My usb mouse stopped working

Similar Questions

• Keyboard and USB mouse stops working and kicking in and out.

  Hello

  I'm having a problem with my keyboard and USB mouse. Both at the same time stop working. Also, the mouse freezes every 10 seconds for 1 second (so boring). When the mouse stops working there is still of the red laser that is below normal. I am confused with that. I have all the latest drivers.
  Thanks for the help.

  Sys Specs: Windows 7 pro 64-bit, Intel DP67BG, HyperX 6 GB DDR3-1600 (3x2Go), Intel Core i7 - 2600K 3.4 GHz S1155, WD Caviar Black 1 TB 7200 rpm 3.5, EVGA GeForce GTX 470.

  Hello

  If you have a USB mouse wired and keyboard connected to your computer, and that they do not work properly, please check following things:

  1. Firstly, plug the USB into a different port on your computer. If they still do not work...

  2 try them on another computer! and if the problem is still there, it would be easy for you to just replace. But is not likely to result in the mouse and the keyboard does not at the same time!

  2 and if it's OK with another computer, which would be something wrong with your computer, and it could be from a hardware or software.

  Just see how it is done up to now.

• The IntelliMouse Explorer 3.0 USB mouse stops working (after ding dong)

  It seems that after an update of my optical mouse USB freeze (there's a ding dong) and then stops working and the Red led on the mouse turns off.

  The mouse is a PIN to USB Intellimouse Explorer 3.0 X 06 25120 PID 55249-576-4441001 - 0 - 3901; the operating system is XP.  I downloaded the drivers for the mouse from microsoft site (IPx86 - 1033_8.15.406.0) and re-installed readers. The problem persists.
  I can unplug it, then plug in USB and it will work for a short time, and then it freezes again
  Please advise me on measure to correct

  Hi JimBrowne,

  1 update you tried to install?

  You can check the updates that are installed recently.

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You can try to perform a restore of the system to a restore point before you have been affected by the problem or the update has been installed and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

  For more information, you can also consult the following link:

  Keyboard and mouse stops responding when you upgrade to Windows XP

  Hope this information is useful.

• USB mouse stopped working after system update

  I'm running Windows 8 here and it updates automatic system has run and disabled use my connected USB mouse (manufacturer: Targus | model: AMU4201EUK)

  When I search the drivers in Device Manager tells me I'm using the latest drivers available and can't seem to find a driver for this specific mouse online.

  I use an external keyboard connected via USB and works without problem so I'm lost as to why the mouse would stop working. He able to go to the mouse as the LED inside turns on when it is plugged. Windows made his usual sounds when its connected and disconnected from.

  This happened last week and to work around, I restored windows since the eve of the update and it worked without problem. Windows tries to install the updates again after a few days, then the mouse will become unusable. I've lost the ability to return to this State, now I'm sure that Windows has replaced something in this update.

  The mouse uses of Microsofts HID drivers that are up to date and I confirmed the mouse works on other systems and on my laptop USB ports are functioning normally.

  Any suggestion is appreciated.

  See this similar post semi for some additional options open to you.

  After update, windows 8 pro will not be closed or sleep with connect to internet
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/after-update-Windows-8-Pro-wont-shut-down-or-sleep/24bdbd5a-AEEE-4ADB-B470-7ef5685acb99

  Have you had a look in Device Manager for errors with USB devices?

  Use the Device Manager and uninstall the concentrators root USB and devices which show now on your machine.  Restart and let XP rediscover and see if that solves your problem.

  If you uninstall the mouse in Device Manager, then reboot, Windows should find the mouse and install the appropriate drivers.

  Uninstall or reinstall a device
  http://TechNet.Microsoft.com/en-us/library/cc725782.aspx

• Keyboard and USB mouse stop working correctly with Windows 7 Professional x 64

  I originally had Windows Vista x 64 on my computer (he's 8 months old, CPU intel quad core 2.0 ghz, 6 GB of ram etc.). I installed Windows 7 RC in July (new installation) and used until 2 weeks ago when I installed Windows 7 Professional edition (I reinstalled Vista and then installed the upgrade to Windows 7 by using the clean installation).

  In recent days, I had problems with the mouse and keyboard (the two connected USB). Entries to start acting strangely. For example, using scroll in firefox causes the font sizes change in firefox, instead of scrolling and clicking on links opens the link in a new window, not in the same window. Right click stops running. The keyboard input will simultaneously strange - I can type is no longer (for example in firefox search boxes, or WMP), of if I type, it uses another command to open something, etc. I don't understand what is happening! However, after the reboot, the problem disappears and everything works fine, until the next time it happens (has happened 3 x now). I tried my mouse and keyboard in my old laptop and they both seem to work well. I have not received any pilot error / virus messages / dysfunction (Bitdefender 2010) messages of any kind, and as far as I know, all the drivers are up to date.
  Anyone know what is happening? Is there something wrong with my motherboard? And if so, why are there no error message? And why things work again after the reboot? Help, please!

  Hello

  Update the drivers for the keyboard and mouse should solve the problem.

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Satellite P850 - right USB ports stopped working

  I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change.

  Anyone has any ideas.

  > I tried to uninstall and reinstall, no change.
  What have you tried to uninstall or reinstall?

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• My wireless mouse stop working

  My wireless mouse stop working... any suggestions? I put a new battery in it and it still does not work?

  Hi Glenna,

  Try a classic USB mouse to confirm that this isn't your system programs related to the mouse.

  Try using different USB ports in order to check that it is not a problem with that specific port.

  Try the mouse wireless on another computer to see if she's working.  That should help tell if the problem is with the mouse or with the computer.

  If it came with the software, firmware and drivers, try to reboot to see if that solves the problem.

  If she just started recently, try a system restore to a point in time before that the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.

  If the mouse doesn't work no matter what you try (on any computer), then chances are it is defective and must be replaced.  If it works on other computers, but not on this computer, then further efforts will be necessary to try to track down the problem.  If the above does not resolve the problem, after return with the results of what you have tried and what version of Windows are you using and the manufacturer, brand and model number accurate and complete of the wireless mouse.  Then this thread will probably be moved to where it should be (this is for feeback on the forums, the issues not techniques on mouse problems) and the people in this forum will also offer assistance.

  I hope this helps.

  Good luck!

• USB ports stopped working unexpectedly

  Hi, I am currently on "Toshiba Satellite C655"run"Windows 7 Home Premium". It's a laptop of 2009 model (2 GB). Last night (24/02/14) my USB Ports stopped working, they have been and continue to read anything every time I have to plug my devices. I usually only connect a cooling block and a USB mouse to the computer. They worked perfectly until I disconnected the. When I reconnect them, they work momentarily, and then I hear the beep sounds when you eject a device. I tried to connect several flashdrives, a printer, and one I tried the following hotfixes:

  Note: The order of numbering has nothing to do with the order, I tried to apply each patch unless specified elsewhere. This computer had Windows 7 Home Premium REINSTALLED at some point. Just for your information. This message was made when there are others with the same problem is due to the fact that no solution not specified by Microsoft Technical Support or the Microsoft community were effective.

  1) System Restore to the last known point, where they worked (and still). (Point restoration @ 15/02/24)

  2) Windows Update

  3) turn off the computer, disconnect the battery and the power supply and holding 'On' button for 10seconds.

  (Note: whenever I turn on the computer now they work only for a moment, usually from 60 to 180 seconds.)

  (4) Start > research ' Device Manager '> "De Bus USB controllers" Expand and turn off and restart the computer. They are re - activate automatically but my problem persists.

  (5) download and run "Microsoft FixIt.WinUSB... ", on the 1st, I had a problem with devices not updated. But I actually watch updates by using Windows Update and ""searching for hardware changes "" on USB Bus controllers "." I then did a 'System Restore' and now Microsoft FixIt found no problem but the USB Ports don't always work.

  (6) will ' services.msc"and change the Startup Type of Manual to Automatic for Windows install and restart Windows."

  7) regedit

  8) sfc/scannow

  I am really lost with this problem now. My laptop works and worked perfectly fine until this problem occurred. I have fixed minor problems with computers before, but this is a bad joke for me now. If someone could please help me with this problem I would appreciate it a lot. Thank you very much.

  Thank you for your help, but I discovered something funny on my computer. My cooling package (product name: Laptop Cooling Pad NSB;) HYCF-6181-2 model number) is to disable my USB ports when I plug. If I leave it unplugged and restart my computer, my USB mouse is still working on a port. Also tried using my USB and other devices. The problem is my block of cooling that strangely disables my USB ports, whenever I plug. Thank you very much for your quick response, fortunately the answer might help me in the future. For now, I have solved my problem.

• All USB ports stopped working Windows 7

  Windows 7 Pro. All USB ports stopped working.  When I plug a usb card, windows makes the sound as it connects and the card gets power (light).  I see the map appear in disk drives in Device Manager.  The player does not display in windows Explorer or disk management.  In Device Manager, it has an exclamation point and says that the device cannot start.

  Strangely, I have a USB keyboard and mouse and they work very well.

  It's just the USB drives and chips and SD cards that are not displayed.

  I have:

  Reinstalled the drivers USB MB

  Flashed the BIOS with the latest version

  Tried to install the older USB drivers

  Tried to let windows find the driver.

  Still does not

  None of this has helped.  I ended up formatting the HD and reinstall windows from dvd.

  This revealed that my USB multicard reader was bad.  When I unplugged the problem disappeared.

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• Wireless mouse stop working

  my wireless mouse stop working.

  OT: device

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the mouse?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• Click on the mozilla firefox mouse stop working

  Click on the mozilla firefox mouse stop working

  http://forums.mozillazine.org/