My Tecra 8000 can run XP Home?

Similar Questions

• After the new OS installation my Tecra 8000 runs very slowly

  I did a format and install windows Windows XP sp2 home edition on my Tecra 8000. Now, it is very slow to load the desktop. I missed the relocation of something?
  I don't have the right Windows XP Home edition, System Restore disc.

  Hello wkerns

  It is well known that some laptops and thus determine a drastic loss of performance after installing XP SP 2. Also, check out this http://www.dvhardware.net/article3135.html article.

  I have the same situation with my Satellite P10. Unit need 20 seconds more until I'm able to use the operating system. I put t really know what can be done to make it better. I read that the processor driver should be exchanged with the processor drivers used prior to SP2. I try still didn t.

• I can't get the update Itunes 10.5 on my PC running windows home edition 2002 SP3

  I can't get the update Itunes 10.5 on my PC running windows home edition 2002 SP3.

  Error there is a problem with this windows package install,.
  a program run as part of the Setup did not finish as expected, contact your provider support or packaging.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Apple.com/kb/ht1926

  Check if that helps.

• I am running vista home basic, how you can increase the size of the D: Recovery drive

  I am running vista home basic, how you can increase the size of the D: Recovery drive

  Hello

  You use the D: Partition of recovery in 3 different ways to reinstall the operating system.

  1. you press a particular key or key combination at startup, F10, F11, Alt + F10 etc. to begin the process of recovery in new condition (as you bought) in the event of system failure.

  2. start > programs > find software from the manufacturer of your computer > look for a recovery method

  3. you can do recovery disk to reinstall the operating system in case of hard drive failure.

  This will save you the purchase of the computer manufacturer's recovery disks.

  The manufacturer will advise you on the options

  See you soon.

• Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print my email address

  original title: Debbie

  I have a Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print from my email address. The error I get is as follows:

  An error has occurred in the script on this page.

  Line: 2107

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  Please help me.  I called Canon nothing is done.

  In fact, I already did what you said but it doesn't work. There is a conflict between windows explorer 9 and my canon mp640 printer. Microsoft consumer support figured this out for me.  What we have done is to uninstall internet explorer 9 and returned to internet explorer 8 and since that my printer works fine.

• Can I Exchange BONES? I have a laptop running Windows 7 and desktop running Vista Home Prem Home Prem I have the OS disc.

  Hi, can I Exchange OS? I have a Dell laptop under Windows 7 Home Prem and a desktop Dell running Vista Home Prem. I have the OEM operating system disc. What I would do is put Vista on the computer laptop and Windows 7 on the desktop. The office is very capable of running Windows 7 BTW. Thank you

  Hello

  N °

  You can not do

  Dell machines come with preinstalled operating systems

  the operating systems pre-installed are OEM licenses

  OEM licenses are tied to original material, they are installed on this machine life

  When the machine dies dies of windows with her license

• How I can run GWBASIC when running Windows 7 Home Premium?

  How I can run GWBASIC when running Windows 7 Home Premium?

  Depends on what makes your source GWBASIC program, you could possibility to use the new direct version of the base system:

  http://SmallBasic.com/

• I lost my BIOS password, how can I recover or change the password. I am running vista Home premium 64-bit

  I lost my password to access the bios and set up the screen. How to retrieve or change the password. I am running vista Home premium 64-bit.

  original title: I lost my password

  I lost my password to access the bios and set up the screen. How to retrieve or change the password. I am running vista Home premium 64-bit.

  Buna,

  We are forbidden to help you with the lost BIOS passwords. Contact the manufacturer.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  About questions about hardware BIOS password reset, we ask that you direct customers to the appropriate resources on the sites of manufacturers of equipment for the correct procedure.

  Please help us to ensure the safety of our community.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  The Revedere

• Tecra 8000 BIOS update

  Help... my first visit on this forum looking for a kindly soul to out me of trouble. My wife has a Tecra 8000 (European version) with P2 400 mhz. To start, she "prepares for the BIOS update". I managed to find what seems to me to be good download on this site, the 'traditional' version for computers that do not run on 500 mhz or higher? Only problem is that I know this must be installed through FDD we have with the laptop, but we have no way to open the file on disk. Neither our computers from home or at work have a floppy drive to open and copy the downloaded file. We were wondering if anyone has a copy, or access to a floppy drive to produce a copy and send it to us? We would be more than happy incurred to help us.

  Hello Brian

  Please check this page http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&from=faq_selection&CFID=BIOS&FI D = TRO0000000b07. It is described how you can create the BIOS update disk, and the correct procedure of updating the BIOS for your laptop model.

  It is not complicated. I'm sure you can do it alone.

  Good luck!

• connection between my laptop Tecra 8000 PC

  Hello

  I have a Tecra 8000, is it possible to connect to my PC via a cable or cables to transfer data from laptop to the PC and vice / versa. The laptop runs on windows xp pro, the PC on windows xp home edition.
  concerning

  aga151

  Hey there,

  You can do this via the cable splitter and create a network peer and transferred the files through that.

  See you soon

• Tecra 8000 and broadband connection

  Hi all

  I recently asked to watch Tecra 8000 a friends (PII 233) and give it a bit of an update... Don't know why the most I've ever done, is to add a few small components in my PC at home!

  My question is - is this possible for a connection broadband to be put in place - I looked all over the laptop, but don't find nothing which would suggest it is possible.
  (Also what other improvements should be can) watching us.

  Sorry for the noobness, but any help is greatly appreciated.

  Thank you

  Ben

  Wow this is really an oldie
  Broadband do you mean the LAN port?

  As far as I know that the Tecra 8000 was not equipped with LAN port.
  It s really amazing but it is a fact

  However, if you want to use LAN then I advise you to buy a PCMCIA (Cardbus 32-bit) LAN card that would be allows to connect the Tecra 8000 to LAN.

  See you soon

• Tecra 8000 - need DVD player software

  I have an aging Tecra 8000 running XP Pro. It came with the standard DVD player (SD - C2102) I can not read the DVD. After a brief look at the electronic manual, it seems there is a MPEG2 decoder in there somewhere for DVD playback and it came originally with a program of DVD player who took advantage of this.

  This DVD player is not on the system and just WMP plays the audio and RealPlayer not playing the ball at all.

  Any ideas?

  Hello

  I don't know if DVD software has been bundled with this Tecra8000, but this is not very serious.
  In the internet, you will find many freeware DVD player.
  The new laptops Toshiba come with a preinstalled WinDVD program.
  But you can also use other programs such as PowerDVD.
  Control the internet.

• Tecra 8000, linux & ethernet & pnp

  Hello

  I am trying to install Linux on a Toshiba Tecra 8000. The problem is with a chipset Realtek ethernet PCMCIA card (module: 8139too), which is recognized, but the network is unusable. I always get an error of SIOCSFFLAGS and assigned interruption is 0, which means that it has failed. I have read many times that I have to disable plug-and-play, but there is no choice when I start with a floppy and run the TSETUP. EXE. Y at - it an alternative to this? Do you have any other clues?

  Thanks, Thomas

  Hello

  Perhaps the following site will help you solve the problem.

  Here are 2 official linux Toshiba sites and there are also some tips.

  http://newsletter.toshiba-tro.de/main/index.html

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  PS: You can also enter the BIOS if you press the ESC key immediately after lighting NB!

  Goodbye, Meier

• New Tecra A4 - 170 - slower than my old Tecra 8000

  Hey!

  Since yesterday, I have my NB again at home and so far, I'm happy with it!

  It has a processor M760, with 2 GHz, 100 GB HDD, FSB 533 and such - but it is slower than my old Tecra 8000 with PII and 366 MHz with only 8 GB of HARD drive.
  Y at - it a tip or something I should fix, or is it quite normal when there is now software for nearly 10 GB (nothing special, just the software more pre-installed desktop, antivirus and internet, no games) on this subject?

  Would be happy to help!

  Meike
  :-)

  HI Meike,

  Your new Tecra running the same OS as your old?

  I would be interested to know if slow is during the initial loading of the operating system or if it appears when you actually use the system.

• Tecra 8000: No memory available to connect with area map PC

  I have a Tecra 8000 running Win98 SE and use a card PCMCIA 3Com for my Internet connection. I was troubleshooting my computer on another issue and in the process disabled Cardbus PCMCIA Toshiba ToPIC controllers. After you have enabled these again once I am more able to communicate with the PC card and so unable to connect to the Internet.

  Card troubleshooting agent PC States: "Windows is not able to identify or use the inserted PC card device because there is no available memory area to connect with this device. You need to do an area memory available before this device can be used. Check the CONFIGURATION of your computer. A memory manager that is excluding the regions of superior memory between A000 and FFFF in the SYS file '.

  My Cardbus controllers are defined as follows:
  1 memory range - 0c 000000 - 0C000FFF
  2 memory range - 001000 0c - 0C001FFF

  My PC Card (PCMCIA) properties are as follows:
  Card services shared memory:
  Start 000c 0000
  End 00FFFFFF
  Length 00001000

  While the PC Card Modem is recognized at the Port, it can be communicated with and error message is shown as follows:

  ' Error 666: the modem is not plugged in or is out of service. "Connect a modem to your computer and try again.

  When I run the Diagnostics on the Modem does not respond to the exception of the following:

  "' Open Comm: cannot open port"

  Any help or advice will be appreciated.

  Have you tried to uninstall the Cardbus drivers? Not sure about the location in Win98 (in XP it is in Device Manager), go to "PCMCIA adapters" and uninstall all entries in controller.

  Reboot and Win98 will perform his routine "new hardware found". This is going to re - install drivers and with a bit of luck should solve your problem.