my windows 7 is not defragment properly, the system files are 11% fragmented

Similar Questions

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• Windows xp does not start after the system restore

  Hi, a few days ago, I restored the system to my computer because it showed no hard disks that have been added to the computer. I had no problem before, so I restored the system to the same day. AGTER system restore, my computer would not start. Well, it's not to the point where I'm supposed to pick a user, but instead of a list of users, it shows 'windows xp' on a blue background. I turned the computer off tension and Trier to start in "safe mode", but it did not help. What should I do? Thank you.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Remove all external devices such as printers, USB and then try to start.

  Step 2:

  I suggest that you perform the installation of repair XP on your computer and check if that helps.

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Note: Make sure you have uninstalled the latest version of Internet Explorer if installed before to perform the repair facility.

  Reference:

  http://support.Microsoft.com/kb/917964

• Windows (Vista) can not start because the following file is missing or corrupt: < root windows > \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Saved attachments in Windows Mail do not appear in the actual file

  In Vista, using Windows Mail, attachments are saved to disk hard aren't really there.  It does not matter what type of file it is.  When you click on an attachment to a paperclip icon and navigate to the folder on the hard disk where you want to save the file, the file seems to save successfully.  But, when you go to this real folder through 'Computer', the file is not really there.  If you go back to the email and save it, it says that the file already exists (although looking at the file in a Windows Explorer window, it is not there).  If you save multiple attachments from Windows Mail to a folder, the record is displayed all files in this folder... but none are really there.  What is the problem here?

  My only guess is that some 3rd party program is screw things upwards.  You can check for antimalware, antispam, or antivirus software and see if that might be the problem (seewww.oehelp.com/OETips.aspx#3).  In OE, we suggest set you up a new identity, but it is not so easy in WinMail.  I guess you'll just to workaround it.  To ensure that the economy of attachment is selected under Tools | Options | Security also.
   
  Steve
   
  "Splear R" wrote in message News: 8ee250c9-c1b5-49e4-b360-8684c8a9f9de...

  We tried.  This is even if hidden files are marked to show or not.  It does not matter where you save the file in... it will not be displayed in a regular Windows Explorer window, or be seen by other software (for example, whether a file you want to import into a program).

  If you double-click the message to open it in its own window and drag the attachment to a Windows Explorer window, it save successfully and can be seen and used as usual.

• Download iso file of windows 7 does not give me the iso file. Help, please!

  so I bought windows 7 Home premium on discount for students. I received a confirmation email telling me to download either an EXE or ISO file. I decided to download iso, however, after I finished downloading and extracting the zip file, I got a folder (name X 15 65733) and inside does not contain an Iso file. Instead, it has a bunch of folders and files, one of them is called setup.exe. I click on the file setup.exe, which explain that the setup.exe is not a valid win32 application.

  so I can not upgrade my windows xp to windows 7 right now, let alone burn it to a dvd. can someone please? Thank you!

  The X 15 65733 file is the file .iso Windows 7 Home Premium image. You have to burn to a dvd as a bootable disk to install Windows 7.
  David

• Indexing Service Windows RT does not in with the added files.

  I have the Asus Vivo tab RT and I put all my libraries to save to the default SD card by creating a virtual hard disk on the SD card and have a special mount the reader at the start of the system.  I added this virtual hard disk for the indexing service to ensure that it gets indexed but when I add / deletes files of the libraries, they display not upward unless I rebuild the index later.  I have Windows 8 running on a desktop computer and these libraries are pointed on an external hard drive and it maintains almost instantly.  I tried to let the Tablet sit overnight after the addition of some files to see if it never catches up, but so far without success.  Is it the way it is supposed to work or is at - it something wrong with the indexing service?  Or is it because I'm using a VHD?  I can live with that for the moment, but if all goes well, there's a way to fix this or it is corrected by a software update in the future.

  You can try using a junction point instead of a montage of virtual hard disk.  I can't say this will absolutely work, but it's worth a try.

  This tutorial is off this topic, but it explains how a junction point:

  http://Skeene.NET/tech/sync-unmoveable-folders-to-SkyDrive/

• Windows Mail does not open Inbox, all other files are missing.

  When I open Windows mail, all records except local and Inbox are missing.

  The rest of the screen is empty except for a message:

  County of folder may not be displayed

  Windows Mail could not open this folder.

  Possible Casuses are:

  low disk space

  not enough memory

  After turning off my computer, defraggin computer to free up space to oup, I still got the same message.

  I went on my ipad and access the windows messaging it. I had three new messages that I could access. I raise 9 unsent messages in your Outbox (they never appear on my desktop version). I cleaned up the.

  restarted my computer desk - still no change.

  I use Windows Vista

  I tried to download the package of Windows 941090 update but it said I had a bad version. I double checked, I had the correct 32-bit version.

  So what can I try now?

  Thank you very much

  I did export and then used the other program you suggested to compact the database, and finally I could work on my mail.  I could even delete nearly 1000 emails in the deleted files folder. Before it would just give me an error message.

• Missing 0x8007001B file. Do not back up the system files?

  When I try to back up files, I get this code as a missing file. 0x5007001B. and the backup will fail. Wiki has a download of repair, but was not compatible with Vista.

  Hello VictorLeder,

  Thanks for the return of the response.  Please see the link below on the Microsoft TechNet Forums.  I suggest to try the steps of Ronnie Vernon first to see if this corrects the problem.  Please let us know status.

  Windows Vista backup and Restore Center: error 0 x 80070001 backup

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/9dc9f9b5-08ef-45F6-8a9f-caedfd3d37c8

• The script files are corrupted in vista on my computer laptop r61i

  Technical support of McAfee said that my scripts files are corrupted in vista on my computer r61i laptop... How can I download and replace on a preinstalled OS

  * original title - scripts to repair files in thinkpad r61i of vista preinstalled v

  Hello DonSchaffer,

  1 script are. what files you referring?

  2. What are the problems you are having with the computer?

  3. are you referring to the file damaged desktop system?

  Please give us more information about the files that you are talking about and the issues you have with the computer. If the system files are corrupted on the computer, I suggest that you run the tool on the computer system file checker. You can check the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Error-"Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly.

  Original title: Windows 7 critical updates

  A number of critical updates made automatically in the last two days.  He was stuck in a loop "failed to install...". "for hours.  I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours).  I tried to uninstall and it won't let me.  Now I get "Windows Installer Service could not be accessed.  This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ".  I need help!

  Windows restore points have never been of any property,

  Images of a completely separate hard drive system would be easy to undo this question

  It's so time spent to create system images before downloading and installing windows updates

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

  If you need to reinstall windows

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Windows Explorer does not work properly and hold all the time

  I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.

  Thank you for your time and enjoy your time.

  .

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.