My video is blurred when previeiwing and during the rendering of
I recorded my 1280 by 1024 screen and you want to put some audio that I have, but its all blurry, even when I match the sequence settings and export settings. Seen in VLC raw files are crisp and clear. Can someone help me?
I just did a new sequence and slide the clip in, corresponding to parameters. I'm not sure why it has not happened before, but that seems to work
Tags: Premiere
Similar Questions
-
I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
"Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.Do not install an operating system is usually caused by (in order of probability):
1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.
2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.
3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.
4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.
* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .
5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.
* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .
6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!
-
I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported
See the link below:
https://forums.Adobe.com/thread/1836232
The folder Lightroom 6.
Right-click on Setup.exe and choose Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
-
https://www.Google.com/URL?SA=t & source = web & rct = j & ei = Can0VKmmOoSVNpyGhNAN & url = http://m.yout ube.com/watch%3Fv%3D3g_K8RyGUeI & ved = 0CB8QtwIwAQ & usg = AFQjCNFI0ivwTaEa02S1jVj6_z2DEt9t9w I just need the name of this video effect
Put your video clip on the video track 1. Put the SAME element above himself on the video 2 track. Select 2 video clip and go to the EFFECT controls panel and open MOTION. Scale to 50% or what sounds good to you. This creates the PIP or ' Picture in Picture '. Then select (click on) the V1 video and go to the EFFECTS tab and find the (type in the search window) Gaussian blur effect. Apply to the V1. Set "Fuzzy" to taste. The only thing missing at this point is the outline in white for the PIP. I don't think that there is an 'effect' to do this, I could be wrong. But you should be able to use the shape tools in the Titler to pretend quite easily. For example, just do a solid white box slightly larger than the picture. Move the clip V2 to V3 and put the title on V2, sandwiched between two video clips. As the box is larger that the video scaling, white edges would show behind clip PIP.
Hope this helps you
Jeff Pulera
Safe Harbor computers
-
Windows 7 hard drive stolen when idle and during programs execution system
I can hear my hard drive C beating away when my system is idle, and even though my system is running programs.
Think it might be Firefox that uses the hard drive much - checked, uses the hd a little, but not more than usual, but I can still hear the hard drive clicking suite. So I close Firefox. Still ongoing.
Tried to switch browsers Chrome, and even has a lot more use of the disk by cycle Firefox did. But no matter whether Chrome is open or not, I can still hear the beating of hard drive.
Tried to use IE as my main browser, still no luck.
I checked on the Windows Task Manager, but no 1 process shows a lot of the use of the disc. I tried then to resource monitor and 'System' appears at the top of the list of processes sorted by use of the disk. But there are a lot of sub-thingos (forgive my ignorance of jargon) ongoing enforcement under 'System', while originally the beating of disc?
I disabled the process that has been suggested on the forums, without any change in the use of Windows Media network share drive.
Then I saw a thread in which someone talked about disabling Marvell / RAID drivers remains other manufacturers (where the system has no installed RAID array) slow down its use of the disk.
I have no RAID array on my PC either and noticed a Marvell driver under the heading 'System' using SysInternals Process Explorer.
I also noticed that some other drivers stray, maybe one of them is originally the use of disk problem?
It is terribly random - will start and continue for 30 to 40 minutes and then stop for hours, then start again.
I don't think it's a virus, as I have Avast! and can use the shield of file to control what files Avast! analysis - strangely, although I hear the hard drive in use, Avast! does not pick up/scan all files that the disc is supposed to be using.
Here are the various screenshots that I downloaded in the hope that someone can help me solve this problem of disk hard until it wears out and dies a lonely premature death: P - thanks
I downloaded SysInternals Process Monitor of
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx
But the program is much more complex than Process Explorer and I have no idea how to use it.
Can someone tell me please how to run a trace through the events that may help determine which of the processes analyzed in running process monitor is / are the ones that are causing high disk usage?
An analysis more
Restarted in safe mode (without network) and entered the resource (part of Windows 7) monitor and SysInternals Process Explorer (in Microsoft TechNet) to see if I could pinpoint the problem.
All the time, I was in safe mode, the hard drive kept in fly! : O
I started first of all resource monitor and saw that the 'system' with the PID of 4 remained the more intensive process of disk. Using the disc went from 100 KB/s to 1 MB/s as before when you are connected to Windows 7 normally.
I also saw
svschost (netsvcs),
Svchost (secsvcs)
Svchost (dcomlaunch)
and like other processes
wmiadap.exe
wmiprvsv.exe appear. 2 wmi processes disappeared after a short while leaving svchost and remaining 'System '.
I closed the resource monitor shot to the top of Process Explorer and found some weird-looking process:
Under wmiprvsv.exe, there was a file called locale.nls, with no manufacturer name/description (unlike some other services/sys files having a "Microsoft Corporation" as their name)
Under each of the svchost.exe process, out of all the files that have name descriptors (Microsoft Corporation), there was a little without name descriptors that caught my attention:
A file that found in Windows/Globalization/Sorting/Sortdefault.nls
A file called locale.nls (sorry don't remember the location of the file)
A file that found in Windows/Registration/R00000000000.clb
A file that found in Windows/System32/C_28591.nls
All the files above with the exception of the R000000.clb one found in svchost, lsass and csrss.
The R00000.clb file was found only in svchost.
I noticed these files because they had no name description next to them - could all of the files I mentioned contribute to the problem of the use of disc?
Hard drive stolen continues even after I Logout
I have my own PC and use an administrator account (not the default "Administrator" account, but my own account with administrator privileges).
I tried logging my regular account and another account limited, I have on the PC. Not only the disk thrashing hardcontinue while I was connected and on the screen of welcome,but he continued even after I had connected to the limited account.
Weird Hey?
UPDATED OCTOBER 12, 2010
Tried to run performance monitor reports using perfmon /report in start search/run menu. Have not circumvented to André Xperf suggestion again, too complicated for me to understand, waiting for his response.
Meanwhile, here's a screenshot of the 1 report and the complete HTML file of another taken report a few minutes later (did not know that I could save the report in HTML format at the first time, I did the screenie)
Nope,
It was actually the power supply fan making a rattling noise that resembled the disk hard grinding/fly. This problem is solved. Thanks to all, especially to André, for your help.
-
Encounter a js error when minimize and optimize the vClient
During the development of plugin for vClient, sometimes he has to display a dialog box. I used dijit.dialog for development.
However, when the dialog box is exposed, and if I minimize the vClient and enlarge the vClient, there will be a js error that said that the argument is not valid. But if I use a browser instead of vClient, everything is ok.
I have no idea on this problem.
Is there anyone who has encountered the same problem?
What should I do to fix this? Or someone who can give me any suggestions? Thank you very much.
I had the root cause. When minimized vClient, it will trigger an event making dojo to resize the window. Length and width of the window cut is used and the dojo will give an invalid value, which caused the error.
-
I'm not sure when the problem occurred, maybe 2-3 weeks ago and trying to create a restore date system before the 'problem'... the dates do not go far enough?
Hi Kabramble,
· Did you the latest changes on the computer?
Check out the link to the Apple Web site and try the steps mentioned below.
Bugs and Error Messages
http://discussions.Apple.com/thread.jspa?threadID=786774
For further assistance, you can post your request in the forums of Apple.
http://discussions.Apple.com/category.jspa?categoryID=150
You will no more find system restore points if they are not created.
Restore points are saved until the system restore reserves HDD space is filled. As new restore points are created, old ones are deleted. If you disable the Protection System (the feature that creates restore points) on a disk, all restore points are deleted from this drive. When you turn System Protection, new restore points are created.
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
This problem happening since Wednesday, July 25, 2012, webamail notify just stopped to check my Hotmail accounts without reason apparent, it was working fine before this. I appreciate anyone who takes the time to answer this question thanks a lot soon.
Kind regards
Paperwork.
Alternatively, you can try to update WebMail Notifier. Please see the comments: Firefox Tools (Alt + T) > modules, click on the gear in the top icon right > check updates. Otherwise, right click on the WebMail Notifier and find the updates. Forum notify WebMail may also have helpful advice.
-
I am using Windows XP SP3, just before I drag and drop the file into another folder in my windows explore. Suddenly, he is creating shortcuts for moving file. I'm not able to move the file by drag / move the mouse, it is possible that by cutting and Paste(Ctrl+X) using the keyboard. Why?
Maybe your 'Alt' key is stuck.
See exchanging the keyboard with another makes all the difference.HTH,
JW -
During the rendering output queue is disabled
Hey all,.
I'm running the new Adobe CC 2015, just to update everyone on creative cloud. I'm on a Mac 4.0 i7, 32 GB of Ram, dual Titan Z.
In the previous AE (CC, CS6, CS5, etc.), you can watch the spectator play through your animation, as it makes. Now, it freezes right on the newest chassis read before you click render. And no, I don't have Caps Lock.
It of a bug in the matrix or is it now a setting to toggle the viewer while rendering?
Thank you
J.
- Glimpses of the rendering queue
After effects CC 2015 (13.5) does not display a preview of the compositions rendered through the render queue. The new architecture, code to the render queue and previewing compositions has been significantly rewritten, and this feature requires additional work.
Related option in preferences > preview video, video overview for making queue of output, has been disabled.
We plan to implement this new feature in an update after effects CC 2015 (13.5).
-
Sets full resolution during the rendering of the effect
Hi all
I m creating an effect using recognition of area, bounded by certain lines.
My problem is that when I drop the sample resolution, get cutting lines and my region matching algorithm to get a completely different result that we shouldn't.
Is it possible for an effect to force the entry of an image full resolution, regardless of the change of user of downsampling?
I tried the RenderAndCheckoutFrame AEGP function, but when rendered rendering call cause an infinite loop...
I was thinking about a pass two rendering and a parameter or a global variable to track the rendering pass number... but it sounds crapy kind of solution...
If someone has an idea.
Concerning
Hmmm...
the AEGP_GetActiveItem and the AEGP_GetActiveLayer seem incorrect.
the 'active' isn't necessarily means YOUR layer.
your effect is rendered no matter what layer is active.
try to use AEGP_GetEffectLayer, which is guaranteed to give you YOUR effect layer.
I hope that will solve the problem.
-
Turning off the display during the rendering?
Hi all-
quick question for you, is there a way to disable the display of images in rendering? And if so, it helps the rendering process run faster?
Thanks in advance
Sincerely-Douglas
Yes, and it will make it faster. You can press Caps Lock shift once again to see the rendering to check on progress and press a second time to turn it off. It is really very convenient.
-
The videos are blurred when recording a DVD or a hard drive, but in Windows Movie Maker
I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker. When I play my movie in WMM, everything is great! When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any! When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.
I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker. When I play my movie in WMM, everything is great! When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any! When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.
=================================
The following links may be worth a visit:Movie Maker and Flip digital camcorders
http://www.Papajohn.org/mm2-CamcordersFlip.htmlSince a Windows Movie Maker Flip video cameraMight be worth trying to convert your MP4 files to the
Before you import into Movie Maker WMV format.The following freeware can convert:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)First... after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
If the resolution of your finished video file is always
unsatisfactory... you can watch in the use
Custom settings.Windows Vista
Create custom movie settings
for Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-MakerThere are some profiles which can be copied from
the following site that will work in Vista Movie Maker:Personally, I use the profile .wmv
When recording movies.
Slide show-1024x768WMV9Download from the following site...
Movie Maker 2 - economy
Movies - profiles custom WMV
http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.htmlRight click / Save as... drop in the following folder:
Folder of C:\Program Maker\Shared\Profiles Movie
(if there is no record of profiles... you will have to create it)Choose "Show-1024x768WMV9" when you publish (save)...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
My problem is similar to the question asked by EamonnO. Start a 'open with' screen opens asking what file to open chkupd with. I think that hit "Cancel" would put an end to the action. He appears periodically during my session on the computer or watching a movie. I don't find the file using search. I don't think that this means Daemon Tools because I never downloaded the program. Some recent downloads include "Free File Viewer" and "Search for free Extension". I have Vipre AV and System Mechanic running on my computer. The situation may be harmless, but it is sure agrivating. Thanks for any help you offer. George
Hello
I had the same problem and there to remedy I just open the control panel and open then "Add / Remove programs. The popup is apparently caused by a free File Viewer program. I removed the program by clicking on the button Delete and the problem disappeared. The free file viewer comes with a conversion program free .mp3 and seems to be completely unnecessary (I never needed the viewer of the file and open it with popup that was originally was boring and sometimes even nervewracking.) If you do not have to uninstall programs of assistance, just the viewer of the file that comes as a free supplement program (problem).
Once again, removal procedure: click on 'start '.
Click on "Control Panel."
Double click on "Add or remove programs".
Click on "Free File Viewer" in the list of programs
Click 'delete '.After this, the 'chkupd' open with popup when it stops appearing.
Craig
-
Sound on video not available when I remote in the work
I have a VPN connection and use Office access work computer remotely. Recently, the audio on the video of the encounters that I need to access the resignations of work. Our work, HE said that it is not their problem. Some recent updates is affected remote to access the sounds. He worked for several months, but now does not work. I need the sound to do my work remotely
Hello
If you think that the recent updates caused this problem, let us know the number of the update has been installed on the system. Click on the link below.
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
The question you have posted is related to the VPN (Virtual Private Network) and it will be better suited in the TechNet community. Click on the link below.
http://social.technet.Microsoft.com/forums/en/categories/
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
where can I find images in the finder
Hello everyone, I find photos in the finder in case I want to open it with another (Lightroom) software? PS: I totally hate the new Photo, but that's me.
-
I have a computer laptop flex 2, every time when I start up and connect to my laptop, once I have connection it restarts automatically, with follow-up rtdrive of face written on the top left corner. This is repeated 3 times befor, I can finally use m
-
Since three days ago I was able to open my mail or delete in my hotmail account. Microsoft when I rang suggested them I try another computer, if I had a. I tried my netbook and was able to access the account of hotmail as usual. I have Internet
-
I'm trying to install the VZ Manager and get the driver failed1603 message. I tried "msiexec/unreg" and the file is not found. All ideas MJ
-
Hello I had a problem with the black screen after logo window at startup. To solve it, I installed fresh windows 7 on my laptop Pavilion dm4 1140EZ. My laptop has Intel HD and ATI mobility Radeon 5000 graphics cards. On the HP site I downloaded the d