my symbols don't work well, but they work very well for my colleague?

Similar Questions

• I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I am running SPSS 23.0

  You can upgrade to 23.0?

  Also, have you looked here

  http://www-933.IBM.com/support/fixcentral/SWG/selectFixes?parent=SPSS & Product = IB m / + Information Management / SPSS + statistical...

• I can longer open attached pdf files. I am able to preview the files, but they are too small for me to read.

  * Original title: attachments

  Help, please.

  I did something wrong (AGAIN!)

  I had no problem with access to attachments to my e-mails, but a problem occurred just.

  I can longer open attached pdf files.  I am able to preview the files, but they are too small for me to read.  When I click to open all the I get now is a kind of icon (in Microsoft Office Picture Manager) with which I can't do anything.

  It seems I should have arranged for Picture Manager automatically opens attachments to emails, but when this happens, I'm stuck as what I try, I can't do pdf files appear as they did.

  The help file does not really help.

  I hope it is something simple, even an old fool like me can do with your expert (and, I hope. friendly) help.

  My fingers are crossed.

  My apologies if I offended Protocol - this is my first venture.regards

  Octogenarian John

  PS My usual guru (aka grandson James) has acquired his first girlfriend, is not so disinclined to waste time me tutoring on the PC

  Create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: (Whatever you have installed a PDF reader).
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• My hard drive crashed, I have lightroom 5, where can I download it again t re install. ADOBE email, I've had has links that don't work more (thanks for that). Running Windows 7 Home Premium

  My hard drive crashed, I have 5 Lightroom, where can I download it again t re install. ADOBE email, I've had has links that don't work more (thanks for that). Running Windows 7 Home Premium

  Hello Andrea,

  have you tried this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML

  Regarding your eMail, you should be talking to Adobe, please take a look here: http://helpx.adobe.com/de/contact.html clicking throug their questions and so "open" Please use the cat, I had the best experiences.

  Hans-Günter

• I noticed that some jpeg (RGB) images are not display in Internet Explorer 11, but they present very well in other browsers. In addition, the images used to display properly in Internet Explorer. No idea what is happening?

  I noticed that some jpeg images are not display in Internet Explorer 11, but they display well in other browsers. I checked they are RGB images, because apparently some people accidentally use the CMYK format. IE is configured to display the images - I checked that also. The images used to display properly in Internet Explorer, and the images have not been changed on the server. The content was created using Dreamweaver CS6 and Photoshop CS6.

  I tried to view the page on other computers running IE, and they also have this problem.

  Any idea of what could be causing this to happen?

  Thanks for looking in this people!

  I discovered that prevented a few images to display in IE 11, while other images show. The culprit was Adblock Plus for Internet Explorer. Once, I disabled the software Adblock Plus missing images showed once again. Interestingly, I discovered that I could cause the same effect in other browsers using Adblock software. There is either a bug in the software of Adblock, or fluid network of Adobe system, which caused some legitimate images should be blocked. Whatever it is, they do not play well together right now. All images are stored on the same domain, and none of them related off site, so it's pretty weird that they have been blocked...

  Anyway, the mystery is solved! I know people like to see a conclusion to these things as much as possible, so I'll mark this as resolved issue.

• Files Management tab does not appear in the import module. I think that I have configured some settings but am unable to change. I restored the factory default preferences, removed and reinstalled on Macbook, but they are always there for example allow du

  I am new to Lightroom and I followed a guide that allowed me to set import preferences. Now I want to change them, and although I see them in the import dialog box small I don't see a "File management" tab at any time. I have reset factory default in the preferences and removed and re-installed on my Macbook, but they are still there.

  Any advice would be much appreciated as I'm looking for guides and forums but did not find any specific help. Thank you.

  Click on apply when importing

  You see file handling

  If so just select

  

  Hope this helps

  Assani

• I need help with my photos, I scan them in my photo gallery, but they import very little anyone can tell me how to solve this problem?

  I don't know much about photo gallery

  I was wondering... What are the dimensions in pixels of the scans? I think it would help if you increase the DPI of your scans to 600 300 or even... look for the custom settings button.

  Also... If the scan bed (large white area) is included in any of your scans... try to get a glimpse and you will have an option to drag a rectangle around the exact part of the photo you want to include in your analysis.

  Find much info on the scanning on the following site:

  A few scanning tips
  http://www.Scantips.com/

• [ADF, JDev 12.1.3] How to display multiple records on the same page... not in a table but they appear a form for each record

  Hallo,

  I need to create a page that displays the records of a VO, but I would not use a table.

  Instead, I would like to display a form for each record to be displayed.

  Forms must appear one above the other and each form should have 2 buttons: one to remove the file/form itself and one to add a new file/form.

  When you press the button Add a new empty form should be dynamically added to the page (so that the user can fill) and created related record.

  When REMOVE button is pressed the form (which contains the operated button) should be disappear and the record shuould be deleted.

  Creations and destruction must be applied only if the user clicks a button on CONFIRMATION / COMMIT.

  Maybe this http://digilander.libero.it/flattit82/OTN_FILES/MultiFormPage.png picture can help to understand what I want to do.

  You kindly help me?

  Thank you

  Federico

  Hi Federico

  I was saying that your page layout can be achieved using af: table

  See this image:

  

  This provision is af:table (I think same as yours), just add a column in the table and put all the fields in this column then correct layout allows to design as a provision on the form or group layouts

  I'm not saying it's the best approach, but you can try this

  Thank you

• Hi I hope someone can help. I find that when I increase the clarity on an image, it becomes very noisy/grainy. I told myself there is a tool to Denoise, but I can't seem to find it on lr5. I watched the tutorials, but they seem to be for lr4

  Hi I hope someone can help. I find that when I increase the clarity on an image, the image becomes very noisy and grainy. I told myself there is a tool to Denoise images but I can't seem to find it on lr5. I saw a couple of tutorials but called lr4 lr5 not. Help!

  Judging by the before and after shots, the original was very underexposed and you he cleared up in LR. Where only a small amount of light enters the camera, these pixels have a weak signal (image) / noise. Subsequent clarification editing software will make the sound a lot more visible, much larger than a dose of clarity. Conversely, lower the tone of an overexposed image will produce an image with less noise because S/N, in camera was higher. For this reason, it is advised to give, if possible, the exposure as much as possible without exceeding the point of clipping to the brightest highlights. In this case, with the sky in the background, you probably might not have increased the exposure of many, but you could bring the sky just before clipping, relying on the capabilities of Lightroom's sophisticated recovery allow to darken the sky during editing, which would have reduced the amount of required clarification for the pilot and the trees.

• I imported two cd on iTunes, they play well, but they have no synchronization with the ipod touch, ideas

  I imported 2 cd on iTunes, where they play ok, but they did not sync for ipod touch, ideas

  -Have you used iTunes import feature? In this way their import converts in a format compatible with the iPod.

  -No other songs still synchronize to the iPod?

• Satellite A100: webcam works does not for windows live messenger on Vista

  I recently lost my picture when working for video calls in windows live messenger, the sound of two ways and I can see them, but no one can see me.
  I also bought an external webcam, and it does not work either.

  When I go to Device Manager it says that the two cams don't work properly.
  I tried to update the drivers but they are up-to-date.
  I wonder if it's a problem of Windows live or Toshiba.
  I use Windows Vista Home Premium and the new version of messenger.

  > I also bought an external webcam and it doesn t work either.
  > When I go to Device Manager it says that the two cams don't work properly

  For me, it looks like a windows system problem.
  Usually two webcams operate independently from each other and so I don t think that it is a webcam driver problem I think that it s windows or windows live messenger problem
  Maybe something confused keys registry or files may be some updates to update or similar

  In your case, I recommend you to uninstall the software of webcam software, internal external webcam and the windows live messenger.
  Then, you must clean the BONES and the registry tool like CCLeaner cleaning, for example. It the free tool.

  After this, reinstall the Chicony webcam software and test functionality without installation of windows live messenger.
  If the webcam will be functions then you could install the windows live messenger again.

• I have a yellow symbol Sun on my strength signal, but any other indicator bars works very well.

  signal strength indicator

  I have a yellow symbol Sun on my strength signal, but any other indicator bars works very well

  I am connected to my network, but still get the symbol as I said everything works fine

  Yes, but you have said that everything was  Come on, one could easily assume you meant everything but a connection to a wireless access point.  Never, you said that you were using a wireless connection, so that would not naturally be taken as part of anything else seen the way you described the problem.  * smile *.
  If it is purely aesthetic, you have two choices...
  (1) leave that would be.  To try to correct the cosmetic would actually damage something.
  (2) get the latest and the greatest drivers and full software for your network hardware manually by visiting the individual web pages for manufacturers and selecting the proper drivers, based on the model and operating system.  Uninstall all network components.  Restart so they reinstall.  Then, install the latest version that you downloaded.  Clear all memory networks and reconnect.  If this fails, consider using SFC/scannow.
  The second may or may not fix the problem.  The first works as it does now.  :-)

• I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it says the Palestinian Authori

  I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it tells me that the page cannot be opened because it was redirected too many times...? Help, please!

  Let me add some details to the choice in the scenarios you have for the use of domains.

  The areas are to simplify all kinds of activities on the Internet for users. Instead of addressing your email to go to the software from e-mail server to a computer with the IP 113.78.59.238 number, users can simply run their mail to "hannah" @ "gmail.com" or go to the website to "gildedgraces.com". This makes things a lot easier for users, but requires a little more difficult techniques backstage, because Internet computers connected and hardware (servers, tablets, phones, refrigerators) have only single numbers, not names. So, how internet needs to know which computer manages all emails for "@gildedgraces.com", and where physically this site 'www.gildedgraces.com '? This is where the "Domain Name Servers" kick in. They maintain long lists of these domain names, with references to the IP numbers correct and up-to-date. In this way, technicians can also easily Exchange computers, servers, connections, where a site is moved to another host, or when a server suddenly collapses. These things will happen, things have to change. They want to update certain IP numbers in the list on the DNS servers. I have it?

  So in order to get a Web site running, you know where your domain registry database is guarded and kept safe, and where your Web site is physically located.

  Note the difference between DNS (or servers) and the service (or Web servers) throughout all the instructions and documentation.

  Now, have a look at this PDF that was returned by Brad, in his response above.

  The domain name can be registered at any domain provider and the registry itself is not always need to reside there. You could relegate (you might say "move" or move) the registry for the DNS to another provider (like BC) service. In such a scenario, he must tell the provider holding the credentials of your registry, to redelegate it in British Colombia. That's what the article 4 in the PDF file. And of course, BC DNS service can internally so all applications for this field to their own web server.

  You can also choose to keep your current domain provider maintains the registry, but that their DNS servers before any request of this area on the web servers of British Colombia, where your site is published. This is typically a necessity for registrations from non-American, since many extensions of national domains (such as .nl and .de) can be recorded by suppliers outside of this nation. So the registry simply cannot be moved to an American company (it's a legal thing). In such a situation, article 6 of the PDF comes into play, describing what BC would normally internally: to the domains of the physical location of the Web site.

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

• 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

  I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

  Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

  Am I missing something here?

  What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

  Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

  Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

  In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

  My $.02