My wife and I Wed writing.and like a software.and good free speech would record it in My Documents in Windows.

Similar Questions

• Windows Acer v3-571 2012 new updated checked all 10 drivers on wifi and bluetooth does not

  I have all ways been an Acer since 2004 my Aspire 2012 v3-571 worked well windows 8 8.1 now am windows 10 pro, but I can't find the drivers to run WiFi and bluetooth.

  I checked all your drivers on site for my model from 2006 to 2014 and the only driver that is in the 16/06/2015 is Realtek High DEfinition Audio.

  You can send Martin alieu were I can it please.

  never had this happen to me

  Thank you

  E.Taffa

  GOOD DAY MY FRIENDS, THIS IS THE DAY I LOOKED FORWARD TO KEEP FROM THE START.

  I WIPE LAPTOP WIN 8.1 AND NOW WIFI AND BLUETOOTH I HAVE TRIED TO NO DIFFICULTY PASS.

  WINDOWS 10 UPGADE WIN 8.1 INSTALLATION 174 WHILE I STARTED DAY THEN YUST BEGINNING UPGRADEING AS I THOUGHT IT CAN'T GET ANY WORSE AFTER UPGRATING TO WINDOWS DOWNLOADED 10 V3-571 2012 WE WIDOWS 8.1 HAS NOT, I CHECKED WINDOWS 10 EVEN I RELOADED TH YUST EVEN I WAS LOADING ALL MY APP AND THISWENT ISTALLING RESTART I CLOSED TOP PC YUST AND WENT OUT TOP PC OPEN BACK CAME I HAVE 2 LIGHTS BLUE AND 1 YELLOW , I CHECK IT WI - FI IS THE BLUETOOTH IS ON YOU, THE BEST.

  Best regards

  E.TAFFA

  PS show me how to give kudoo or what his name, I give the amount of maziment

• Device, I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  http://www.ARCHOS.com/support/support_tech/index.html?country=us&lang=en

• Any benefit to have the Wifi and Ethernet simultaneously?

  There is better performance, have Wifi and Ethernet switched on at the same time?

  It seems strange that I can have both at the same time.

  Outside access to printers wireless enabled (which is not relevant to me), I would like to know if there is an advantage to internet high speed.

  No,

• can't see time capsule, but can use the wifi and mount

  I have a 5th Gen (A1470) Time Capsule on our network. The WAN ethernet port is connected to a router. The TC has a static IP address, Wifi is enabled (on the TC) and router mode (bridged).

  I have hard reset the Time Capsule and reconfigured as above before you perform backups on all devices.

  We have two iMacs, two MacBook Pro and a Mac Pro (2009) backup fine both via ethernet (via a router and also directly in the transport CANADA ports) and connections Wifi of TC. One of the iMac running Yosemite the rest are El Capitan.

  However, I have an iMac on the WiFi network that cannot find the TC in the Time Machine or the Airport utility preferences. However, it can join the network Wifi of TC and attach it using the Finder. I've also disabled Wifi and iMac directly connected to an ethernet port on the TC, but he can't find it in the Time Machine or the Airport utility preferences.

  I followed the instructions from LaPastenague to Re: utility Airport can't find Time Capsule. I also reset the PRAM and SMC. No luck.

  The iMac is a 2011 model.

  I have an iMac on the WiFi network that cannot find the TC in the Time Machine or the Airport utility preferences. However, it can join the network Wifi of TC and attach it using the Finder. I've also disabled Wifi and iMac directly connected to an ethernet port on the TC, but he can't find it in the Time Machine or the Airport utility preferences.

  Just to check... what operating system is this iMac?

  You have ipv6 local link only the value... This is important.

  Make sure your network is running DHCP and DNS address is the same as the other computers.

  Make sure that the computer name is short, without spaces and pure alphanumeric characters.

  No luck, it's time to do a reset of the TM.

  Pondini instructions still work.

  I would remove plist Time Machine and redo the configuration... you don't lose the current backup... you may even do this...

  A4 here. http://pondini.org/TM/A4.html

  Honestly if that don't fix it... it is time to download and use Carbon Copy Cloner... because the TM became too difficult...

  Depending on what operating system you are on. TM has a version of command line... TMutils.

  I would like to confirm Apple it have not eliminated.

  I rarely use... I think that if it does not work via the installation of normal preferences... then it became time to use CCC which is what I do. Or run them both so I don't have a good backup.

  ne.html http://www.Macworld.com/article/2033804/Control-Time-Machine-from-the-Command-Li

  Some commands should be useful just to see the installation program.

  for example

  tmutil destinationinfo

  > ==================================================

  Name: TimeMachineBUP

  Type: network

  URL: afp: / /; AUTH = none % 20User % [email protected]/TimeMachineBUP

  ID: CFD5ED31-5884-47E7-8575-D29F65C044D8

  ====================================================

  Name: data

  Type: network

  URL: afp://Ray%20H; [email protected]/data

  ID: 2FB1A587-CD30-4A62-A4E3-2743C9C22469

• WIFI and Signal are Orange, Google game does not load

  Hello

  Last week I had various problems with my phone (Moto G, Android 4.4.4, bought new AT & t in may 2015) and I don't know if they are related. Here are the symptoms that I noticed:

  • Battery drains faster than usual when not in service (during the night).
  
  
  
  • Play Google Services does not (so I can't update).
  
  
  
  • WIFI and cellular Signal icons are the two Orange all the time (even after the ignition and the device).
  
  
  
  • Texts are reluctant to send, and some other applications are difficult to load.
  
  
  
  • Lock screen does not always work as before.
  
  
  
  • There are other various small bugs that appear now also, but none that affect significant my use of the phone.

  Here are some of the things I've tried:

  • Turning and the phone.
  
  
  
  • Turning and WIFI.
  
  
  
  • Turning and Mobile Data.
  
  
  
  • Empty the cache to game Google and other applications.

  Normally with this many questions I would like to replace the device and not buy from this manufacturer again for several years, but this time I have a payment plan with AT & T and still have $80. Am I out of luck?

  Thanks for your help.

  I did a Factory Data Reset and everything is corrected now.

• Feature Wifi and Blueetooth lost Lenovo Tab2 A7 - 10F (Indian model) running Lollipop 5.0

  I am a user of Lenovo Tab2 A7 - 10F of the India. Bought this three weeks back. It came with Kitkat, updated to lollipop without any problem. Bloatware rooted and deleted some. Subsequently removed 3 launcher and pushed Apex Launcher system. After completing all the changes I need, I cleaned the dalvik cache and restarted the system. My goal was to remove the root access which I already brought changes that I held. However, I forgot to open Kinguser and revoke access root. Instead, I went and cleaned dalvik cache and reset the tablet. Tablet starts fine, launched with Apex fine pitcher, but he lost two features namely; WiFi and Bluetooth. When I try to turn on those two, it fails to turn on. The toggle switch itself back immediately. I tried to reset the Tablet using default recovery (he is in Chinese, for some strange reason) but it produces the same result, the Wifi and bluetooth turn on again.

  Anyone faced similar problems? Anyone has any ideas how to fix this? If not, I guess that the option is to reinstall the lollipop or Kitkat again. If Yes, can someone send me the links where I can download an Indian version of default good untweaked ROM (Kitkat or lollipop). Also I would like to know how to install it. It would be better if there is an option to update the pacifier using default recovery itself, so that I can drop the ROM in the SD card and update. Also my recovery being in Chinese, it would greatly help if someone help me to identify the lines click to update by placed SD ROM

  Moderatorss can close this thread. I managed to flash the tablet with Kitkat and stick with it. Not too well rooted. So, the problem is resolved.

• WiFi and convertibles - HP envy 2 x and flag 2 x

  Hello

  My husband and I both have a x 2, a craving for x 2 Pavilion and HP. The problem is wifi connectivity. At home we have no problem, we can connect without any problems, we may also share with our little (operated by our mobile company) mobile wireless router without any problems. However, the work once we have connected two or three minutes it freezes with only the cursor on the active screen. Everything is completely frozen. The only way out is to restart the machine in operation in the power button for 5 seconds.

  We tried all the solutions google has to offer, even tried those proposed by HP, uninstalling the driver to roll it back, to the evolution of the use of the meter. Nothing is at work, it is impossible to connect to wifi without it freezing.

  What could be the cause of this? could there be a security setting, or the network eventually sees the devices like mobile devices or tablets rather than the pc? I'm running out of ideas, any help with this problem would be greatly appreciated. I have always supported HP and loved products - I would not admit defeat!

  Not to worry this issue has been resolved - just need some parameter to set so that the network could encourage a username and password... proxy!

• WIFI and Bluetooth image appears on the screen

  A WIFI and BlueTooth image continues intermittently to appear on my screen.

  If I touch the WIFI switch on my PC, the image opens too.

  I don't know if it's an image of microsoft or something else caused by malicious software.

  I would like to get rid of this image. Does anyone know how to do?

  I could send you a picture of the image.

  Thank you.

  Hello

  1. What version of Windows are you using?
  2. Have you made changes on the computer before this problem?

  I suggest you run the fix that it follows and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send additional information to help you better.

• Problem WiFi and bluetooth (ultra xa)

  I have a xperia ultra xa for two weeks now and I think I found a bug with this phone.hummm

  1. I normally connects to the wifi work while Im at work and I don't menually turn off wifi, the end of the day when I got home, it freezes on the same page. When I try to refresh the wifi spot, it shows me all the hotspots wifi at work and I have to restart my phone to fix this problem, I tried to turn on the wifi and the new, no luck.

  2. I have a word of sony bluetooth to my room, he pairs with my phone using nfc, I do carry my phone in my pocket at home when I listen to music and I get out of the music range stops, but then when I walk back and try of reconnects with my word, it looks like to connected normally but all the music comes out to talk to the on my phone instead of talking about the bluetooth to my room.

  BTW sony have still decided to include the raw photo format in their phones?

  Location settings tap high three dots to the right then turn the two sliders to the off position. They are both set to analyze for connections even if it is in use.

• WiFi and bluetooth cannot be turned on

  Hello guys, I had some problems with my Sony xperia smartphone z3, well it was like in faritayl one morning I woke up and sow that WiFi was off, I tried to make it again on but the wifi icon dose not react, the same thing when I try to do it on in settings it does not react , I'm a go on settings, and when I return to the wifi setting sound off again, the same problem with bluetooth. If anyone can help me please write me, I'll be very happy, I thank you for the attention.

  Issue edited by Rickard

  Sorry to hear that you have problems with the WiFi and bluetooth

  I'm afraid this sounds like it may be a hardware problem in your phone, but I recommend that you first try to reinstall the phones using PC Companion software, but please note that this will reset your phone and delete all your data.

  If the question must remain, I think that this must be examined and fixed to a repair center. For more information on how to submit your phone for repair and where, please contact your local support team.

• WIFI and WWAN connected simultaneously

  I have a W510 and both WiFi and WWAN works but not at the same time. I tried to change the configuration several times but I do not operate at the same time. If I connect the WiFi when WWAN is running, the WWAN is disconnected. It's like WiFi replace the WWAN connection and internet connection turns of (IE WWAN). I use the printer WiFi connection and I don't want to turn/on the WWAN connection, whenever I want to print something.

  1. is WWAN and WiFi supposed to operate simultaneously?

  2. If so, what is the WWAN and WiFi configuration in 'Connections Acess'? (Could you please add a screenshot of the configuration)

  / Hans

  I tried with AC and it did not work. I then uninstalled AC and tried Ad - hoc only with win7 and I couldn't make it work. Then I discovered that Intel have a solution called Intel MyWiFi and after installation, it worked perfectly. The software allows the computer create a PAN and Wi - Fi devices can be connected as connect to a normal router. Of course the network works as long as my computer is running...

  / Hans

• Dell XPS 13 WiFi and internal speaker issue

  I had problems with 2 numbers, the WiFi and the speakers. Problems with these two areas come and go, but it's frustrating that I bought this laptop a few weeks ago!

  (1) WiFi

  I had problems with the laptop which the WiFi would disconnect after using it for some time, usually around one hour. The wifi icon would show as little access without internet access and turn off/on, airplane mode and all of the other methods described on these forums would not allow the laptop to connect or find my wifi network. Restart the computer would solve this problem. It's really frustrating so I exchanged for a new one on the Microsoft Store.

  With the new laptop exchanged, would pose the same exact wifi problems. Each device is connected to the network was not having connectivity problems and my router was working fine, every time the laptops first and second had problems of wifi. I then called Dell Support and I was instructed to install the drivers wifi and bluetooth on the Dell site, but the same problems with wifi can't access to internet limited/no and don't see the network would occur again in sleep mode-use it for awhile. I found a thread in which someone unchecked the box that says something in the sense of 'to disable the device _ to save energy' which I guess was a feature related to the wireless adapter. This seemed to fix the problem for about 2 weeks up until a few days ago when the problem would be reactivated.

  The wifi icon would go into the State limited with a legend no internet access and the tips airplane mode and turn off/on would not do anything. Enter the network and sharing Center once I disabled the adapter, I would try to right click and enable again, but the icon would stay as disabled little matter how many times I clicked on activate. Restarting the computer is the only way that the laptop seems to find the network. Everything is updated from this post.

  (2) speakers

  The second issue is the speakers. Everything works well except for the few times I used Cortana. When I click on the microphone icon to talk and Cortana talks back, there is a buzz as well as voice. Similarly, sometimes TI Cortana would say that it does not work and try again later.

  These questions are really frustrating (especially WiFi problems) and I really need help with these problems as Dell technicians to offshore I have met are very rigid and robot-like and they don't seem too useful otherwise than on the fundamental issues. I love this computer but if these problems keep occurring, according to me, it's better to return just as it is still within the 30 day period.

  I think I have solved the problem, finally using the solution proposed for downgrading to the driver 6.x (before it was disconnecting every few seconds, and now he held a super weak signal for awhile without turning off once).

  Ironically, I found the Broadcom driver available on the Lenovo site (it has been removed from the Dell site according to my previous post!) - here is a link for all tent play technician on behalf of Dell:

  support.Lenovo.com/.../ds103679

• Why my laptop detects only my neighbors wifi and not mine when it starts?

  I have a laptop Dell Inspiron N5050 and in recent months he has struggled to detect and connect to my wifi, but it can detect surrounding wifi. I had to wait five minutes before he actually found my wifi, but then it does not connect to it for another 2 minutes because of "a problem with the access point. Then after that it connects to the wifi and works very well. Sometimes it will detect and connect to my wifi after the laptop is turned on, but it takes 5 minutes for the laptop to actually connect to the wifi.  I need a permanent solution to this problem. I uninstalled and reinstalled my network card. I unplug and plug the router. I went to power management and unchecked "allow this computer to turn off device to save power." I changed my power supply with high performance options. I disabled my anti virus software. My wireless driver is updated. After doing all these things, my laptop still has a problem. The router works fine. My iphone, kindle and windows 8.1 Dell laptop my brother can connect to it.  What should I do?

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur either because of corrupt network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check the issue.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• using the wifi and edge in a single application

  Hello

  my application can connect to the internet using wifi or edge (with a proper access point or BES). It connects using HTTP. After sending the right framework, server keep me as connected as long as I sent it or all data read few seconds. now, a bug was found in my application (when using wifi) and after some time of analizing, I found the problem. in the case of wifi, I connect using wifi, but then I read/sent data using edge. I corrected which and add own variable - if set to '1' it means I'm in 'wifi' mode and everything is read/sent using «interface = wifi» And now my question:

  for http whenever I want to send/read something, I have to open and close the new http connection. This isn't like making aware that I open it and got a "tunnel" that I can use while it is open. here every time new http question. the problem in my application is that I sent "first image" using "interface = wifi" but later using edge as well as the data has not been received. But why is this? I can't use different types of connection for an application? I have average-it is not possible to send a portion of the data using "interface = wifi" but subsequently sent a different part of the data using edge?

  thx for all the comments,

  Greetings from sorts

  None