My shortcuts Office will not work. How can I activate them? I think that their task was finished accidentally
I think I accidentally finished the task that allows to open my desktop icons. How to reactivate this task?
Hi Joni,
Try rebooting to see if that solves the problem.
Otherwise, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations. Once done, do the same for LNK entry. That should restore your programs and your get your operation icons.
If this does not work, do a system restore to just before the problem started. Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re-install any software and updates that you have installed and uninstall any software that you have removed between now and the point of restoration, but you can use Windows Update for updates.
I hope this helps.
Good luck!
Tags: Windows
Similar Questions
-
Original title: winhttp.dll does not work how can I down load it
I have win xp winhttp dll I can't use adobe or yahoo.
Once more, the response from the Support Engineer with a link to an article that does not help is marked as 'response' by a moderator of the Forum after 6 days of inactivity when it isn't the answer to everything.
It's a real shame the way things work around here. If I were Microsoft and "indulged" these technical support engineers who regularly publish responses that are unnecessary and they are marked as 'response', I think that I would call off the coast of the commitment. "
Usually, it's just not worth reading these Support Engineer 'Answers' as they are not even close. They are usually just wild goose hunting.
WinHTTP.dll if missing some things just will not start:
BITS service (Background Intelligent Transfer Service)
Automatic update serviceIn the Event Viewer system log, you will see tings like this:
Service
Cannot start Service on Local computer Background Intelligent Transfer.
Error: 126: the specified module could not be found
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7023
Description:
The Background Intelligent Transfer Service is completed with the following error:
The specified module could not be found.The automatic updates Service hang and displays "Start" in the Services applet:
Event type: error
Event source: Service Control Manager
Event category: no
Description:
Automatic Updates service hung on starting.CS5ServiceManager Adobe Dreamweaver Service Manager (and perhaps other Adobe startup items) not start and displays error message like this:
CS5.5ServiceManager.exe - Unable to locate component
This application has failed to start because WINHTTP.dll was not found. Reinstalling the application may fix this problem.Running sfc/scannow will not replace the winhttp.dll file missing. I know because I tried.
I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):
c:\Windows\System32
c:\Windows\System32\dllcache (this is where XP keeps backups of important files).Here is the link to my SkyDrive and you can get the file you need here:
http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called winhttp when the name of the file should really be called winhttp.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
You then put the downloaded files in the correct folders on your system.
-
black screen and nice white cursor and Ctrl alt del will not work, I can not update shell
black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?
Hello
Your question I know that some of these methods is not available now, however, all
Convenience store is included just in case where win you some access as you try to solve the problem.You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem
You have a version of Tally that had no support of the years. If you want to continue with the Tally, you will need to upgrade to the latest version...
This seems to be the official site... http://www.tallysolutionss.com/
It may be more friendly... http://tallyworld.com/
-
I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem
Hello
Thanks for posting in the Microsoft community!
I'm sorry to hear that tally 7.2 does not work with Windows 8. I hope that the steps helps you to solve the problem.
Before troubleshooting, provide us with information.1. what happens when you try to use tally 7.2?
2. you receive an error message?
3 is the issue limited to match 7.2?
You can check if the software is compatible with Windows 8.
Make the programs more compatible with this version of Windows
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-usIf this is not the case, try to run the program in compatibility mode.
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-WindowsCheck the event viewer for error logs.
a. move the mouse to the bottom left of the screen and right click to see a list of options
b. Select Event Viewer
c. click an event log in the left pane
d. double-click an event to view the details of the event. Events are classified as error, warning, or information, depending on the severity of the event.
Let us know if the suggestion provided was useful. If you have additional questions, we will be happy to help you.
-
I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much
Download through the page linked below and use the serial number, you need to activate it.
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
-
On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox.
Firefox cannot renew its tabs and now won't run and let me do a backupThis may be considered to be solve my problem.
I decided to uninstall the rogue program Firefox download and reinstall the same version (No. 8). I used Windows XP Add Remove programs who asked if I wanted to save the settings of Firefox until I uninstalled Firefox. I said yes and operated with the uninstall. I couldn't find a Firefox 8 so I went for the 12 version and installed on the laptop. This version 12 now works with all the passwords one favorite of the uninstalled 8.
Thank you for all your help and advice. -
i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again
Hello
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
Hoi
Adobe Creative Cloud is full of photos would like to delete, but this does not work, how can I do?
Thanks Wim
Move this thread for: Adobe Creative Cloud
-
my serial code does not work how can I make it work
my serial code does not work how can I make it work thank you
Hello
If you have a creative cloud subscription then you do not require a serial number to activate it, all you need to do is sign with your ID (Email used at purchase) Adobe in creative application Cloud to activate your membership. See,
Connect and disconnect activate Cloud Creative applications
Solve common problems of activation and deactivation of creative cloud.
Activation and deactivation of troubleshooting
Find solutions to activation errors that may occur during the launch of Adobe applications.
I checked with your Adobe Id on the forums that there is no active subscriptions to this topic.
If you have any other Adobe id try please activate the products with that.
Kind regards
Bani
-
I accidentally deleted my notes. I can see them in deleted notes. How can I move them back?
Go to recently deleted > drag right on the note, and then click on move > then click on which you want to move too.
-
In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?
Hello
Method 1: Make sure that the following services are enabled on the computer.
(a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:
-TCP/IP NetBIOS Helper service
-DNS Client
-Function Discovery Resource Publication
-SSDP Discovery
-UPnP device host
To start the service and set it to automatic, follow these steps:
(b) right click on each of the services listed above and click Properties.
(c) click the general tab, and then, next to startup type, select automatic.
(d) click on apply and then click Start.
Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link:
-
I have a document that keeps returning, "trust settings are not activated.» How can I activate them please?
Hello
Please check the following thread.
Let me know if it helps.
Thank you
Abhishek
-
The effects of top 3 (flame, frame photo and tree) are grayed out in photoshop CC2015. How can I activate them?
Well, I have a full card on my Mac, I do not have access to the 3D features, so I mounted make flame, frame and tree on my Windows 7 Dell.
First created a new empty file, then 3D > new mesh layer > 3D postcard workspace if requested.
Then I went to the filter > make > Frame and try the command again. Frame, fire and trees is active and is more gray.
Then on the Dell, I went into Photoshop preferences > sync and transferred all settings. (you can install Photoshop on both machines)
On my Mac, I went into Preferences > settings sync and uploaded everything and rendering filters have been activated on the Mac and they work well.
The point is that you should be able to activate the filters of rendering on your Mac. Otherwise install Photoshop CC 2015 2015 on a second computer, activate the filters it and sync the two as explained above.
-
Zbook Studio G3: Polishing of shortcut keys will not work
Dear Experts,
I bought the week last Zbook studio G3 and found that brighteness and switches are the image of the screen between the display shortcut keys do not work. before operating system is win 7 and now already updated to win10. I don't know if something is wrong with the driver etc...
look forward to hearing from you soon :))
Kind regards
Jason
Hello
First of all, try to download and reinstall the driver package Intel gpu on the following link.
When reinstalling, restart the laptop.
If the above does not correct the problem, try to download and reinstall the HotKey driver on the link below.
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_173720_1
Kind regards
DP - K
Maybe you are looking for
-
Firefox does not open and not get Profile Manager.
I'm running Windows 7 Professional. So about two weeks ago, I had suddenly couldn't open Firefox and since then have tried to solve it myself does not. the process of Firefox opens in the Task Manager, however, the browser window does not appear. Try
-
Screen goes black when picking up the phone
It doesn't happen all the time, but when I take my laptop in rise or move it all to her, the screen suddenly goes back to sleep / going. I push buttons, but he is not waking up. I have to close and open it, then returns to normal. This behavior is no
-
Black screen appears in green on the Satellite
It is a problem that sometimes occurs before which would be fixed on close down and restart. But now, it seems not extinguish. Most of the black spots and a few other colors appear in green. for example, the black toshiba start screen appears entirel
-
Ring of text 'strings' property update, but no display on the control panel
I manipulate 'strings' of a text property individual ring progmatically. However, changes cannot be seen on my computers remotely display the VI via remote panels and a web browser. The changes are visible on the computer running the VI. Is this a
-
How to convert an audio cd with mp3 music to audio cd to play in my car