My two 'Favorites' folders have become different. I'm worried and how

Similar Questions

• Q1: Can we have 2 different products Middleware (SOA and forms and reports) in the same field of WLS?

  Q1: Can we have 2 different products Middleware (SOA Suite and forms and reports) both executed in the same Weblogic domain?

  Q2: what about 2 domains different (one for SOA Suite) and one for forms and reports on the same machine (Box) on the same installation of Weblogic?

  I'm looking for official documents that can clarify these issues for the customer.
  Thank you.

  Hello

  Q1: Can we have 2 different products Middleware (SOA Suite and forms & States) both executed in the same Weblogic domain?

  It is not supported because as SOA and forms & States share a common directory called oracle_common that would be

  crushed by the product. This is why we ask you to use two different homes of Middleware for installation and configuration.

  Ex: If you have installed SOA in a field and you have installed forms & reports and then the oracle_common could be crushed by

  Binary forms & reports and so there might be problem with SOA.

  Q2: how about you 2 different (one for SOA Suite) areas and the other for forms & reports on the same machine (Box) on the same installation of Weblogic?

  You can have 2 different domains but not in the same weblogic Installation according to the explanation above.

  Kind regards

  Prakash.

• My Favorites disappeared after I chose Safe Mode, why and how can I get back them?

  For some reason, a dialog box appeared when I tried to open Firefox. It never happened to me before. I had to choose Mode without failure or default. I chose Safe Mode and now all my favorites have disappeared! I don't know how to get out of this mode and none of the ways recommended to restore my bookmarks work. Help! Most of my work contacts were in the bookmarks. I'm sure that there was an update of Firefox within the last few days. I have Windows 7.

  Did you create a new profile?

  You can check if there are multiple profiles.

  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Recovering_a_missing_profile

  See also:

  • http://KB.mozillazine.org/Lost_bookmarks
  • https://support.Mozilla.org/KB/lost+bookmarks

• Is it necessary to have Adobe Reader on my computer and how to get it?

  Usually, we are experiencing some difficulties during the download and view documents online. These documents are available in different formats, IRS, PDF and video files are a few examples. Sometimes we get a message "you must install specific software to display the required document. It's really a critical situation. However, we are grateful to Adobe who introduced a number of programs that can be of great help while dealing with these documents online.

  Although many useful links are available on the Internet about these issues, however, even in this case some of our friends find it difficult to manage these tasks. Therefore, I started this discussion in order to provide useful information on how to open and view these documents. In this discussion, I will try to find the solution to the common problems faced by most of the users. I'll try to get updates from different sources and to share information received with the participants so that everyone can benefit from the knowledge of others. Main features of the different Adobe products will also discuss to make my readers familiar with various Adobe products.

  I also ask my readers to share their insights on the topic.

  Thank you
  

  Adobe Reader software is the standard for the reliable display, print, and annotate PDFs free.

  It is the viewer of PDF files only that can open and interact with all types of PDF content, including forms and multimedia.

  So you can install it if you come across many pdf files in your day-to-day communications / office work.

  You can download it from: http://www.adobe.com/products/reader.html?promoid=DJDXD

• All the icons have become icons of word doc and try to open explorer.exe in Word 2010

  All the icons on my new Compaq Presario desktop PC now resemble a page with the logo of the word. When you click on them, they try to open via explorer.exe as a word 2010 document. Any ideas how to undo this?

  All the icons on my new Compaq Presario desktop PC now resemble a page with the logo of the word. When you click on them, they try to open via explorer.exe as a word 2010 document. Any ideas how to undo this?

  Suggestions:

  1 do a system restore. Choice of date where you did NOT have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2 use this tutorial and rebuild your cache of icons: use Option. Easier.
  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  3. restore the .exe file association:
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Work plans have a different style of grid and the bottom

  Hello

  Something that was annoying me greatly is the style of grid and the bottom of the document (not the actual work plan or the canvas, I mean the application background) in the work plan 'mode '. If you select a predefined based work plan (like the web 1920 x 1080) switches the document to the mode of work plans, it seems. That means that you have a completely different style of the grid (an a terrible, because the lines are much thicker than they should be) and also if you have selected a background color personalized for photoshop, it is more gets respected. See the example below.

  Keeping in mind I use windows. I don't know if that makes a difference here.

  

  What gives? Since I use a grid for most of my work, it makes the work plans unusable for me.

  See you soon,.

  RIHO

  Thanks, Riho, we logged this as a bug.

• Your updates have messed up my Web pages and how they work. I am not happy! I can't restore what I had before, that worked for me. Firefox 4 crashes my Mac. And my web pages refresh more correctly. Please stop breaking things.

  Yesterday, I upgraded to firefox 4 because I had problems with noscript and my version previous freeze my mac book. I don't remember what the previous version was, unfortunately, because I would like to return.

  In the previous version, the links on web pages would open a new tab at the end of the tab chain. It worked very well for me because it allowed me to have a list of things I wanted to read after the tabs that I keep it open all the time.

  Firefox 4 and, it seems, all Firefoxes after only 3.6 open new tab next to the page you. This messes up my organization of the tabs. Sometimes, I find an article I want to read, but can't read it just right then. I want the end of all the tabs not in the middle of the tabs I keep open to the pages, I have followed all the time.

  Is it possible that I can have the open tab as the last tab on the channel rather than next to the tab I'm.

  Other problems, but I don't know if it's a firefox thing or a thing of the Web page.

  Type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.

  Filter = browser.tabs.insertRelatedAfterCurrent

  Double-click the preference to change the false value

• Tried to defrag, it said I didn't have enough memory, whatever that means and how can I solve this problem?

  My computer is running really slow, so I tried to defrag, clean, I got an error of memory.  I'm not able to download updates to some programs that I use for.  I don't know how to solve this problem, I tried a restore of the system to an earlier date, but that no longer works.  Need help.

  Hi Katiebug1,

  1. did you of recent changes on the computer?

  2. When was the last time that the computer was working fine?

  3. do you have security software installed on the computer?

  4. what happens when you try to install updates for some programs? You receive an error message?

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows

  You can also try the steps in the link below for free space on the computer.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Method 2

  If you are unable to run on the computer Disk Defragmenter, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• sent letter drafts in hotmail, went back to send and only the first line of the text was visible, have been if the rest went, and how do I get that back

  typed a letter and drafts in hotmail, whent sent to retrieve to send and only got the first line of text back.

  Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon

  Mick Murphy - Microsoft partner

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If so, how is it possible to install by Inter

  I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If Yes, how is it possible to install via the Internet, like my Macbook Pro doesn't have CD Driver. Thank you very much for your support. Hope.

  Hello

  You can install and activate the perpetual software (purchased) two computers, as long as you don't use it on one at a time.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  Please find the link below to download:-Download Photoshop Lightroom

• I got 3 accounts, two were administrator accounts and a regular user account. Now, I find that both my administrator accounts have become odinary leaving me without any user accounts administrator account. How can I now get an administrator account?

  I don't remember doing anything that could have caused this problem.

  Enable the built-in Administrator account log in, make your changes to user accounts, search for malware to be proactive.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  First try a system restore to when things worked. If this fixes things, very well. If this is not the case, try to start in Safe Mode, because the normally disabled built-in Administrator account can be activated if no other administrative user is available on the system. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the diagnostic menu where you can use your arrow key to select Mode without failure. If the built-in administrator is enabled, you will see an icon for it on the Welcome screen.

  If the above does not work:

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  Remove the installation DVD and reboot the system in normal Mode. You will see an icon for the administrator on the Welcome screen. If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows Vista (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. If this isn't the case, you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third burning like Nero, Roxio or freeImgBurn software to burn the image .iso image file, not in the form of data.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account. After getting things sorted, disable the administrator built-in yet for security reasons * after * creation of a user and administrative per the recommendations below.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  MS - MVP - Elephant Boy computers - don't panic!

• favorite folders no longer work after upgrading 31.5.0

  I have a few files that have different subfolders. These have been created through the filters of gmail. Some of my subfolders marked as Favorites, some are not.

  The new, embarrassing behavior after the update is that umbrella, or superfolders, records appear in the Favorites panel, even if they are not marked as Favorites.

  It's cluttering up my favorites list because some of my favorites are actually sub sub-sub-folders.

  I found a solution. It turns out that there are two ways to view favorite folders. I was in "Favorite folders", but I had to be in "Favorite Folders - View Compact," to things like what I was used to.

• Two versions of iTunes on different partitions?

  I have a MacBook Pro mid-2009 (4 GB of RAM, 2.26 GHz, 160 HD) which is running Mavericks (10.9.5) but I install a 1 TB hard drive.

  If I have two partitions; a Mavericks running (so I can continue to use Aperture) and the second running snow leopard, am I able to run two different versions of iTunes? I prefer v. 10 to 12.3.1 which I am running.

  If I'm able to run two different versions of iTunes, I am able to run them both off the coast of the same library or would I need a library on each partition? My current library is about 250 GB and is not likely to grow much. Obviously I prefer not having to have two libraries of the size.

  If I am able to do all this, advice or suggestions on the best way to do it?

  When you start from a partition or another, it's as if you use another Mac.  Each partition can have a different version of iTunes.

  Each partition will have its own iTunes library.  Also, Apple goes to the "structure" of the iTunes library (to support the new features), so you would not be able to use the library to iTunes latest version with an older version of iTunes.  And if you use a library of iTunes version older with a more recent version if iTunes, iTunes will update the library.  So, you will need to have two different libraries.

  However, the 'library' is not the same as the iTunes Media folder.  You may be able to set each library to access the same folder of iTunes Media (in the pane of the Advanced of the iTunes preferences), by putting the folder iTunes Media to a location that is accessible from both systems.  But it may not work so well in practice, because when you make a change to a library iTunes (such as adding a song), the other iTunes library won't change.  So, even if this new file of the song is in the iTunes Media folder, it will appear in the 'other' iTunes music library (until manually add you it too).

  Subscribe to iTunes game can work ($25 per year) to make things easier

  https://www.Apple.com/iTunes/iTunes-match/

  You launch iTunes game using the system with all of your songs in the iTunes library.  Your songs are "matched" (for the songs that exist in the catalog to iTunes Apple Store) or downloaded songs unpaired.  Your library of music iTunes "iCloud" (including data such as the sides of the song and playlists) becomes available for all your computers, so in each of your two systems Mac iTunes can access the library, which remains to date for changes or the other system.  And if you use an iPhone or an iPad, you can access the same library of music of these devices too.  At the bottom of the information page, it is said

  iTunes game requires iOS 5.0.1 or later on iPhone 3GS or later, iPod touch (3rd generation or later), iPad, or iPad mini, or a Mac or a PC with iTunes 10.5.1 or later. Access to services is limited to 10 devices.

  so it should work with the older version of iTunes that you want to use (as long as it is at least 10.5.1).  You must keep an iTunes library that is linked to your iTunes Media folder full local.  The other iTunes library access to your iTunes library in iCloud.  iTunes game synchronizes your local library with the iCloud library.  Added advantage is that you can replace any song matched with his record of 256 Kbit/s to Apple song (no), if your existing (local) song file is of poorer quality.

• Can DHCP server with two scopes - I have reservations in doubles in the two staves?

  Hi all

  Not really a guru of DHCP, so be nice :)

  Currently, we run a DHCP service from one of our domain controllers (win 2008R2). The domain controller is the segment of a network (10.10.120.0/24), the computers making DHCP requests are on a separate network (10.10.103.0/22). We use our ip-helper routers setting to say the devices on the network, how to reach the DHCP server. This has worked well for years.  I should also point out it is company policy for PCs/servers have a static IP, so for the PC, we create reservations for each PC. Servers are assigned static mmanually.

  The question is now we have overflowed into a new building and put in a black 1 GB fiber that connects the two buildings. The network in the new building is using a different network (10.10.104.0/24) address. Implementation of a 2nd scope on the DHCP server for this address range went well and once the ip-to support additional parameter has been done on the router the PCs in the new building could fine DHCP to the domain controller in the main building. Everything is good.

  The question is now, we are moving PC between the two buildings, I was wondering if it is ok to keep the existing reserves for the PC in one scope and have a duplicate for her in the new scope assign the new IP address. Of course, the PC cannot be in two places at once and the DHCP console doesn't; "t seem to complain about the same MAC address used in two staves, but I don't really know whether it is advisable or not. Basically, our operations staff become a little miffed at having to remove a single scope of reservations and recreate them in the 2nd scope when the PC to move between buildings.

  So the questions is safe / advisable to do it or not?

  Kind regards

  Craig

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/