My Windows 7 laptop will not be the same aknowlage that Halo 2 for vista is in disc tray

Similar Questions

• Uploaded image of Windows 7 Professional will not accept the product key that came with my computer.

  I have a Dell laptop, Studio, approximately 1 year, delivered with Windows 7 Professional installed - the label with the genuine product key is located at the bottom of the laptop. Shortly after I got it I deleted the recovery partition to make room for Linux installed next to Windows. I had problems with Windows system (mainly caused by me bad installation software and drivers without proper backups) so I decided to reinstall Windows. I had already deleted the recovery partition and wouldn't use it anyway because I prefer a clean system without unwanted from the manufacturer in this regard. I did not receive a Windows operating system installation DVD with my computer, so I downloaded a (64-bit Windows 7 Professional, the same as the original operating system) which already had SP1 on it (the version of Win7Pro installed Dell's not SP1). I installed Windows on this drive and attempted to activate using the product key that came with my computer, but it would not accept the key. I don't have time to try to solve this problem, but now the period of one month is up and my computer does not work correctly.
  I suspect that the problem may be due to me using the SP1 disc. If this is the case, should I reinstall Windows again? I have * NOT * GOING to buy another product key when I have already paid for a genuine version of Windows. I just want to be able to use my computer without the ridiculous slowdowns caused by pre-installed software and the way I chose.

  Thanks for any help with this problem, I really need fo fix my computer.

  original title: Activation error, Windows 7 Professional
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  Windows license Type: OEM SLP

  The key to your report is your OEM SLP key which can not be activated. This isn't the key to COA.

  but the key I tried to use is what I copied on the COA the day I got the computer of the book where I put all the information on my computers.
  
  
  Is the product key in your book is the partial key in your report?
  You must change the product key to the one on your COA.
  Check your compartment of the COA.
  The other solution is to reinstall your Dell OEM recovery disks or recovery partition. This self will activate your computer.
  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• laptop will not print, the problem is PRINTUI. Missing DLL

  Hello. My computer Windows XP laptop will not print, and I found that the problem is PRINTUI. DLL is missing. I have a backup file on my hard drive, but I don't know which folder the file goes to. I have Windows XP Home edition SP2. Does anyone know the correct folder, that this file will?

  Hi, Jtmcc,

  Adding printers without interaction from the user in Windows

  http://support.Microsoft.com/kb/189105

  Is the common path: C:\ System32\ printui.dll WINDOWS\

  What is printui.dll?

  http://DLL.ParetoLogic.com/detail.php/printui

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• Window Media Center will not configure my Xbox says that there is an error in moan by train

  Window Media Center will not configure my Xbox says that there is an error in moan by train

  Hello

  What is you get the exact error message?

  Please follow the steps mentioned in the links below.

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

  http://support.Microsoft.com/kb/916180

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

• I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshoppowers upward but then gets off by Win

  Question? I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshop turns on but gets so turned off by Windows 10. V. frustrating - what can I do?

  What version of Photoshop? have you tried to do a right-click on the icon and selecting run as administrator

• ? Adobe digital editions4.5:check:activation error; Book downloaded from kobo creates a link url of ASMC. try to open it in dig.edit. results in the activation error; List IDS allowed adobe to dig. Edit shows the same email that you used for download Kobo

  ? Adobe digital editions4.5:check:activation error; Book downloaded from kobo creates a link url of ASMC. try to open it in dig.edit. results in the activation error; List IDS allowed adobe to dig. Edit shows the same email that you used for download Kobo.

  The operating system that you used?

• My laptop will not past the original windows start up of page.

  I turn it on and it sits just continually in the setup of the page where it maintains that start up.

  Hi ErinBaxter,
   
  -Are you talking to the login screen when you say "windows start page? Please confirm the same.
  -Have you been able to start without any problems before?
  -Remember to make changes to your computer between the calendar when things worked fine and now?

  Try to start your computer in Mode safe mode and check if Windows loads successfully.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  A description of the options to start in Windows XP Mode

  Keep me updated on the status of the issue.

• Windows Media Player will not play the .tivo files

  WMP 11 will not play the .tivo files.

  WMP 11 will not play the .tivo files.

  Find out if the next thread helps you: -.

  Windows Media Player cannot play the file

• Windows Media Player will not play the .mp4 files after installation IE10 - BEX error message

  Hello! Recently, when I tried to read a file .mp4 on Windows Media Player, the player would immediately stop working and tell me that he could not play this type of file, even if the day before he could do so without any problem. I had an option to close the program or click to more information, so when I clicked for more information, he gave me this:
  Signature of the problem:
  Problem event name: BEX
  Application name: wmplayer.exe
  Application version: 12.0.7601.17514
  Application timestamp: 4ce7a485
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 00000000
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789
  Back to a system restore point previous fixed the problem and I could again play the files in Media Player, but during the night that Windows updates installed and the morning I could not play these .mp4 files once more. So I restored to a point earlier, changed my updates so that they are is more automatic and by installing each day at a time, I finally isolated the problem in Internet Explorer 10. If I install that, just Windows Media Player will not play these files.
  I tried a manual update of Internet Explorer 10, turn off all the options of toolbars shit and everything, thinking that when it automatically installs those who may be included, but that has not helped. Had to go back to my previous IE10 restore point. So no matter what, Internet Explorer 10 kills my ability to play .mp4 on Windows Media Player files.
  I don't have toolbars running on IE9 at all.
  I know that's obvious answer is 'do not install Internet Explorer 10' or if I do, download another player for .mp4 files. But the fact is, it shouldn't happen, it is indicative of something being wrong, and I would like TO be able to install Internet Explorer 10 AND use Windows Media Player to play these files. If someone else has had this problem, or know a way to fix it?
  Here are my system specs:
  Windows 7 Ultimate 64 bit
  Intel Core i5 - 3350P @ 3.10 GHz CPU
  ASRock H77M LGA 1155 motherboard
  8 GB DDR3 240 - Pin SD RAM
  Diamond Radeon HD 7870PE52GV 7870 GHz video card
  And all my programs are installed on this:
  SAMSUNG series Pro 840 MZ-7PD256BW 2.5 "256GB SATA III MLC internal Solid State Drive
  I'd appreciate any help you can provide! Thank you!!

  See http://support.microsoft.com/kb/2670838

   

  It sounds like your question. I think you should uninstall this update and

  hide and see if that solves your problem. Please report.

   

   

  Barb

   

  MVP - Windows/entertainment and connected home

   

  http://digitalmediaphile.com/

   

  Please mark as answer if that answers your question

   

   

   

   

  I tried myself after experiencing the same problem and error code. I uninstalled the KB2670838 update, and then my Windows Media Player finally worked again. I also found that IE 10 must be uninstalled as well. Installation of IE 10 also automatically installs the update of KB2670838 platform. After uninstalling KB2670838, IE 10 automatically uninstall with it, better you hide two updates so that they do not install again. From the link in the previous post, I learned that the platform update is having problems of conflict with the AMD drivers. Good luck to you and hope this helps.

• My wife can not enter his hotmail or windows sound live. This is the same password that can she do?

  My wife can not enter his hotmail or windows sound live. It's the same password, what can do?

  http://.login.live.com enter the email address and choose a password!

• Pavilion dv6 - 6153cl laptop - will not install the video drivers.

  Recently, a friends Pavillion dv6 - 6153cl laptop started bluescreens frequent (many x 50 on igdpmd64.sys).   (on Win7 64 bit, completely up to date)

  I came across this site and downloaded the current drivers but try as I can, they will not install. The message implies that they are bad drivers, but I have confirmed that they are the 2 parters - driver package AMD, including ATI and Intel drivers for the video "switchable". Most of the AMD install - except the 2 pilots and the C++ package components. AMD checks prior approval from hardware to install and does not renounce it.

  The error is:

  "this computer does not meet the minimum requirements for installing this software.
  or it just keeps trying to install it until it skips this step and goes to the next component, which gives the error the failure at the end.

  I searched this site and found a number of references to similar problems. I've updated the BIOS, all other drivers, removed the old drivers (it is now running on Win VGA drivers), updated part of HP software, run a repair on Windows update and Installer, tried the previous version available, uninstalled C++, cancelled prior unpacking, checked Mode drivers safe, ran HP Support Assistant and tried to manually launch the installation program in compatibility mode admin.

  Windows Update also wanted to update the 2 drivers but who do not. Twice. He will probably try again.

  I ran sfc and Auditor - alls well with the other drivers.

  There is no obvious change that percipitated the question.

  The WinUpdate KB2670838 that sometimes causes a similar error has not been installed.

  The system works at normal temperatures. And it stopped crashing. But only 600 x screen resolution.

  Any suggestions on how to get the drivers to install?

  My friend decided to hold the laptop store as they needed more functional. Of course, they were able to update the video drivers well obviously had a problem with an obscure audio problem. (audio drivers have been included in the package of video driver HP that they perhaps do not use) All is now well and unfortunately I cannot report on what drivers, they used to solve the problem. Thanks for your help, Zak

• Windows Live Mail will not accept the password

  I was happily using Windows Live Mail to get my emails to icloud.

  However, all of a sudden he repeat the authentication has failed. I've tried everything. Change the password, delete the account and he seized again.alw

  Nothing works. It will be not also authenticate with Windows Mail Windows 10.

  I'm having the same problem with the Windows Web Mail application - I think it has something to do with the new process to double check but it is quite an assumption

• HP Envy m7-k211dx: laptop will not read the charger

  My charger started acting funny the other day my computer laptop would not load that I plugged my charger into the port, it does not seem to meet that he is in charge, I thought maybe it was the charger. My mother went bought a charger from Walmart (not the same charger company), it seemed to work, he charges the day after the day it was fully charged, I used it all day until my battery was about to die, I got the notification saying 12% going to charge your laptop, so I plugged it. It seemed to work but there was a yellow sign on the battery icon was not supported but I kept the laptop that is until I have taken as a charger when it just turned off. He died now when I try to put on I see white, flashing lights, so I don't think it's a battery problem, I just can't load, when I plug the Chargers none of them seemed to work. There is usually a flashing orange indicating that my laptop is supported, it does not show that when I plug the charger in, now my phone is dead and I can't activate it please I need help. side note: I've tried and tried everything and no my port of loading is not loose when I plug, please help someone

  Hi @Clovis713,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that your notebook does not start on battery or AC adapter / CC. Have you tried to remove the battery and the only power of the AC adapter?

  Also, here's a document can help: HP Notebook PC - computer won't start (Windows 10)

  I would like to know whether the measures of assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards