My video/cursor does not start if I call it from a script

Similar Questions

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• After a breakaway of electric failure does not start, or I can boot from the cd that the drivers won't load

  I get the logo and the system beep.  Seems to hang for about 2 minutes then tricking black screen reboot and select proper boot device or insert boot media in selected boot device and press a key.  When I insert the dvd-rom supplied with the pc recovery, it takes about 4 minutes for so-called load windows and off to install windows for me.  No matter what I select, I'm only able to download the drivers that may be defective and then find and I can retry or cancel.  If I try again once I get the same cycle but I can't get into windows, nor can I access any of the disk recovery tools.  I can't enter the Bios or any other file.  I tried power market and stop and start cold without result.  The pc was in hibernation because of non-use, but had been shut down when the crash occurred.  It is on a surge protector.  I could really use some help and appreciate suggestions - I'm a little computer but certainly not a tech guru.   Thanks for any help.

  Hello

  ·         What is the brand and model of the computer?

  ·         What exactly happens when you turn on the computer?

  ·         You get the error message?

  If you are not able to boot in the BIOS there is a problem with the hardware. I suggest you contact the computer hardware manufacturing for this problem.

  Also check out the link below and check if it helps:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• Cisco Nexus 5596 does not start after NX-OS upgraded from 5.1.3.N1.1 to 6.0.2.N2.5 [CSCun66310]

  Hello friends,

  I want just to save your valuable time & effort, while Nexus 5596 upgrades so I wanted to share some useful information that you can have a quick glance before your Cisco Nexus 5596 device updates.

  Recently, I ran into trouble when upgarding 5596 Nexus data center switch does not boot and after investigation of the Cisco TAC it comes out to be Bug described below.

  https://Tools.Cisco.com/bugsearch/bug/CSCun66310/?reffering_site=dumpcr

  My way of upgrading the device was: 5.1 (3) (1) to 6.0 (2) N2 N1 (5).

  As this upgarde involves an upgrade of Bios and power purposes, I had some doubts to get this properly upgraded, but he had more twist involved in this upgrade I got to know after contacting Cisco TAC for my death 5596 Nexus device and got info if you have version impacted in your Nexus 5596 device and you plan to upgrade , then you migh RUN in this serious BUG aftre which device will not come at all and only Option left is to replace with device of RMA.

  Material affected PID versions Versions updated

  UCS-FI-6296UP                                            1.0                                       1.1

  N5K-C5596UP                                              1.0                                        1.1

  N5K-C5596T                                                 1.1                                         1.2

  You can check with hardware version command from your device below.

  5596 # display sprom sup | H/W Inc.

  H/W Version: 1.1

  So please be careful when you plan your Nexus 5596 update and check over things that this Bug is not present anywhere in the docuemntations upgrade unfortunately.

  Hope this will help and save valuable time of a person.

  This bug affected me. Before upgrade you the equipment, to track:

  It's procedure, there will be no allocation to apply.
  Is attached to the case of the dplugin for each NXOS, check out the name associated with each version.
   
   
  Step 1
   
  -------------------------------
  Copy the file dplugin and update, load Plugin
  Copy the ucd - update.tar to the bootflash
  Copy the debug plugin into the bootflash
  Load the image via the load control
   
   
  Note You can access the command line without leaving the plugin to debug via command vsh
   
  Example:
   
  n5K-1 # dir bootflash:. grep debug
  3023275 23 Jan 15:28:48 2013 ucd - update.tar
  283423 23 Jan 15:12:28 2013 nuova-or-dplug - mzg.5.2.1.N1.5.bin
  n5K-1 # load bootflash:nuova - or - dplug - mzg.5.2.1.N1.5.bin
  Loading of plugin version 5.2(3a)
  ###############################################################
  WARNING: debug plugin is for engineering for internal use only!
  For reasons of security, plugin image has been removed.
  ###############################################################
  Debugging properly load-plugin!
  Linux (Debug) #.
   
   
   
  Step 2
   
  -------------------------------
  After you load the dplugin file into NX - OS, please follow the steps to update the module of TI.
   
   
  Copy the ucd - update.tar of bootflash to the tmp directory and unzip the file
   
  Linux (Debug) # cp /bootflash/ucd-update.tar/tmp
   
  Linux (Debug) # cd /tmp/
   
  Linux (Debug) # tar - xvf ucd - update.tar
   
  UCD.bin
   
  Address_91_A.csv
   
  Address_92_A.csv
   
  Linux (Debug) #.
   
  Step 2
   
  ----------------------------------
   
  Run the ucd.bin file:
   
  Linux (Debug) #./ucd.bin
   
   
   
  You will see the prompt on the version 1.1 update.
   
  --------------------------------------------------
   
  principal: correctly upgraded TI inst 2 to version 5.
   
  New SPROM HW version 1.1. Charging must reflect in 'show the sprom' output.
   
  Release Linux (Debug) #.

  The problem is how to get the plugin. Only Cisco can provide this.

• Presario SR5130NX bad video embedded - does not start

  I have a Compaq Presario SR5130NX equipped with a LCD HP vp17 using the onboard video. It is Windows Vista. The PC won't POST. There is no display at all with the exception of a brief message on the LCD indicating no video signal on a port, but there is a code beep BIOS 1 short, 1 long repeated. I can't find the meaning of this combination of beep codes anywhere, but I guess he's trying to say is that I have a video problem. Set apart this, fans turns on and the hard disk rotates. So far, I did the following to solve the problems-

  • Connected the LCD screen to another PC to check if it works.
  • Removed and reinstalled the 2 sticks of RAM DIMMS.
  • Insert a video card into the PCIe x 16 card slot and tried the VGA and DVI cables - no change.
  • Tried to get into the BIOS by F10 key - do not know if it worked because there is no signal display.

  I solved my problem when I realized that, even if I deleted and reinstalled the DIMMS, I neglected to test them individually (duh). One was bad.

• There is a dead zone on 1-2 "below the toolbar where the cursor does not start a process as close the session or sign, etc.

  Below this area, everything works normally.

  Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. If you have either or both, uninstall them / it, or see if an update is available that solves the problem.

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Video - multievent does not start automatically?

  Is it possible to stop a multi-event video to play automatically? I see that I can do that if I add the video as a video event, but I must add CC. I use C7.

  Down the timeline a little video and add a play button to continue. The button should take a break just before the video.

• fixed compound win xp installation does not start

  I used the repair option on my reinstallation disk to repair my OS and now windows does not start, it used to evenstart from disk.

  Hi HowardJ11,

  ·         Did you do the software/hardware changes or windows update on the computer before the show?

  ·         You're able to boot in safe mode

  ·         You get the error message?

  Follow these methods.

  Method 1: Disconnect all external devices and try to start the computer.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

• Vista will not load and continually reboots, recovery disk does not start.

  I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

  I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

  I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

  I also tried out the RAM and it put it back again (a single website suggested I try this).

  Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

  http://support.Dell.com/

  If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
  As you say, you have changed the boot on the appropriate drive order and still nothing

  It would seem that you have a deeper problem that just a straight reinstall the problem.

  See you soon. Mick Murphy - Microsoft partner

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• H8 - 1280t - QC461AV #ABA: desktop HP - computer does not start after the installation (Windows 10) video card

  So, I just bought a new video card an XFX R9-390 and a new HX1200i POWER supply corsair (overkill ik ) that I put on a card mother IPIWB-PB for my 3 years old HP PC, and the new stupid video card is not working. the PC just does not start, I see is a black screen. My monitor is an HP 2311gt and I can't use my computer with the old video card no probs, BUT whenever I have to install the new card does not detect my monitor just and I only see a blank screen. I HAVE NO IDEA HOW I'M DOING. Help, please

  PS. I have RMA the new power supply and the video card and they got to check and send back to me, so I know that the two pieces of equipment are working very well AND of course I am currently using my PC with the old video card

  Wiraqocha, here is the link to start safe for HPs with Win 10 and instructions to enter the BIOS. It may be useful:

  HP PC - secure boot (Windows 10)

• computer does not start after installing video card

  I, m new here so please bear with me.  I have a PC HP Pavilion Media Center TV (m7434n) I'm trying to replace the video card (Nvidia GeForce 6200SE with Turbo Cache) in. I am trying to replace it with a Nvidia EVGA 8400GS. I delete all the nvidia drivers, make sure that the pci-e card is used in the implementation. I have then to remove the old card and install a new one. When I try to start the computer, fans turn on but that's all.  There is nothing on the monitor.  The computer does not start. I replaced the power supply bestec 300 watts with a new antec brand 430 watt power supply.  When I reinstalled the old video card, the computer starts ok. I tried to replace the video card with an ATI Radeon HD5550 too and it's the same thing (the computer would not start), reinstall the old card and it starts up fine. Any help would be greatly appreciated.

  Gary,

  You may have a compatibility issue with the ATI HD 5550 and 2006 PC model.  I've seen other posts where ATI 5xxx video card did not work in older HP PCs.

  When you are referring to the installation of the older video card do you mean going back to the integrated video card?  Moving the video cable to the card installed?

  Install the NVIDIA 8400GS and connect the video cable. Now follow the instructions for clear the CMOS.

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• Cursor does not when the computer starts.

  On my wife laptop when she started his computer cursor does not at all. How she can use the cursor without using the touchpad (because it doesn't seem to work at all)? So how do this slider to work again?

  Thank you for your help.

  Paul

  Hello

  Try the system restore before you did it again at:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ================================================

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  The here for Toshiba only if other brands may have similar:

  If a Toshiba, they have keys that allow easy adjustment of the TouchPad. See Toshiba support and
  Forums. If the TouchPad has been disabled with map keys must be activated with them.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums
  http://laptopforums.Toshiba.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.