my virtual printer has an error status

Similar Questions

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• With no paper in the tray, the printer has no error light. As soon thre is paper in the printer, I get error lights.

  Original title: what a printer problem.

  When no paper in the tray, my HP PSC 1400 no flash no lights error, however when the cartridge is mounted on the inside, it flashes error lights. As a result, I can't take a printout and I feel buried in the huge pile of unfinished work. The window so that HP behave as if they have nothing to do with it or the problem is bigger than their power; Well, I don't have to go, but to spread my shirt in front of you as if I'm begging!

  Contact HP support or post in the forums.
  What is your shirt has to do with it?

• Printer has stopped working - status of network offline

  My Officejet series 4600 (4622) worked well for almost two years with a USB connection. Yesterday I interrupted while he was printing a document (something I've done before), and then I could not do print again. The computer can detect the printer but says it is "not connected".

  The powers of printer on / off power of the fine. He made copies. It is not blocked. His configuration of said network status page: Type of connection offline and Active: No.

  Also the printer does not print with the laptop that we print occasionally. The laptop also says that the printer is not connected.

  I tried turning power and off the computer, the printer (separately and together) and the router. I changed the printer cable for different ports on the printer and the computer. I got a new printer cable. I used the doctor scanning & printing to HP. I removed the printer and re - he added. I uninstalled the printer and re-installed driver software (the latest version). Nothing has worked.

  Do I need a new printer, or y at - it a solution that I have not tried?

  Thank you for your help... After posting my problem, I found that it was indeed a connection problem with the cable.

• My printer has an error 0xc19a0003 message. HP photosmart Plus

  I have the hp photosmart printer more.  CN218A product number and model number B210a.  It has been printing fine until today and it says 'system failure-0xc19a0003 of ink '.

  I turned the printer market even as it says on the screen and it did not help.  I also unplugged the printer from the computer and making electric and re-tried to no change.

  Help, please!

  Normally, an ink system failure message points to a problem in the printhead of the printer. This document will take you through a few things you can try to do to solve the problem. If this does not work, check the date on the print head. The day is the print head was performed. The printhead warranty expires two years after that date. If the print head is under warranty, contact HP for a new. If the print head is out of warranty, follow the steps in the post of Bob_Headrick to do a physical cleaning of the print head nozzle. Does not use the post to Bob_Headrick if the printer or the print head, is still under warranty. If this does not work, you can contact HP to buy a new printhead, or you will need to get a new printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• HP Photosmart C309a printer has error 0x61011be5

  My printer has a gear grinding noise and the 0x61011be5 error message. You will find a short solution to buy a new printer? Thanx

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart Premium Fax all-in-One Printer - C309a<- product="" support="" and="">
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3737195&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Software & Driver Downloads - HP Photosmart Premium Fax all-in-One Printer - C309a<->
  your version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3737195&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Explorer has stopped working - error status Code - c000009c

  Original title: Windows Explorer has stopped working - debilitating Error Message

  On my main account, I keep getting an error message that pops up every 4 to 8 seconds and freeze the rest of the screen. It comes from Microsoft Windows and the error message indicates that Windows Explorer has stopped working the details include:

  Signature of the problem

  Problem event name - InPageError

  Error Status Code - c000009c

  Media Type-00000003 vulnerabilities

  OS version - 6.0.60012.1.0.256.6

  ID of locale - 1033

  Additional information 1-40 d 4

  Information additional 2-4062ad41ec8067256aa4c5e2b56d3c79

  I can't access the internet and my computer through my secondary account - I of course tried closing down and restart a dozen times, I have ensured that all the Windows updates are installed and I am at a loss for what I could do. Any help would be so appreciated, because I'm working on my computer and couldn't since a few days - get desperate!

  Thank you very much!

  Thank you

  Hi Jessicaco,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Explorer-crash-bug-Explorer-has-stopped/06f4ac0c-E486-491e-8861-30903b8791b1

  I hope this helps!

• Unexpected i/o error has occurred. Status: 0xc00000e9 setting from the Setup program

  Please, I have a Toshiba labtop, what sudenly accident and it does not open windows, this message appears at the beginning upward: unexpected i/o error has occurred. Status: 0xc00000e9

  Hello

  The error - an unexpected i/o error has occurred, status: (0Xc00000e9) is a material error in the BIOS of your computer. Basically
  It is tell you that the computer is not able to communicate effectively with the hard drive.

  Try the Startup Repair. Startup Repair is designed to prevent a time-consuming reinstallation of diagnosis and repair of problems which
  prevent Windows to start. Introduced in Windows Vista, startup repair is even easier to use, because Windows 7 now installs on your
  hard drive for you.

  See the links below for more details:

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I also suggest you to update the BIOS. Update the BIOS, contact the manufacturer of the system!

  Note: Changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot
  guarantee that problems resulting from the configuration of the BIOS settings can resolved e. Changes to settings are at your own risk

• The MS Virtual WiFi Miniport Adapter on my new laptop computer has an error code 31.

  The MS Virtual WiFi Miniport Adapter on my new laptop computer has an error code 31.  I tried to update the driver but no change.  Driver date: 21/06/2006, driver Version: 6.1.7600.16385.  Also get errors BOUNCING 'blue screen '.  The Virtual wifi miniport adapter error would be a factor? My laptop is old 3 days and the only programs I have installed MS Office 2007 & Norton Antivirus Internet

  I've heard rumors as if it were a set of chips intel, they have just released new drivers last week.

  It's two days old, I think that return to the store and get another would be in order...

  Latest Intel drivers:
  32-bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18211&ProdId=3062&lang=eng
  64-bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18212&ProdId=3062&lang=eng

  Help others by letting us know if something solves your problem. Click useful Vote for those who help.

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• Adobe Business Catalyst unknown error has occurred. Status: 0,0.

  Adobe Business Catalyst unknown error has occurred. Status: 0,0.

  Cannot download Muse.

  Please, disconnect you muse and creative cloud and close them.

  Re-open, connect again to CC and then open Muse and publish again.

  Thank you

  Sanjit

• Unknown company catalyst error has occurred. Status: 503,0.

  Salvation;

  Does anyone have an idea what all what it is?

  Unknown company catalyst error has occurred. Status: 503,0.

  I get this in trying to Pulblish a site through Adobe Muse

  Lokks like I just answered my own question...:

  http://adobebcmigration.com/

  regular maintantence

• BCC error in reading has persisted in status

  Hi friends,
  
  I was in the middle of the deployment, sudden hard drive was full, so I had to stopped deployment and restarted CCI now
  get the following error:
  
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer error has occurred reading status java.io.EOFException persisted
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to java.io.ObjectInputStream$ PeekInputStream.readFully (ObjectInputStream.java:2228)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to java.io.ObjectInputStream$ BlockDataInputStream.readShort (ObjectInputStream.java:2694)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:761)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to java.io.ObjectInputStream. < init > (ObjectInputStream.java:277)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.deployment.common.Status.read(Status.java:2613)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.deployment.common.StatusUtil.read(StatusUtil.java:400)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.deployment.server.DeploymentServer.recoverDeployments(DeploymentServer.java:2160)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.deployment.server.DeploymentServer.reinitializeTopology(DeploymentServer.java:1756)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.deployment.server.DeploymentServer.doStartService(DeploymentServer.java:1229)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.nucleus.GenericService.startService(GenericService.java:496)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.nucleus.NucleusNameResolver.startService(NucleusNameResolver.java:1385)
  Error Tue Feb 21 16:11:12 GMT + 05:30 2012 1329820872344/atg/epub/DeploymentServer to atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1133)
  
  
  Thank you
  Abdelali

  Hey Kro,
  Found following tables which requires cleaning. Remove your data from these tables project.

  epub_workflow_bls
  epub_workflow_dbls
  epub_workflow_lngs
  epub_workflow_ris
  epub_workflow_strs
  epub_workflow_vfs
  epub_proc_taskinfo
  epub_taskinfo
  epub_proc_history
  epub_pr_history
  epub_history
  epub_prj_tg_snsht
  epub_prj_targt_ws
  epub_pr_tg_status
  epub_pr_tg_dp_ts
  epub_pr_tg_dp_id
  epub_pr_tg_ap_ts
  epub_int_prj_hist
  epub_ind_workflow
  epub_proc_prv_prj
  epub_process
  epub_project

• printers HP 7610 stops at halfway printing or returns error on win8.1 (wireless configuration)

  Help please...  Just got the printer large format 7610 a few days ago and installed everything fine on win8.1 from the CD and select the wireless option.

  All right, except if I try to print one full photo page, or something other than a small photo or a document.  The printer stops printing before it's over or a useless error message on the screen saying "printing error on HP Officejet 7610 Series (network).  With no other info.

  Sometimes the picture full page prints completely, but after a delay of 10 seconds, the error message appears on the computer.  It's as if the computer has not received a "finished printing" status message of the printer.  Maybe after a time-out period, it displays the message, assuming that there is an error with printing.  Basically, the handshake seems wrong.

  I tried to print from several programs, such as Picasa and Irfanview.  I disabled my anti-virus software too.  I enabled the discovery of the public and private network and printer and file sharing too.

  But... If I go to control panel > printers and peripherals > and select "add a printer".  And add another printer 7610 (which only allows you to select the driver "7610 series class driver"), this second printer (with the "class driver") will not get the error.  However, this printer has all the options of paper and some other features of the 7610 printer selection.  This second printer uses a "TCP/IP Port", not a "WSD" port as the (network) install uses.  So the question is somewhere with WSD port / protocol services device, which uses the installation of the HP printer on the CD of the web site.

  7610 (wireless network - using the WSD port) printer driver seems to have a major problem.  Help, please.  I can't print the large 13 x 19 even images I got this printer, since it will not be printed a large full photo.  The wireless communication protocol or the Protocol seems terribly flawed.  I use 802.11 WPA - PSK with high quality signal (first level 5).

  Thanks for any immediate help or clues.  I went through all the normal stuff.  verified that all software are up-to-date.  There is no firmware downloads available, the firmware in the printer is the most recent.  powered and on all 3 devices (printer, router, pc).

  ... Edit... The only solution I came with is go to control panel > display devices and printers > right click on the printer, select the printer properties > Ports tab and change the "WSD" port to one of the unused ports "TCP/IP".  This causes a second printer to add to the list of printers.  In this way, I have media and the paper size options.  But I'm afraid I've lost all the features that come with using WSD port peripheral, such as scanning, web services etc..

  It is the only solution to this problem that worked for me. Why it has not been resolved by HP after all this time I'll never know.

  http://troubleshooting201.rssing.com/browser.php?indx=14839819 & Item = 2327

  More specifically - that part of the above page, it is what solves the problem-
  
  Find out what IP address, is that your printer uses.
  Go to control panel, then click "View devices and printers."
  Look for your printer right click.
  Click on "Printer properties" and a new screen opens.
  Along the top, you will see some tabs. Click on the one that says "Ports".
  Click on 'Add Port '.
  Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen opens.
  Click "next".
  Type the IP address of your printer, and then click "next".
  Your computer should find your printer.
  Click 'Apply' and your printer should work fine.

• printer does not print, it says error: 0xc18a0307

  indicates the error: 0xc18a0307.refer to the documentation of the printer...

  the unit is photosmart c5183... tried to switch market but same indication appears...

  Hello Alvin200861

  I came across your questions and we have a solution for this and you can try it, but which apply only on the error codes starting with "0xC18A" one with «0xc19a»

  Try the following steps for Photosmart C5100 series under which you printer falls.

  A. - Press and hold the "left arrow" key
  B. - Press the "Setup" key and release both keys.
  Display should say "enter special key Combo".
  C. - Press and release the OK"" button.

  Display should say "Support" and display the FW rev (something like R0631R)

  Press and release the right arrow button until the display shows "Menu of the System Configuration'.

  Press and release the OK"" button.

  Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

  Press and release the OK"" button.

  Display should say "hardware failure status: clear." Press OK to erase.

  Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

  Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

  Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

  If the error is still there, or reoccurs replace the unit.

  -----------------------------------------------------

  0XC19a error messages, the printer can be retrieved.

  Good luck and if that fixes the problem please click on Bravo...

  ---------------------------------

  Although I am an employee of HP, I speak for me.