my windows print function closes this window and give me and error__
When I try to print, tell an email. I click on print and clik ok when the printing Panel
appears. I get a message that windows closes the window and the error. But it don't
not to give reason for the error
Hi GlennleeMiller,
What is you receive the exact error message?
What is the number and model of the printer?
1. check if the printer can print a test page.
2. you can also run the fix it from the link below and check off the results: printing problems and printing errors:http://support.microsoft.com/gp/printing_problems
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Separated from this thread.
I tried both of them, didn't work... very angry about windows
Hello Kuang,
Thank you for writing back to us. I can understand that it might get frustrating if the computer does not work as expected.
I checked online and found potential fix for this problem is to refresh the computer, and then try to upgrade to Windows 8 Media Center package.
Refresh your PC reinstall Windows and keep your personal files and settings. Refresh your PC reinstall Windows and keep your personal files and settings.
Note:
Applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC. It is recommended that you back up all the important files on an external drive before performing the update.
Please click on the link provided below for more information on how to perform the update.
How to refresh, reset or restore your PC
To add features like the pack Pro or Media Center to Windows 8/8.1, please see the link below.
http://Windows.Microsoft.com/en-GB/Windows-8/feature-packs
Hope the helps of information provided. Do we know the State of the question, so that we can help you further.
-
Why my HP printer does not print gibberish when I try to print information from this forum?
Why my HP printer prints on gibberish when I try to print information from this forum and how do I fix this?
Hi there dafoster,
I recommend trying another web browser to print for beginners, that the issue could be the browser.
If this does not help, I would uninstall the printer driver and put it back.
Here are links to help with uninstalling: uninstalling the printer software
Reinstall: e-all-in-one printer, HP Photosmart 7525 drivers
Make sure that you restart your computer after uninstalling.
I hope this helps!
Take care
-
When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?
I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus. It is much more functional than the Microsoft Directory and I have never problem renaming of files. I am just amazed that so many people have this problem and Microsoft has not fixed.
-
When I used Windows 8 Developer Preview screenshot function worked fine. The screen flashed and saved my screenshots. I pushed the Windows and print screen key. Now that I've updated, I can no longer do this. I am of ideas what is wrong. Any help would be great!
P.S. - This is the account I want to use! So I thought to it. In the case of my laptop (HP HDX 16 t) I have to press FN + WINDOWS KEY + print SCREEN. If anyone has the same problem, they should try it.
-
FF 32.0.1. Move between the tabs that are already open, clicking on which I opened before forced to close and open in a new window, which is a real pain. It seems to happen when I have 4 or 5 tabs open, rather than 2 or 3.
Only, this happened last week, once reinstalled a clean Windows.
I searched and found a lot of people have problems with the new windows that open when they want just a new tab, but this seems to be on the opening of the fresh rather than return to already open tabs, so I can't find the same problem I describe.
This can happen if you drag a tab slightly downwards in the browser window by clicking.
Firefox has a feature called tabs
You can detach a tab in the current window and open in a new window by dragging a tab in the browser window.
You can also do this via the context menu of a tab: switch to the new window
You can drag the tab to the tab bar in the original window to cancel this detachment. -
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows will close the program and notify you if a solution is available"is the latest version of Skype 5.3... Initially it was working fine but now I'm not able to download same Skype server. the same error appears saying that windows cannot download server.
Hello
read this:
http://www.Skype.com/intl/en/welcomeback/
System update A small number of Skype clients have problems using Skype. For more about the system status and solutions, visit Skype Heartbeat.
Skype INTERNET phone service says a small percentage of its 170 million users have not not connect to its service, a problem that he is expected to be fixed with a software update.
Skype said on its Internet site the problem resulted from the corrupted data that affects computers using the operating systems Windows, Linux or Macintosh.
He has published a new version of Skype for Windows late Thursday to deal with the issue, said the company, which is based in the Luxembourg.
He has released a version for Mac.
Linux users have been told to delete a file manually.
Skype said people using its services on mobile phones, TVs or other appliances are not affected.
_________________________________________________________
If before is not the issue, repost in Skype forums
-
It's time to clean up and reorganize the My Documents folder. I think I can have subfolders duplicate in my main files listed in the Documents. I would like to print a list to find and delete these folders.
Any suggestion is appreciated!
Thank you
Dan
It is a forum for Windows 7 with tips on Windows 7.
Windows XP is different, these instructions will not apply.
You can open a command prompt in Windows XP, then use the CD controls to get the folder you want.
If you have installed the Windows XP command window open herePowerToy* then this can happen more quickly - to aid that allows to simply right-click on any folder & open a command already defined for this folder.
* There was also formerly a very convenient Explore of PowerToy here but that is no longer available from MS - you will find perhaps at cnet or another download site.
There is also a Windows XP forum.
-
How can I disable voice and a black square around red symbol 'close' this window?
After a power outage, annoying voice came telling me everything I do, that is, "MSN opening, closing of window, etc..» In addition, a black square now surrounds the red circle 'close' this window. Cannot turn off the other to turn to low volume.
You turn on VoiceOver Accessibility feature (System-> Speech Preferences; (fn) Cmd - F5)
-
My problem is with SKype - I can connect just fine without webcam vidoe - but every time that I conect with video call - I am disconnected without any reason
I tried to install the latest version of windows and Skype - check the status of my camera - it works and I was able to capture images.
I don't know what I can do
Please help - I live far from my family and it's the only way to communicate and see!
Thank you
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi rozhanna,
Try the steps mentioned in the link below and check if it works.
https://support.Skype.com/FAQ/FA1267/I-set-up-video-but-it-doesn-t-work-what-s-wrong;JSESSIONID=E310AA4573FA528DA93B9439C47A1799? FromPage = CategoryIt is also possible that some third party software installed on the computer are in conflict with the video call in Skype software.
You can check if it works very well in a clean boot state.To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click restart.If the previous step fails, you can try posting your question in the forums of Skype and check.
http://Forum.Skype.com/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.
My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.
Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.
I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.
But it's just a solution and not a solution.
Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.
Here is the step by step. Your printer must already be connected to your network (solid blue on printer).
Step 1: Make sure your printer uses a manual IP address
(1) to obtain the IP address of your printer:
- If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
- If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.
(2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)
Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.
(3) since the network tab or section, look for a manual IP address configuration.
(4) suggest an IP address or type in a new. I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.
5) click apply and close the web page of the printer.
Step 2: Make the print driver using the manual IP address of the printer
Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...
1) click on the ports tab.
(2) add the Port.
(3) click on after the first screen, and then click new port type.
(4) enter the IP address of the printer.
(5) next.
(6) select the new port.
7) click OK.
You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.
Step 3: Remove print devices and install a new one.
Need to do this to get the software back HP synchronized so you can scan.
(1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.
(2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).
(3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.
4) return to the printers and devices window and open the properties of the printer again for your printer icon.
5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.
(6) you have now two print devices in the window (again), but now everything should work.
These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.
-
Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!
Hello
It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us
Don't forget to restart your computer after you run it.
If this does not work, try to uninstall and reinstall the drivers for your printer.
If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)
I hope this helps!
Mithrandir
-
I need my documents in separate windows, and not in separate tabs. Is this possible?
I have the version 2015.010.20056 on Windows 7.
Just found a solution, just drag and drop the legs outside the first window, which creates a separate window.
But can I turn off the functionality of the tab?
Hi anderst94754010,
Please check with this step:-Acrobat > Edit. Preferences > General > in Basic tools uncheck the option for "documents open as tabs in the same window", and then click OK.
After that, close the reader app & then restart.
Kind regards
Christian
-
I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion. In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close. This message of the 2 line took almost an hour to type as I have no control on the touchpad.
Hello Kluggerjo,
Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.
I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems. This article will guide you in this process: reset the management system (SCM) controller on your Mac.
If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user
If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X
If you experience any problems or have any questions, please let us know. The entire community is here to help.
-Best regards
Maybe you are looking for
-
Hello I have an iPhone 6 and uses iOS 9.3.2,and I recently deleted all my pictures and videos to free up space, "Manage the storage" in still however said circles I 23.4 GB of photos/videos like iTunes when I connect my iPhone to my Mac. I deleted my
-
I checked in my control panel for firefox, it says I have firefox version 3.6.8
-
I have a Dell Inspiron 600 m. I need to remove ALL of the programs what arew associated with iTunes AND Quick time as iTunes program loads WILL NOT correctly... for the 10th time or starts by default in State thatI need to remove iTunes and reinstall
-
I received this error - 0 x 80070570 on my Windows 7 x 86 computer. It stops at 70%
-
When I turn on my PC, it loads to the top of the home screen with the blue bar movement showing its loading. But it has never passed this screen. I am able to load in all modes of security. What should I do to load in normal mode?