Each time Firefox opened
is past week or two, cause unknown
A possible workaround is to use to remove the navigation, search and download history on Firefox to clear the cache of the browser on the output. That will make Firefox load pages from the server instead of using the version in the cache.
-
Satellite A100 - will not charge the battery
Hello
I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.
I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?
Best regards
pawelgHi pawelg,
I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.
By the way: you can buy a new battery to an authorized service provider. ;)
-
Satellite M70 do not charge the battery
My satellite M71 do not charge the battery, not only when works now, but also when power is off. Do not charge batteries supplied with the adapter plugged.
Hello
I agree with the user above.
This really looks like a malfunction of the battery. I put t know how old laptop is but generally cover the battery for about 1 year.You know that, after the words of 500 of loading and unloading procedures battery automatically loses performance and battery life battery decreases.
It s nothing unusual.But if the battery is new, you must contact the ASP (partner) in your country.
-
Do not observe the current or the failure to update the passwords in keychain
My passwords change faster that the Keychain can keep up with them.
In some cases, I see the passwords in the Keychain for applications in 2013, even if they have been changed several times years ago. But bunch does NOT show the current passwords in many cases.
Is it possible to have the keychain to update the last passwords, or what I have to add them manually every time they need to be changed?
No Keychain update?
What I am doing wrong?
I really didn't ant to spend $$$ for a Manager password if I have to.
But it could be useful now because passwords must be changed so often and are becoming so complex.
I would hope that bunch would be able to stay with her.
Mac OSX 10.10.5
Try running Keychain Access/First aid and reset the original keychain.
The problems of Keychain - see post of khati
-
Is it possible to display the dynamic value in the ToolTip?
I tried:
this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter
but it does not display the current raw value. It displays a previous raw value of the field...
I wrote 'YYYY', but is not displaying on the first mouseEnter event
When I show event mouseEnter for the 2nd time it gives good value.
Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."
I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")
Thank you.
-
"Your host does not support the current settings for comments.
My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest. I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale). I get the following message:
-
Error
-
Connection error: your host does not support the current settings of comments in mode full-screen. Try to reduce the color depth or resolution of your guest and try again.
Impossible to enter full screen mode.
Do you want to retry?
-
Yes No
-
Does perform a work around?
Thank you
Alan
The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.
-
Satellite P20-932 PSP26E - on the motherboard PCI resource conflict
Hello
I have a Toshiba P20 932
REF.: PSP26E-02NH9-GR
with Windows XPIn a first step, that the USB port not working, I reinstalled Windows XP with the drivers from the Internet for Toshiba Satellite P20.
When I start now the following events occur:1. Press Start button
TOSHIBA screen
Press [F2] for INSTALLATION. Press [F12] to the boot device selection Menu
1.1 if I press F2 - replace the following screen:
? BQ01 BIOS Version V1.10
CPU = Intel (R) Pentium (R) 4 CPU 3.00 GHz
? M 047 system RAM passed
? 12K Cache SRAM passed
System BIOS with a shadow
Video BIOS with a shadow
Fixed disk 0:...
ATAPI CD-ROM:...
Initialized the mouse
ERROR
Conflict of resources - Bus USB PCI controllers on the motherboard
Bus: 02, device: 00, function: 00Press [F2] for installation
1.1.1. If I press F2 - nothing happens
1.2. If I press F12: nothing happens
2. If I press ESC and start the computer, it changes immediately on the screen 2nd with counting / checking of the system's RAM and Cache SRAM... with the same error. and nothing happens if I press F1 to resume or F2 for Setup.
Then my laptop is not booting and I do not get access to the BIOS! What can I do?
Dieter cordially
Hello
The error indicates that certain devices that are directly connected to the mobo are in conflict and try to share the same resources. This happens usually when the BIOS has been incorrectly installed or the motherboard is a failure.
In case you would recommend I affecting the default BIOS. But for that you need access to the BIOS, but it seems that it's not possible.
It seems to be a motherboard problem. You said that the USB ports do not work. Perhaps this is the reason for the error message and question PCI Serial Bus Controller.
You have USB devices connected to the laptop?
If so, just unplug the laptop and check again.But what to say; If this does not help, I see a lot of options here. In my opinion the mobo must be replaced if it s really a motherboard problem
-
Satellite P20-932 stops because the temperature is too high
When I use my Satellite P20 932 for about 30 min, temperature will rise very quickly! The laptop is automatic turning-off, without any error message.
I try to clean the fan at the bottom of the laptop.I'm really desperate.
Please help me!
It of a just in case of overheating.
The laptop stops automatically to prevent the laptop from damage. It seems that the temperature has risen to the critical level.I guess that the laptop is a little older and cooling modules and fans inside the laptop can not operate properly because of the dust and debris.
The cleaning of the cooling modules is a great idea, but you must be careful.
If you have no experience, ask a technician for professional cleaning.Additional you should be sure that there is enough free space around the laptop. It is important for the movement of air correctly.
-
Satellite P20 does not start - BIOS are not displayed
I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.
Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.
Thank you
Hello
Maybe you have a problem with your battery from the Machine.
Please make a new start without the battery.Go that wasn't you maybe has a possibility with a display of extern.
I hope this is a help.
By
-
My Satellite phone does not recognize the external hard drive
I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:
"G / is not accessible.
Access is denied. "I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.
can someone help me? ... Thank you
Can you please tell us which model of laptop you have exactly?
Do you use an original preinstalled operating system?
Are you using USB ports?
Have you noticed the same problem using all available ports? -
Satellite A10: Could not find the card wireless on my system
Hello
I have a series of Satellite A10 on which I can not find the wireless card even if it is built in.
I tried to install it, but windows is unable to read the driver information in the .inf on th cd file.Hello
Is the laptop comes with the wireless network card or that you have built into single? Can you please explain the situation in more detail.
The laptop comes pre-installed with recovery media?
If I remember well with WLAN driver is also a txt file called README. It is step by step explains how to install the driver.
Good bye
Maybe you are looking for
-
Latest version of iTunes does not load file .mp4 as he used to
I've just updated to iTunes version 12.4.0.119 running El Capitan, 10.11.5. iTunes does not see my .mp4 files located under the directory «Vidéos» How iTunes to see my .mp4 the way he used to in the previous version?
-
Where can I find my purchase history in the ios app store?
Where can I find my purchase history in the ios app store? I use air ipad 2 and I bought some elements of support in an online game, but it is not my purchased item? She already deduct under my belt.
-
Updates for Office 2007 keep download
* Title *.Windows update downloads the updates for office 2007 which I did not. I have students and teachers 2007. I know that I don't have to install them. How can I prevent download in the first place but get the downloads I need?
-
This cluster resembles a cluster of error, but it is not
Created a new cluster containing a boolean success/failure, an integer as the 'leaders' and a short chain of calibration. Recorded in a typedef would cluster, it fell on my block diagram and it shows up as the cluster of mustard color error! Anyway
-
contact a live person about hotmail
How can I talk to a live person about hotmail?