My technical information on my Windows XP STOP: 0x0000007E and rt2500usb.sys.

Similar Questions

• Host process for services Windows has stopped working and was closed.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  How to fix the "host process for windows services stopped working and was closed" on Vista

  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/

  I hope I could help

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• my windows messenger stops working and I got something with uccapi-o. uccapilog. I want now what to do

  my windows messenger stops working and I got something with uccapi-o. uccapilog.i want now what to do.

  Please repost your question windows live solution Center

  http://www.windowslivehelp.com/

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error at startup of Vista: "host process for Windows services stopped working and was closed".

  Original title: problem with Vista

  There is this error message whenever he starts to the top and pop up at any time.

  "Host process for Windows services stopped working and was closed".

  "a problem caused the application to stop working correctly.

  How should I do? and my lower start bar turned white based

  Hello KenricLow,

  Try this to see if you can connect.
  Boot to safe mode.

  To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  Of in safe mode, type msconfig in the start in the start menu search box and press return. Then on the Startup tab, uncheck the box any reference to the verisign/authentec software. Then, go to the services tab, sort the columns by manufacturer, then uncheck all references to Verisign. Then click ok and restart in normal mode.

  If please reply back and let us know if that helped to turn out to get rid of your error message.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Host process for Windows Services stopped working and was closed & Windows must now restart because the DCOM Server process Launcher service terminated unexpectely

  my computer keeps stopping and restarting itself. I get the same messages of 2 error: host process for Windows Services stopped working and was closed and; Windows must now restart because the DCOM Server process Launcher service terminated unexpectely. How can I fix? I used the norton support, run analyses of many, nothing has helped.

  None of the above works though... I didn't know by another forum to download Hitman 3.5 http://www.surfright.nl/en/downloads/home that he got rid of a virus that norton, Norton 360 and Malwarebytes antivirus support could not. I had no problem since :)

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installer of Modules of Windows has stopped working and was closed

  Hello
  I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
  Help?
  Thank you!

  Greetings mollypopsicle,

  I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

  I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

  If you have a download manager, please use it to download the KB958623 update from this Web site

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

  Make sure you use the version of Windows Vista that applies to your system.

  Once the download is complete and before running the update

  1. Restart your system in safe mode with networking, as described in the above post from Brian.
  2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
  3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
  4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

  Here is a link on how to hide the update

  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

  Select only the I'm getting offered an update from Windows that I don't want.

  However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

  Thank you and continue to keep us informed of the State of this update.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• When you try to reinstall Windows XP I get error Stop: 0x0000007E. PCR.sys - base at F7496000, datestamp 3b7d855c F749dobf address

  I first thought that my hard drive went wrong, because it would not allow my to reinstall the Windows XP operating system on the hard drive. I get the blue screen of death. So, I went out and got a new hard drive and tried to install the XP operating system on the new hard drive. I had once more the blue screen of death! So I ask why it does this? I'm stuck!

  Here is the error code information:
  Stop: 0x0000007E (oxc0000005, 0xF749D0BF, 0xF78E9208, 0xF78E8F08)
  PCR.sys - base at F7496000, datestamp 3b7d855c F749dobf address
  Please help me! I have a dell Inspiron 1520, if it's relevant somehow.
  original title: I need help

  OK, then 'search' in the bios.

  make sure that the bios contains specific data on time system, the RAM and the hard drive, IE. :

  Make sure that the date and time is correct.

  Make sure you installed the amount of memory shown in bios the amount real matches.

  Make sure that the new hard drive and its size is denoted accordingly.

  (go to dell.com and look for the model number.  then go over the web pages on it and the faq on the bios and the size of the ram that came standard with the laptop)

• Vista: Windows could not complete the installation. Reinstall Windows. Stops at CRCDISK. SYS in safemode, all the time.

  A hard drive the HP dv2915nr laptop was dead. Installed a new hard drive and use the HP recovery CD. installs for 4 hours and then stops: Windows could not complete installation. Please re - install Windows again. Each facility is 4 hours. Because another install and it took 4 hours and then it restarts and stop at the same error. Now, I'm administrator (locked) - turn off when I pop in the recovery CD. Message: Your account has been disabled. Please, see your system administrator. I tried Safe Mode and loading Windows files stops at crcdisk.sys all the time and then restarts and displays: Windows could not complete installation. Please install again. Can't go in the office. Only restarts with these messages. Asked HP cat (3) Tech people and they do not have the answer. Said, could be a compatibility issue with the software. I ordered this CD of recovery on their part and he got yesterday. Now, they send in the laptop. So tried advice here. Please notify.

  I found the answer. HP Tech Support Chat did not know the answer. When you run HP recovery CD, don't hit the restart WINDOWS button when it asks. The software will do it for you automatically. It will take a while (several hours 1-6 hours) to complete. You'll know it's done when WINDOWS ask you information of language, country and keyboard. In other words, don't touch anything once you start the restore CD program. Leave it alone and it will fix it for you. IGNORE the pop-up restart.

  I can't believe HP has not even tell me that and 3 chat sessions with them was a waste of time. Last HP person ask me to send in the RECOVERY CD and the laptop.

  No help from anyone on this issue. :(

  BUT I thought about it. :)

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• Prosess host for Windows Services stopped working and was closed

  A problem with the application to stop functioning properly.

  Hello

  See the solution here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/host-process-for-Windows-services-stopped-working/365fc5fc-5edf-427d-a4d8-859b74b05b7c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/host-process-for-Windows-services-stopped-working/a2b1b42b-9803-47fb-A120-15358aac5ee3

• "Audio Windows has stopped working" and "host process for windows services stopped working.

  Hello. I recently had to reinstall windows vista on my computer. Everything works well except that I continue to have problems with the audio. When I play youtube videos or to make Skype calls, that the sound disappears and I get the message "Windows Audio has stopped working" immediately followed by the message "host process for windows services stopped working." I remember having this problem in the past, every time that I had to restore the operating system, but I don't remember what I did to remedy. I went to the history of my problem and it's certainly a problem with Windows Audio. What can I do?

  Hello

  1. The problem only affects Skype and Youtube videos?
  2. The sound works fine on the computer in other circumstances?
  3. You reinstall the audio drivers after reinstalling Windows?

  Try the methods provided and see if it helps to solve the problem.

  Method 1:
  Check out the link and follow the steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  Method 2:
  You can also visit this link and follow the steps in the article.
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password

  Original title: Hello,.

  my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this.  My system is Vista Home. Thank you.

  Hello Ewazn,

  ·         You get this error message only when you launch Microsoft Office applications or launch any application?

  You can view the article in the Microsoft Knowledge Base and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Please elaborate on the question so that we can help you in a better way.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.