Cannot open Windows asking for installation in normal mode only in safe mode.

Similar Questions

• cannot open and ask for the latest version.

  try to open a pdf file, but it requires upgrading to the latest version.

  I have check for update and it shows the latest version

  It's actually the first time I've seen this message. I saw several people who have said that they are opened in Acrobat or Reader - even asked to check - and only a screenshot has finally confirmed that they were not similar symptoms. Sorry to doubt, but this has been universal.

  So, in this case, I think that we can simply believe the message. Your version of Acrobat is very old. I don't know what are the characteristics in a file PDF can give this message.

• Windows don't update also cannot access the websites for microsoft in normal mode.

  Original title: windows update doesn't

  I just reformated my computer and installed windows xp service pack 1 and my computer will not let me acsess any microsoft Web site unless in safe mode and my updater says I'm not connected to the internet when I use internet explore to navigate the case (except microsoft) I don't have any idea how to solve this

  Start all over again. Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and he said to me: not val

  I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.

  where will be the second serial number?

  Help me please.

  Thanks, Abe

  Hi,

  Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error

  Kind regards

  Sheena

• Cannot open the icon for MY COMPUTER

  I use Windows XP Home Edition and cannot open the icons for MY COMPUTER AND MY DOCUMENTS AND SOME SHORTCUTS

  Hello

  1 are. what icons you referring?
  2. what exactly happens when you try to open the icons or documents or shortcuts? If you get an error message and then, after return the exact error message.
  3 How long have you been faced with this problem?
  4. don't you make changes on the computer before this problem?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• Cannot open windows messaging because initialize junk filter MSOE. DLL could not be initialized

  Original title: initialize the MSOE junk e-mail filter. DLL could not be initialized

  cannot open windows mail

  Hi CyndiJackson,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Users have fixed similar problem by following the steps below:

  (a) click Start, type regedit in the search box

  (b) then go to this registry key

  (c) a HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

  (d) and right-click on it and choose export to back it up.

  (e) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  Hi lisafuller,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the serial number and model of the printer?

  4. what happens when you try to access that Windows update and Control Panel?

  5. do you have security software installed on the computer?

   

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Method 2

  If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Due to Windows update run the Windows Update troubleshooting, check if it helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Also check if you can access control panel from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.

• It seems that my xapauthenticodesip.dll is corrupt. Cannot open windows live photo gallery.

  Original title: xapauthenticodesip.dll

  It seems that my xapauthenticodesip.dll is corrupt. Cannot open windows live photo gallery.   How should I do?

  Hello

  The question you have posted is related to windows live photo gallery and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=20

• I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation

  I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation. She did not support on windows 7. isn't there a mechanism to make as the support of windows 8?

  Original title: not to support the pilot

  Hello

  Don't forget to check with the help of the manufacturer of the device as their may be a newer version, if necessary
  still in beta.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little

  Hi, I have adobe CC for teams, a member of the team has problems, opening indesign, asked for a serial number, ive checked on our admin account and it is one our our registrants 'members '. I was not the person who created this original so I'm a little lost, I can't seem to find the serial numbers on my account and it seems like we don't have the qualified products? can you help me?

  Hello

  We checked the details of your team, all seats are assigned correctly.

  Now, there are a few details that we need in a private Message so that I can help you properly.

  Name of the user:

  User email:

  In the meantime, try it out below mentioned links.

  • Creative Cloud applications ask for serial number
  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  [Note: the details we need is critical, make sure you send by private Message only.]

  Thank you

  Atul Saini

• cannot open the item for creating adobe 11 on my MacBook Pro? that I buy it from the App Store? Help, please

  cannot open the item for creating adobe 11 on my MacBook Pro? that I buy it from the App Store? Help, please

  its said that its currently not available

  I have so much work account on this program, please help

  Make sure that your computer meets the requirements for the software you have purchased.  If this isn't the case, you will need to see about getting a refund.

  If she does not meet requirements, you must talk to the seller your issue with the product that they have you sold.