WIFI and WWAN connected simultaneously

Similar Questions

• HTTPS with Wifi and 3G connections

  Hello

  I have a code to open a connection https using Connector.open ().

  I check for the MDS coverage and, if not true to add deviceside = false to the URL I check for BIS support and add deviceside = false and ConnectionType = mds public, otherwise I check to support DIRECT and add deviceside = true.

  It was everything works very well if you use a SIM card with BB internet services activated. Even though it was not a mobile connection but Wifi available it would connect via Wifi (that I found on other forums it seems to manage it's "free").

  However, I got a problem when you use an Orange SIM card with no active internet service. Even if there is Wifi available it wouldn't connect. I then added '= wifi interface' and 'deviceside = true' for the URL and it connects via Wifi.

  This is my code

  if( _mdsSupport ) {
              name = name.concat( ";deviceside=false" );
          } else if( _bisSupport ) {
              name = name.concat( ";deviceside=false;ConnectionType=mds public" );
          } else if (_directSupport) {
              name = name.concat( ";deviceside=true" );
          }
          else {
              name = name.concat( ";interface=wifi;deviceside=true" );
          }
  
          return Connector.open( name, mode, timeouts );
  

  My problem is that when I use a SIM card with no internet service at all or with the 3G, they both return with _directSupport (IE. CoverageInfo.COVERAGE_DIRECT is enough) but then none of them will ever connect if I have the network of mobile telephony, Wifi, or both.

  With the SIM card with no internet service I expected to return CoverageInfo.NONE and try and connect via Wifi.

  With the SIM with 3G, I expected him to come back with CoverageInfo.DIRECT but it does not connect successfully.

  Please can someone help explain this? I tried it on a Curve 8900 and the Torch 9800.

  Thanks for any help.

  Hi Peter,.

  I managed to get all this work on Friday. Thanks for your other thread with information on making connections. Between your phone and the demo app he began finally to all the senses. Still do not know why this is all handled by the API!

  I have test to try, and then sign in using BES and BIS, then Wifi, WAP and finally direct TCP, but you're right that I have need information about AFN to define.

  Thanks again for your help. Your son has been invaluable.

• Poor wifi and Bluetooth connectivity after iOS 9.3.1

  9.3.1 IOS is installed on my iPhone 6 wifi in my house guard fall!

  My Bluetooth connectivity keeps cutting to work! So annoyin!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Satellite L650/1MC - WiFi and LAN connection keep dropping out

  In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.

  I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.

  I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.

  I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Any suggestions to fix this annoying would be welcome!

  > I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Have you tried to reboot the router?
  Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
  OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.

  However, you can check the WLan and LAN TCP/IP protocol settings.
  Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.

  Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.

• HP Envy 27 3 in 1netn: HP Envy 27 Wifi and Ethernet connections

  New HP Envy 27 and have now no end of problems in charge a constant connection or using Wifi or Ethernet.

  All my other hardware such as laptop, I phone etc work fine, number of calls to the Helpdesk but still no luck.

  anyone else having similar problems. Crashes for a brief moment, enough to cancel a download.

  Hello @Divanduin,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop computer is not able to connect to your wired or wireless network, and I'd be happy to help you in this case!

  To re - establish a coherent link between your computer and the network, I recommend later in this document on troubleshooting wireless network and Internet (Windows 8), as well as Troubleshooting Wired Home networks (Windows 8). This should help to run a diagnostic on your system using the network and Internet troubleshooting, as well as measures to maintain your system over the wireless network.

  In addition, I suggest also follows the steps below to ensure that your power management settings do not interfere with

  the connection to the network:

  1. open DEVICE MANAGER
  2. open the NETWORK CARDS
  3. right click on the WiFi adapter for the pc and left click on PROPERTIES
  4. click on POWER up.
  5. remove the check mark beside : ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
  6. click on OK
  7. close DEVICE MANAGER and test.

• Profile of Windows 8 wifi and WEP connectivity issues

  Windows 8 running a Lenovo X 201 and similar questions on Samsug Tablet XE700T1A-A04US

  Updated the latest drivers for WiFi driver for Intel for Windows cards 8 64 - version 15.05.3000.1496 on 26/10/2012

  I can't connect to the active WEB Wifi access Points (my iPad and Galaxy tablet can)

  Also

  I can see previous wifi connections in the register:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Network\DataUsage\Wlan

  But I can't find anyway through the user of Windows 8 interface to modify or delete these profiles.  Example, I have some of networks when I traveled in Europe and no longer need them.

  Example:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Network\DataUsage\Wlan\LLOYDHOTEL

  BTW, I don't want to just delete the entry in the registry without knowing if it's the right way to remove?

  I did use the netsh wlan show profiles command and those in the registry is not listed (see above), so no still no chance to remove them.

  Thank you

  A number of people have asked on various forums on setting up WEP on Windows 7 and Windows 8.

  The vast majority of the responses say that you cannot do and just talk about why you should not use WEP in the first place. The fact is that sometimes you have TO connect to a wireless network and it happens to be using WEP. It can be a wireless network at home of a friend, at school, or other places which do not own you. Or it can be your own wireless network and you just want to use it without the hassle of configuring your router and all your computers (again).

  YES, people, you CAN manually configure your desktop or laptop computer running Windows 7 or Windows 8 to work with a wireless network using WEP. And the good news is that it is very simple to do.

  You must manually configure a wireless profile. The process is very simple and painless.

  Go to start/Control Panel / Network and sharing Center
  Select "set up a new connection or network".
  Select "manually connect to a wireless network.
  Fill in "Network name" (this is the SSID)
  Select the type of 'security' (in drop-down list, select WEP or other type)
  Choose the "type of encryption" (choose in the drop-down list)
  Fill in "Security key" (for example 10 hex character or password)
  You can also check:
  Hide the characters (recommended)
  Start this connection automatically (recommended)
  Connect even if the network is not broadcasting (read the disclaimer)

  Once the profile has been set up, you should be able to automatically or manually connect to the wireless network using WEP.

  Tech Guru / Fr. Tom McGahee

• How can I transfer files CR2 compressed using wifi and camera Connect?

  Hello world.

  I use app camera connect and you can view my files very well. They are all taken as CR2. When I downloaded a (and finally discovered where he was), I found it's a jpg file, not a raw file.

  How to download a raw file? I see no mention of this in the app's settings. The option "Resize" just mentions that it is used only for jpg downloads.

  Also, it would be useful to have an option of the place where to download, but it's also critical to have the raw file.

  Thank you

  Ellie

  Answer is that it cannot. So this is the solution. Use a cable.

• Two internet connection on the same PC (WiFi and ethernet)

  I have windows 8.  I have two internet connections. A cable (wired) and another in the microwave (wifi).  Normally isn't a problem because desktop computers are on the cable connections and the TV, laptops and other toys are on wifi.

  But sometimes I want to use two connections on a PC, like download a large file and stream and watch the Broncos game at the same time. I want to use Ethernet as a main and did use WiFi when Ethernet is too busy. I can't understand how to do this.  Anyone know?

  Hi Gerard,.

  You can activate the Wifi and cable connected at the same time, but you can use the Internet from one of them. The computer will prefer the cable if the cable is connected.

  If both are capable of providing Internet access, computer will prefer the wired (Ethernet) network to access the Internet (and not use the Wifi network to access the Internet).

  The advantage of using two connections is to get Internet access without interruption when a connection does not work.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Portege 4000 conflict between WiFi and Bluetooth on Windows 2000

  I recently replaced XP with Win2000 on my Toshiba Portege 4000. I also downloaded the latest drivers from the Toshiba site, using pref to Win2000 and Portege 4000.

  When you start the Bluetooth Stack V4.00.30 he wiped out the wireless LAN feature. I know that it is not possible to use Bluetooth and wireless at the same time.

  However, it is a permanent disability. During the uninstallation of the Bluetooth stack V4.00.30, wireless comes back to life.
  Is there someone who has a fix to this problem?

  Thank you!

  Hello

  Just a question: can use you the FN + F8 key combination to switch between WiFi and BT connection?

  AFAIK it's between possible and turn on both devices at the same time. In this case, he's shown great caution with content to follow:

  Devices Bluetooth and WirelessLAN function in the same radio frequency range and may interfere with each other. If you use Bluetooth devices and WirelessLAN simultaneously, you can sometimes meet optimal network performance or even lose your network connection. In this case, always stop a Bluetooth connection or your WirelessLAN

  As I said using the FN + F8 key combination, you should be able to switch between WiFi and BT connection.

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• 5s iPhone cannot connect to wifi and not this update to the latest version of the software

  MY iPhone will not connect to wifi and it's also not giv me updat options.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!