The videos are blurred when recording a DVD or a hard drive, but in Windows Movie Maker

Similar Questions

• What type of DVD should I buy to burn my Windows Movie Maker movie? Also, I have Windows DVD Maker, but no DVD burner. What should I buy?

  I created a movie in Movie Maker.  I bought some DVD + r's - the correct burn the movie on?  Also, I don't have a burner, I thought that I did, I can only burn a CD what should I buy?  I don't have a Windows DVD authoring program.

  Hi rondah,.

  Welcome to the Microsoft community newsgroups.

  The type of recordable DVD, you need to use depends on your DVD burner, as well as on your DVD player. Some DVD burners can burn only to certain types of DVD recordable. For example, with some DVD burners, you can only record to DVD + R discs or DVD + RW or DVD-R or DVD - RW discs, while some other DVD burners will let you burn on all of these recordable DVD types.

  As long as your DVD burner supports burning to these types of discs, you can use Windows DVD creation to burn a DVD using one of the following types of recordable and re-recordable DVD media: DVD + R, DVD + RW, DVD - R, DVD - RW, and DVD - ROM. These recordable or rewritable DVDs can be either simple single laminate or single sided double layer.

  You should also consider the device you're using to play the DVD once you have engraved, if possible. Some DVD players and DVD - ROM drives play only certain types of DVD. To determine what types of DVDs your DVD player or DVD - ROM drive can play, see the documentation that came with your device or go to the manufacturer's Web site.

  For more information on which is a DVD burner and why do I need one? Visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-a-DVD-burner-and-why-do-I-need-one

  For more information on the DVD-Video burning / publish a movie in Windows Movie Maker / Windows DVD Maker

  1: burn a DVD-video disc

  2: DVD-video burning: frequently asked questions

  3: Demo: create a DVD-video disc

  4: change Windows DVD Maker DVD-Video settings

  5: solving problems with creating a DVD-video using Windows DVD creation

  6: which CD or DVD format should I use?

  7: disc burning: frequently asked questions

  8: publish a movie in Windows Movie Maker

  9: work with projects in Windows Movie Maker

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• The icons are blurred when size large.

  Recently, I've migrated to W7 from XP and the difference is everything to do huh... shock... Out of the box, it takes a little tinkering before it becomes bearable. One of the settings that I need is linked to icons.

  When the icons are huge (although probably 'normal size' for other people) they look washed out; not crispy. But when they are small, they look like if they were designed by an Impressionist painter. Don't get me wrong, I don't like the Impressionist paintings... in a Museum of fine arts. But I need clarity on my computer (just a tool). Old W3.11 icons can appear very 'yucky' and 'old fashioned' and maybe not to everybodys taste, but at least they were clear.

  For example: the 'Open folder' icon in a file Explorer resembles a yellow arrow pointing upwards and left disorder. (It took me a few days and another computer where the icons were huge to know that it was supposed to be a folder on the open side and sligtly). The icon of a zipped file is just a blur (a bit like an injection of ICT). A text file icon is just a white field with light grey edge that is barely visible or recognizable. Microsoft Office icons can be identified by their colors. But any other program that uses a fuzzy green icon could easily be confused with Excel...

  What I've done so far:
  -Check the calibration of the screen color, contrast, and brightness of the screen. I used to work with images and not easily convinced, but increases the clarity of icons ruined space color photos, so it wasn't an option.
  -Clean the screen. Not really necessary, given that I don't have a touch screen and use the mouse pointer to point to something on the screen and not a greasy finger.
  -Cleaned my glasses... No improvement.
  -Also, I checked my sight, and even if I don't probably are not eligible as a fighter pilot is about right.

  Then... Here's the question, and beware that on the computer on which I work: I don't have the admin rights.

  -Can I exchange all the default icons (folders, files, text, files, programs, etc.) for crisp and clear icons?
  -If Yes, how can I do that?

  Thank you

  PS: Increasing the size of the icon is not an option... I.m.h.o. it's just a waste of valuable space!

  I have it!

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  In order to have sharp crisp icons: the font to 100% settings you NEED
  Adjustment of the police of the superior results of adjustment in Fuzzy icons. Checked!

  If the fonts in the menus are too small, then go into the control panel-personalization-> choose the color of the window and start clicking on follow-up to the 'window color and appearance' me to adjust the fonts of all menus to your liking.

  In numerous menu now fonts will increase... However: there are a lot of dialog boxes and places that will always show a smaller font size? For example: just press 'Start' in the lower left corner.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  In my - probably not if - humble opinion, Microsoft could do that much easier...
  Just make the size of the icons regardless of the font size!
  (And Yes, I program a bit myself and am aware that can screw things up (allocation of space, the alignment of the text and icons, etc.), but these can probably be repaired by one or two lines of code).

  Given that I don't see anything menus native windows for me is kind of correct... I'll make that a test. Some heavier style modding is required to fix those windows errors, that may be feasible at home, but not at the office...

  Thanks for all the help!
  I learned a lot of things that I didn't know! ;-)

  Detective Conan!

• some of the photos are blurred when I start

  Some of my pictures are blurry, and some are not.

  Blurry newly imported photos

  Maybe it's that you just need to wait a minute or two, until they become sharp (you still haven't said how long wait to decide they won't be strong)

• During the video capture source SD files take several GB of hard drive space, these SD files are not that big, is there a setting we miss them?

  Any ideas on that?

  You're probably capture uncompressed (which holds approximately 1.5 GB / minute).

• Edition file Windows Movie Maker as my Windows DVD Maker solution get an error unspecified 1.6% each time?

  I can't publish my holiday video (multiple files linked together by me in Windows Movie Maker with title screens before each clip and music) as Windows DVD Maker claims an unspecified error of 1.6% each time. I changed the output directory, but that did not help. Also, when in Movie Maker / a lot of DVD Maker icon stream through the bar near the clock, some white with small print out and some red with "Ffv", which I can only think fact obstacle to the whole process!

  I was wondering if I could download it my Windows Movie Maker in another free DVD file, making the software and if you have any suggestions?
  Thank you

  Last reply first... No, are the Movie Maker project files
  not compatible with other video editing software.

  You are running Windows or Vista Movie Maker 6
  Live Movie Maker?

  It is possible that your project is too complex for
  your system resources but it is more than likely
  some of your files source (Photos, video Clips,
  Audio clips) are not fully compatible with Windows
  Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Conversion to formats compatible before importing
  in Movie Maker may be the solution.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup290.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup290.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Windows movie maker now crashes whenever I do drag and drop an audio file in the main window, what I can do?

  Signature of the problem:
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6002.18273
  Application timestamp: 4c1a4a61
  Fault Module name: StackHash_fd00
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 00000000
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
   
  ___
  Data Execution Prevention - I can't turn off for WMM and I can't uninstall and re-install WMM...

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3 is confined with any particular audio file?

  4. what happens when turninig turn off DEP for the program?
  In some cases, a file with a file type that Windows Movie Maker does not support may cause Windows Movie Maker stops responding. This can be caused by incompatible video filters. You can verify what filters are installed and force Windows Movie Maker to avoid loading specific filters by restarting simply Windows Movie Maker.
  Method 1:
  You can solve the problem by following the steps from the link:
  Problems with importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker
  Method 2:
  You can also perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can see the city link below to download the codecs on the computer.
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Qosmio G20 - XP doesn't see second HARD drive, but the BIOS is

  Hello

  Mylène for the long post - but think if give good info, I poss of correct answer:

  After the crash of QOSMIO G20... managed to reinstall of XP Recovery DVD-ROM. Immed after, looked at the config with Win Explorer and two hard drives all present and correct. even copied a picture of my images on the D: drive, just to make sure that all aok.

  Then downloaded SP3 and tried to install - it reported failure and then shut down the PC. After attempts to get again - until finally resorted to reuse the Recovery DVD-ROM.
  Come back XP again - but now, while the BIOS sees two hard drives (reports size, Fab details, etc.), as far as Windows is concerned, it does not exist.

  Tried to initialize in disk management - no sign there.
  He was then released, put it in a shopping cart, connected to the office and initialized and formatted - then returned to mobile... zilch!

  Your kind suggestions and recommendations could save just the remaining strands terrified of hair of a violent end...

  A lot of TIA
  Logis

  Hello House,

  Normally, if the BIOS recognizes the HARD drive, but not Windows, this means that the HARD disk is not formatted, but it must be visible under the Windows disk management.
  You see it now?

  If not it is not easy to say what the reason are you should try load default settings in the BIOS and save it. Then start Windows and check if HDD is visible there too.

  In the worst case, it s that a malfunction of the HARD disk controller, but what you can test if swap you the two drives and put them in another location.

• When you watch a video on youtube, if monitor blanks in order to save, when he took over, the video area is green (undiscounted) but the sound continues to play.

  Steps to follow:

  1. video play correctly on youtube
  2. because I am just watching and not press a key or move the mouse, the display will be blank after a few minutes of energy saving
  3. I move the mouse to wake it up
  4. the video area is green, while the sound continues to play
  5. If I change jobs, the area of the other task gets painted above the video area, it seems that are the video is never updated after suspends / wake

  Hello

  Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

  To turn off hardware acceleration in Flash Player:

  1. Go to the Adobe Flash Player help page.
  2. Right-click on the Flash Player logo on this page.
  3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
  4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.
     
     

     

  5. Remove the enable hardware accelerationcheck box.
  6. Click close to close the Adobe Flash Player settings window.
  7. Restart Firefox.

  This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

  Does this solve the problem? Let us know.

• How to make a vertical video clip when it is on the side in Windows movie maker Vista

  In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?

  In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?

  ==========================================
  I assume you are using Windows Live Movie Maker?
  (if you use Vista Movie Maker 6... See the last article)

  Windows Live Movie Maker can turn a video clip, but you
  may need to convert the video to a compatible format like
  . WMV, before you can import it into Windows Live Movie
  Maker.

  See the following screenshot.

  Windows Live Movie Maker - rotate 90 ° right
  http://www.howtogeek.com/wp-content/uploads/2010/04/sshot710.PNG

  Also... the following article is maybe worth a visit:

  Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
  http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/

  After having shot the video... Save it in the WMV format.

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

  And the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free Video Flip and rotate
  (XP SP3, Vista, 7 and .net Framework 2 SP2)
  http://www.DVDVideoSoft.com/products/DVD/free-video-flip-and-rotate.htm
  (* You can uncheck the options to install the)
  DVDVideoSoft Toolbar and iTunes plug-ins *)

  How to use Free video Flip and Rotate
  http://www.DVDVideoSoft.com/guides/free-video-flip-and-rotate.htm

  Movie Maker - how to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

• Windows Movie Maker 6.0 error during recording: check if the original sources are still available, the saving location is available and if there is enough disk space

  Original title: Windows Movie Maker 6.0 Save Bug?

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  ============================
  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• My photos - just uploaded to iCloud photo library - are blurred when I open them on my iMac.  Why?  How to fix?

  My photos - just uploaded to iCloud photo library - are blurred when I open in iCloud photo library on my iMac.  I expect but they never sharpened.  Why?  How to fix?  I was not able to determine our a way to fix this despite research for hours on the forums.  For any help or suggestion will be useful, I'm sure!

  Using iMac 21.5 in. (end of 2009), processor Intel Core 2 Duo 3.06 GHz, 4 GB memory DDR3 1067 MHz

  El Capitan 10.11.4 running

  You have the iCloud library enabled and the option to optimize the photos in your local photo library?

  

  If so you probably watch optimized versions that will be much smaller a not very strong.

  

• My Canon Power Shot D10 and Flip Ultra HD take videos that are NOTaccepted by Windows Movie Maker because of the type of file.

  This converter is recommended for cameras above so that I can edit, trim & merge video clips of the cameras above for use in Windows Movie Maker? I am able to download the. Files MOV of the Canon Power Shot D10 in MY DVD but each clip plays individually without a smooth merger. When I tried to merge the clips using a free download Wondershare clips merged but no audio came through. Now I have a Flip Ultra HD, which has MP4 files. Thanks for the tips.

  I like the "Super."
  http://www.myvideoproblems.com/webpages/UsefulProgrammes.htm

• When I return in a recorded video on windows movie maker, all executives went black and have a yellow warning marker.

  When I return in a project recently recorded on windows movie maker, all executives went black and have a yellow warning marker, the sound also went but the name of the track is always above executives

  Hi steveXB,

  1. did you of recent changes on the computer?

  2. this happens with all registered projects?

  3. you have any program installed on the computer for photo editing?

  I suggest that you disable video filters windows make of film and change, if that can help.

  Change the video filter settings

  http://Windows.Microsoft.com/en-us/Windows-XP/help/MovieMaker/change-video-filter-settings

  Windows Movie Maker: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ

• Impossible to publish a wswmm on computer or dvd into a video file with windows movie maker, after the edition of a major project

  Impossible to publish a wswmm on computer or dvd with windows movie maker, after the edition of a great project - error message stating "cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again"

  the source files are all there and I have more than enough space... Please help (project video wedding!)

  Thank you thank you thank you...

  chop my project and publish it on computer, mix files together on the creation of dvd windows... it worked!

  you saved me break my laptop into 1 million pieces... thank you once again!