my windows box works only in normal mode, cannot run in safe mode.

Similar Questions

• Why some games and other programs need to be "run as Administrator" mode in 7RC which worked fine in normal mode on 7 beta and vista?

  Why some games and other programs must be run in Admin mode in 7RC which worked fine in normal mode on 7 beta and vista?

  An example of this is the game Guild Wars (www.guildwars.com). I had problems with this with random programs.

  cbello57,
  Run as administrator may be required for some games and programs because they have a permission structure different in Vista in Windows 7 (Windows 7 and Vista are different in how to manage certain permissions).

  I suggest test you installation of the game in the program by clicking on the Setup file by clicking on "Run as administrator".

  This will sometimes solve this kind of situation because it installed the program in a State of high permission.

  This output from test and let us know your results Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• Cannot open Windows asking for installation in normal mode only in safe mode.

  Unable to start Windows in normal mode.  The need to re-activate the computer in safe mode.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Internet Explorer will work only in administrator mode

  Original Title: Internet Explorer 8, Windows Vista Home Premium sp2

  Internet Explorer runs only in administrator mode.  When I right click on the shortcut on the desktop or go to programs to load it, it loads then immediately stops working and freezes.  What can I do to fix this?

  Internet Explorer runs only in administrator mode.  When I right click on the shortcut on the desktop or go to programs to load it, it loads then immediately stops working and freezes.  What can I do to fix this?

  Suggestions...
  1. first check if your IE8 has all the defects.
  Start > default of programs > Set Your Default programs > column to the left, click Internet Explorer. He said 'this program has all its default value'?
  If not, click on choose by default for this program > check mark on each entry in the list > click Save.

  2 use this Microsoft Support Fix It application.
  http://support.Microsoft.com/GP/ie_freezes_or_crashes/en-us?EntryPoint=lightbox

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My program works only in debug mode

  Dear all,

  I'm just starting to use LabVIEW and develop a pilot thing.

  The program is rather in order because I only used to work with text-based program.

  The current program works without any error message from debug mode.

  To give an idea of how it is made:

  1. configure the serial port settings (address of the machine, baud rate, parity, etc.)

  2. send to the instument the name of a short to run program.

  3 send commands of mutiple string instruments.  These channel commands build a short program to control the instrument.

  4 send another command string to run the short program

  The problem is that it does not work in enforcement mode.  It seems to me that the communication between the device and the computer seems to be too fast.

  Given that the program is designed in a sequential manner, not have a loop while or do loop so I can not add any timing function.

  Could someone give me a tip or a good direction for this problem?  It would be really appreciated.  Thank you.

  You could do something like the amendment attached. Note how I modified the component of connector for the Subvi in the classic 4-2-2-4 operating mode and notice where I connected the terminals.

  NOTE: I guess that the VI is supposed to work only once, and that you do not use the continuous run button in the toolbar. You're not, are you?

• WSUS 3.0 SP2 and Windows 7 works only together... "unpublished".

  good then it gives me a bit of a nightmare.

  I have a 2008 r2 with WSUS 3.0 box setup; my vista and xp clients connect with happiness and go about their business update.

  All Windows 7 clients in the Organization have failed. It comes to systems running the same SOE but also covers systems running manual install of Windows 7, this verisons them Professional and windows 7 32 bit Enterprise.

  So it is a big business problem. I first tried all the traditional methods, such as installing manually windows update version 7.4.7600.226 agent on my clients windows 7, I simply get an error message stating "Setup of the Windows Update Agent met with a fatal error.

  I tried to rename c:\Windows\SoftwareDistribution folder, then restart the service of wu. Honestly, I think that this issue is also that as the number of computers, it's also affecting.

  I also tried to manually replace all files windows agent update 7.4.7600.226 on a windows 7 the problem with system. If I look at the WSUS console, he gets the change of 7.3.7600.16385 to 7.4.7600.226 version but it is not help me solve the problem. If I look in my WSUS console I see all XP/VISTA machines are running 7.4.7600.226 and they work perfectly. Windows7 machines ALL running 7.3.7600.16385 and all fail with '8008005' and showing the same problems in windowsupdate.log

  On windows 7 clients if I try manually pushing an update, I get the error code ' 8008005' and in the WSUS console, he continues to show yet to be reported.»

  I have included a summary of a file windowsupdate.log among machines of affect.

  ------------

  2010-07-07 10:04:18:862 900 b60 Misc = logging initialized (build: 7.3.7600.16385, tz: + 0930) =.
  2010-07-07 10:04:18:880 900 b60 Misc = process: C:\Windows\system32\svchost.exe
  2010-07-07 10:04:18:880 900 b60 Misc = Module: c:\windows\system32\wuaueng.dll
  2010-07-07 10:04:18:862 900 b60 Service *.
  2010-07-07 10:04:18:880 900 b60 Service * START * Service: Service startup
  2010-07-07 10:04:18:880 900 b60 Service *.
  2010-07-07 10:04:18:956 900 b60 Agent * WU client version 7.3.7600.16385
  2010-07-07 10:04:18:956 900 b60 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2010-07-07 10:04:18:957 900 b60 Agent * access type: no proxy
  2010-07-07 10:04:18:957 900 b60 Agent * network state: connected
  2010-07-07 10:05:04:111 900 CWERReporter::Init b60 successful report
  2010-07-07 10:05:04:112 900 b60 Agent * Agent: initialization of Windows Update Agent *.
  2010-07-07 10:05:04:112 900 b60 Agent * Agent: initialization of the global parameters cache *.
  2010-07-07 10:05:04:112 900 b60 Agent * WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:112 900 b60 Agent * state WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:112 900 b60 Agent * target group: (Unassigned Computers)
  2010-07-07 10:05:04:112 900 b60 Agent * Windows Update access disabled: No.
  2010-07-07 10:05:04:122 900 b60 DnldMgr Download manager restoring 0 downloads
  2010-07-07 10:05:04:123 900 b60 to THE # to THE: initialization of automatic updates.
  2010-07-07 10:05:04:124 900 b60 to THE timeout parameter next detection at 2010-07-07 00:35:04
  2010-07-07 10:05:04:124 900 b60 to THE # WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:124 900 b60 detection frequency to THE #: 22
  2010-07-07 10:05:04:124 900 b60 to # approval type: on demand (political)
  2010-07-07 10:05:04:124 900 b60 to THE # scheduled install date and time: every day at 17:00
  2010-07-07 10:05:04:124 900 b60 to THE # automatically install minor updates: Yes (user preference)
  2010-07-07 10:05:04:125 900 b60, the phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:04:553 900 b60 report * report: initialization of static data to report *.
  2010-07-07 10:05:04:553 900 b60 report * OS Version = 6.1.7600.0.0.65792
  2010-07-07 10:05:04:553 900 b60 report * OS Product Type = 0 x 00000004
  2010-07-07 10:05:04:590 900 b60 report * computer brand = Gigabyte Technology Co., Ltd..
  2010-07-07 10:05:04:590 900 b60 report * computer model = G31M-ES2C
  2010-07-07 10:05:04:595 900 b60 report * Bios revision = CF
  2010-07-07 10:05:04:595 900 b60 report * name of Bios = BIOS Award Modular v6.00PG
  2010-07-07 10:05:04:595 900 b60 report * the Bios Release Date = 2009-07 - 02 T 00: 00:00
  2010-07-07 10:05:04:595 900 b60 report * locale ID = 3081
  2010-07-07 10:05:04:741 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:741 900 b60 to THE initialization feature updates
  2010-07-07 10:05:04:741 900 b60 to THE Found set 0 cached updates featured
  2010-07-07 10:05:04:742 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:742 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:742 900 b60 to THE delayed finish to initialize
  2010-07-07 10:05:04:743 900 b60 to THE #.
  2010-07-07 10:05:04:743 900 b60 to THE # START # to THE: research updates
  2010-07-07 10:05:04:743 900 b60 to THE #.
  2010-07-07 10:05:04:798 900 AU b60<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2010-07-07 10:05:04:798 900 d94 Agent *.
  2010-07-07 10:05:04:798 900 d94 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:798 900 d94 Agent *.
  2010-07-07 10:05:04:798 900 d94 Agent * Online = No; Ignore download priority = No
  2010-07-07 10:05:04:798 900 d94 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-07-07 10:05:04:798 900 d94 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
  2010-07-07 10:05:04:798 900 d94 Agent * Search Scope = {Machine}
  2010-07-07 10:05:04:890 900 d94 Agent * found 0 updates day and 0 categories in the search. rules of RCT evaluated 0 out of 0 deployed entities
  2010-07-07 10:05:04:892 900 d94 Agent *.
  2010-07-07 10:05:04:892 900 d94 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:892 900 d94 Agent *.
  2010-07-07 10:05:04:892 900 AU d98 > # RETURN # to THE: research updates [CallId = {A8468B2E-C141-44E3-9D88-17395E6367F8}]
  2010-07-07 10:05:04:892 900 d98 at # 0 updates detected
  2010-07-07 10:05:04:892 900 d98 with THE #.
  2010-07-07 10:05:04:892 900 d98 to # END # in THE: research updates [CallId = {A8468B2E-C141-44E3-9D88-17395E6367F8}]
  2010-07-07 10:05:04:892 900 d98 with THE #.
  2010-07-07 10:05:04:892 900 d98-notifications to THE present is disabled.
  2010-07-07 10:05:04:892 900 d98 phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:04:892 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:893 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:893 900 b60 to THE #.
  2010-07-07 10:05:04:893 900 b60 to THE # START # to THE: research updates
  2010-07-07 10:05:04:893 900 b60 to THE #.
  2010-07-07 10:05:04:894 900 AU b60<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2010-07-07 10:05:04:894 900 d94 Agent *.
  2010-07-07 10:05:04:894 900 d94 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:894 900 d94 Agent *.
  2010-07-07 10:05:04:894 900 d94 Agent * Online = Yes; Ignore download priority = No
  2010-07-07 10:05:04:894 900 d94 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-07-07 10:05:04:894 900 d94 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
  2010-07-07 10:05:04:894 900 d94 Agent * Search Scope = {Machine}
  2010-07-07 10:05:04:894 900 d94 Setup looking for agent SelfUpdate
  2010-07-07 10:05:04:895 900 d94 configuration version Client: Core: 7.3.7600.16385 to the: 7.3.7600.16385
  2010-07-07 10:05:04:904 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2010-07-07 10:05:04:940 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:198 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2010-07-07 10:05:07:202 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:240 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2010-07-07 10:05:07:260 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:269 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2010-07-07 10:05:07:273 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:372 900 d94 Setup determine whether a new configuration manager should be downloaded
  2010-07-07 10:05:07:372 900 d94 Setup Manager SelfUpdate is not found.  It will be downloaded
  2010-07-07 10:05:07:372 900 d94 Setup assessment applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226;
  2010-07-07 10:05:37:646 900 d94 installation caveat: Cbs StartSession, error = 0 x 80080005
  2010-07-07 10:05:37:646 900 d94 Setup FATAL: assessment of the applicability for installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 ' has failed, error = 0 x 80080005
  2010-07-07 10:05:37:646 900 d94 Setup FATAL: SelfUpdate check failed, err = 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent * WARNING: jump scan, self-update check returned 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent * WARNING: exit code = 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent *.
  2010-07-07 10:05:37:647 900 d94 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:37:647 900 d94 Agent *.
  2010-07-07 10:05:37:647 900 d94 Agent WARNING: customer WU didn't search for the update with error 0 x 80080005
  2010-07-07 10:05:37:647 900 AU d98 > # RETURN # to THE: research updates [CallId = {0A71D3FE-B9BC-4B73-B7A2-AC3787D8D9E4}]
  2010-07-07 10:05:37:647 900 d94 report REPORT EVENT: 10:05:04:742 2010-07-07 + 0930 1 202 102 {1E3A0E26-9FB7-42F0-8DA5-99C3D5CCC453} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates content success installation reboot completed.
  2010-07-07 10:05:37:647 900 d98 to # WARNING: reminder of search failed, result = 0 x 80080005
  2010-07-07 10:05:37:647 900 d98 to # WARNING: could not find updates with error code 80080005
  2010-07-07 10:05:37:647 900 d98 with THE #.
  2010-07-07 10:05:37:647 900 d98 to # END # in THE: research updates [CallId = {0A71D3FE-B9BC-4B73-B7A2-AC3787D8D9E4}]
  2010-07-07 10:05:37:647 900 d98 with THE #.
  2010-07-07 10:05:37:647 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:647 900 d98 with THE timeout parameter next detection at 2010-07-07 05:35:37
  2010-07-07 10:05:37:647 900 d98 phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:37:648 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:648 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:670 900 d94 report CWERReporter finish event management. (00000000)
  2010-07-07 10:05:42:629 900 d94 report REPORT EVENT: 10:05:37:646 2010-07-07 + 0930 1 148 101 {A4993B4F-7329-405D-8435-093B74B867B1} {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate software failure synchronization Client Windows Update not found with error 0 x 80080005.
  2010-07-07 10:05:42:672 900 d94 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2010-07-07 10:05:42:672 900 d94 WER sent report: 7.3.7600.16385 61CA813A-7585-442E-A66B-B0D15CE6BDC0 0 x 80080005 Scan managed 101
  2010-07-07 10:05:42:672 900 d94 report CWERReporter finish event management. (00000000)

  ------

  any suggestions or advice would be so greatly appreciated...

  Thank you all

  Right Church wrong Pew.

  Specific WSUS Forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 works only with canon MX 340

  Canon MX 340 printer works only with windows 7.

  Canon MX 340 printer works only with windows 7.

  You mean the Canon PIXMA MX340?

  You have the following drivers installed? :
  http://www.USA.Canon.com/nw3s/CanonUSA/DownloadContents/English/0100461601EN.htm
  (As of 10/23/12)

• Explorer Windows stopped working, and it wont let me run cmd as administrator.

  A few months ago, I got the error message "Windows Explorer has stopped working". He asks if I want such online for a solution, or close the program. I looked online and everyone says to run cmd as administrator, and then type Sfc/scannow, but when I right click on cmd after a search on the start menu, it says that it has stopped working again. I also tried to run cmd as an admin using Crlt-shirt-entry, but he always says that it has stopped working. I use Windows Vista Home Basic 32-bit.

  Hello

  Use the Safe Mode if necessary - repeatedly, press F8 that you start.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Windows does not start in normal mode after the Trend Micro update a few days ago. I can only work in safe mode. Whenever it freezes in normal mode just after typing my password. Help, please.

  Trend Micro update

  If the information below does not help, contact Trend Micro because it is their product that caused the problem:

  http://eSupport.trendmicro.com/default.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• NICs not appearing only in normal mode and wireless not work not (witness still on orange)

  Hello all and thanks to anyone who responds! I'm pretty clueless when it comes to computers, so I hope it's just something simple.

  I am running Windows Vista Home Premium with a Presario F700. The processor is AMD Athlon X 2, processor Dual-Core TK - 55 1.80 GHz. 958 MB RAM and 32 - bit operating System.I don't know if you need this information but better safe than sorry. OK for the problem.

  The computer is supposed to be wireless, but I cannot make it work. When I go to Device Manager in a single Normal boot device shows. It is said: NVIDIA nForce 10/100 Mbps Ethernet #2. I'm not sure what that means, but he says that this device does not work correctly. I couldn't HP Wireless Assistant to work so I followed some advice that I've seen an uninstalled but that did not help at all. I'm sure that's not my firewall is disabled. And I use Norton Security, but I don't know which is not affecting him either since it was a problem before I installed Norton.

  Also, if I boot mode safe more things highlighted in Device Manager. For example, it shows these: card 6TO4, isatap.hsd1.fl.comcast.net, NVIDIA nForce 10 / 100 Mbps ethernet #2 miniport (IP) wide AREA network, wide area network (IPv6) WAN miniport, miniport Wan WAN (L2TP), miniport WAN (PPPOE), miniport Wan WAN (PPTP). But only in Safe Mode. Even if I try Boot Mode safe mode w / Networking they always disappear and it's the only one. I have tried everything I know how to do but I'm at a loss as to what prevents it from loading the Normal start.

  On a side note, someone said to make sure that the adapter is enabled in the BIOS and I checked and the only thing remotely sounding like a NIC is enabled. He wasn't that anything listed in the order of boot on an adapter until recently, and it's at the bottom of the list with an exclamation mark next to it. However, the exclamation point is now gone, but NIC is always at the end of the list. I also ran the check disk thing, and he came back fine. I ran a full scan of the system without any problems but a few tracking cookies. I tried to uninstall in safe mode and start back to normal to leave the computer to reinstall without success. I also used the option reset back to the factory. While time consuming which did not help either.

  If anyone has any ideas as to what I can I would be very happy. I'm hoping to give this computer to my brother as a Christmas gift. Sorry for the long post but I wanted to make sure I was as complete as possible to save everyone time. Thanks again. And if I missed any information please let me know and I'll fix it.

  If reset you to factory, it should work.  It is a switch broken (I don't him think) a motherboard problem or probable internal problems with the wireless. Take it to a store because it is a common problem with these computers.

• My Windows 7 works only in a safe mode. What can I do?

  When I start my computer, the office looks like as usual. However, I can't start any program. When I double click on ANY icon (including the START BUTTON), the circle of rotation it shows... and it runs forever. However, in safe mode, everything works fine.

  I followed the instructions on How to perform the boot in windows , but it did not help. So that means that this issue is not caused by application or start service interference.

  I tried to restore, but it has not all possible restore points. What can I do?

  Here is the link to the system information file

  Please help me

  UPDATE

  When I connect under a different name (guest), everything works normally.

  Alex

  Lets start with the latter, and we will work through to see if we can get this resolved.

  09/07/2014 02:13 application Error failed application name: TeamViewer.exe, version: 9.0.29947.0, time stamp: 0x53b3d3c5
  Name of the failed module: LvHook.dll_unloaded, version: 0.0.0.0, time stamp: 0x4ddd846b
  Exception code: 0xc0000005
  Offset: 0x3aa645da
  ID of the process failed: 0x13ac
  Start time of application vulnerabilities: 0x01cf9b1b4e6f71fa
  The failing application path: C:\Program Files (x 86) \ \Version9\TeamViewer.exeTeamViewer
  Path of the failing module: LvHook.dll
  Report ID: 8c82bf14-070e-11e4-8f08-e89a8f766234

  dtsoftbus01 virtual DAEMON Tools c:\windows\system32\drivers\dtsoftbus01.sys Bus driver

  dtsoftbus01.sys
  Driver Description: Daemon Tools driver
  BSOD in Win7 problems

  Remove the Viewer from the team.

  Delete Hotspotsheild (don't know cause of BSOD)

  Completely remove SuperAntispyware (temporarily) and install Microsoft security Essentials.

  Click Start, type "msconfig" under the tab "Général" brand safe "Normal startup" is selected. Click the "Boot" tab and make sure "Safeboot" is disabled. Click 'Apply' and 'OK'. Restart your computer.

  To be able to diagnose what might be causing your crash of the system, we must dump files.

  Please refer to the link below to get the procedure recover, zip and upload them to the site as onedrive, file sharing google "dropbox, etc.".

  When you are finished, make public the folder and share the link here.

  Blue Screen of Death (BSOD) created by ZigZag3143 (MS - MVP)
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

• Window.onbeforeunload works only when there is a return value

  The problem statement is want to run code only on browser close, refreshing the browser tab, tab close.

  Previous version of firefox used to run the code in window.onbeforeunload in all 3 events mentioned above, but now the code in window.onbeforeunload runs not on click Refresh and browser close.

  based on the discussion with the previous post, I kept back in this block. Now I am able to see the confirmation box. But now I want to execute the code only when clicked on leave of this page.can you please help on this. Thank you very much.

  An additional point is if I keep the code in the window.onunload code is not executed in the tab close and the browser, but it runs in the update on.

  Hi, I admire your persistence on this issue, but there is a bug that has the attachment that Gingerbread man named titled: "Bug 391834 - do not allow alert/confirm/prompt onbeforeunload and onunload onpagehide.

  It looks like its guests with disabilities and you try to make it work. But you also already solved this problem with a batch file in this issue https://support.mozilla.org/en-US/que.../993972?esab=a & s = & r = 0 & as = s so I this will mark as resolved.

• Halo 2 for Windows Vista works only on Windows 7

  Recently, I had to replace my laptop and got a version of windows 7. I am trying to run Halo 2 for Windows Vista and you try to run the compatibility for her program, but it still does not. Is it possible to get this game to work with Windows 7? I tried to run it as a Vista program, but it still does not.  This laptop capabilities go beyond the requirements of game system.

  Hello

  You're talking about Microsoft Halo: Combat Evolved.If it's the same thing that you are referring to, its compatible with Windows 7, you don't have to install or use it in compatibility mode.

  See if you get an error such as that of the article when you play the game and then continue with the steps in there.

  http://support.Microsoft.com/kb/941208

  If the installation is your concern, then let us know what happens when you do.

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Windows Search works only not XP

  Search for Windows - windows search button does not work, research and execute check boxes have disappeared from my Start menu options - how can I get them back

  Click Start, right-click on an empty space in the start menu and click Properties, click Customize, click Advanced, scroll to the bottom and put a check mark in the command run and search boxes, click OK. If the controls are already in the boxes or research still does not work after turning the audits after return.