My wireles arthos stoped working adapter. Canoe conect wirelesly

Similar Questions

• Satellite L300 - 215 WLan adapt stoped working

  Hello

  My card wirless stoped working.
  Wireless light does not illuminate.
  Any body can help?

  Hello

  Are you able to turn on the WiFi network using FN + F8?

  You should also check the status of wlan card in Device Manager.
  Maybe the WLan driver must be reinstalled.

  Please check this!

• Bluetooth in satellite C660-10V has stoped working

  Hi, my bluetooth has stoped working for a week.

  Time I changed my internet modem rather USB adapter, I can't reactivate my bluetooth.
  On my screen is the message of our Lady: "interface power supply is cut off.
  Its imposible to turn it on, by the function key + F8 does not work 'Bluetooth Wizard.
  In a Deputy bluetooth option is shown 00:00:00:00:00:00 to address equipment.

  Please help me with this problem.
  Marcin

  When you use the key combination FN + F8 is BT option available or not?
  If so, what happen when you try to activate the BT?

  To be honest I don t understand what you did exactly.

• audio on pavilion dv7 notebook pc priduct # A6X02UA #ABA has stoped working after bios update

  Audio has stoped working

  Hello

  Try the following.

  Download the installer of IDT Audio relevant links below and save it in your downloads folder.

  IDT Audio Installer - Windows 7.

  IDT Audio Installer - Windows 8.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Internal mic has stoped working

  The internal mic on my computer laptop HP Pavilion touchsmart has stoped working.  Nobody can hear me on Skype and I can't make recordings on other programs, so I know its not only Skype.  How can I get that back?

  @ropro

  It is the newest audio driver custom for your combination of model and the operating system for laptop. You can download this (which will begin when you click on the link) and then uninstall your current driver, reboot the system, and then install the downloaded driver.

  Driver Audio of IDT high definition (HD)

  The link I gave you, for the resolution of the problems of micro there a difference?

• Speakers just stoped working on my Tecra 9000

  Any 1 can help me?
  My speakers just stoped working on my Tecra 9000 and I tried the update for the sound.
  My drivers are up 2 date. I tried all the fixes everything... Please help

  Hello

  What you connect the headphones?
  You hear something?

  Did you check if mute is not activated?

• Skype has stoped working error

  every time I start Skype after 3 seconds it come with one Skype has stoped working error and stops at Skype.

  Please help solve.

  Name of the failing application: Skype.exe, version: 7.6.0.105, time stamp: 0x559165ab
  The failed module name: ntdll.dll, version: 6.1.7601.18869, time stamp: 0 x 55636317
  Exception code: 0xc0000005

  DxDiag crashed into Direct3D:

  DxDiag previously: crashed to Direct3D (step 2). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  The problem with the installation of the driver ATI Mobility Radeon HD 5470. Reinstall this driver:

  https://www.Sony.co.UK/support/en/content/CNT-DWNL/PRD-comp/EP0000230054_5505/VPCEC2S0E

  Search other updates of the driver available too:

  https://www.Sony.co.UK/support/en/content/CNT-DWNL/VPCEC2S0E/list#OS1

  It may also be necessary to uninstall the applications of virtual video capture ManyCam and Dxtory.

• The touchpad scrolling has stoped working on satellite

  The touchpad scrolling has stoped working.
  I restarted / reinstalled the driver / reformatted hardrive 3 times (this works but the feature soon stop) / sytem restore / disabled firewall /?

  Can anyone help please it is really annoying me for the first time I'm having a problem with this machine that really gets to me.

  And what satellite you have? Is - this new model of notebook with touchpad buttons?

• Equium A60 freezes - driver graphics card has stoped working

  Hello everyone, my A60 keeps freezing and a message appears saying that the ATI driver has stoped working properly it causes the screen to go really big and have a very low resolution. When I turn it on a blue error message and I have to put in safe mode so that it works, Ive downloaded the ATI driver and who is not worked, Ive used the recovery disc to clear everything and start over, but that is not worked,

  any1 has any other ideas? THANKS FOR YOUR HELP EVERYONE

  Marc

  Post edited by: marcisaacs

  Hello

  You should not use the ATI graphics driver because this driver is not designed for the use of the laptop. Toshiba recommends to use own graphics drivers because these drivers are specially designed for the use of the laptop.

  However, after getting the procedure books should work properly. If the failure occurs after this procedure again so I guess it must be something wrong with the hardware (graphics chip)
  I don t think you will be able to solve this problem yourself.
  In this case, you must contact the Toshiba ASP.

• My Nero8 crushed & stoped working: the failing Application path

  My Nero8 crushed & stoped working: the failing Application path: program files Files\Nero\Lib\NMIndexStoreSvr.exe how can I Nero8 back to work without having to buy a new there upgrade version (Nero AG) they offer for me as a single fix?

  Hello

  1. you made any hardware or software changes the computer recently?

  2 is the issue limited to Nero 8?

  3. what operating system is installed?

  Try the following steps.

  Method 1.

  Step 1.

  Uninstall Nero 8 using the tool to uninstall Nero 8: http://www.nero.com/enu/support-nero8-tools-utilities.html

  Step 2.

  You can download Nero here: http://www.nero.com/enu/downloads.html

  Clean boot the computer and then try to install Nero 8. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  If the steps above do not help, then contact support for Nero here: http://www.nero.com/enu/support-contact.html

  I hope this helps.

• HP QuickTouch screen has stoped working

  HP QuickTouch screen has stoped working

  Have you checked Support HP?

  http://WWW8.HP.com/us/en/support-drivers.html

• my microphone has stoped working on the headset once I plugged the camera.

  Original title: helmet does not

  My headset was working fine, after I pluged in my cam stoped working microphone. I unplugged the cam, but I cannot get my microphone to work. Any idea?

  Hello

  Thanks for choosing Microsoft Community!

  If I understand correctly, the microphone of the headset does not work.

  Please answer these questions to better understand the issue:

  1. What is the brand and model of computer headset?

  2 - does it not work on a particular application like Skype?

  We defer the following methods:

  Method 1: Run the following fix - it:

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  Method 2: See the steps mentioned below and verify that the default audio device is properly set:

  a. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.

  b. click on the recording tab, click on Microphone and then click Properties.

  c. click the levels tab and make sure the mute button is off, so now to click on it to activate the sound for this connection and then click on apply.

  d. to listen to the sounds of the microphone through your speakers or headset, click the listen tab; Click on listen to them this peripheral box.

  e. also click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral box and then click OK.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

  I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

  Concerning

  P. J.

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to contact Lexmark printer and check.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

• "display driver has stoped working, but was recovered" and then shuts down the system. "

  I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :(     (I have windows vista & pentium bicoeur.)

  This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.

  If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.

• My computer keeps telling me that my display R300 driver has stoped working, but has recovered.

  original title: my computer tells me that my display R300 driver has stoped working, but has recovered. What is a R300 display driver and how can I solve this problem?

  This happens often when I look at the videos on YouTube

  Hello LightningPurple,

  This problem may occur if the display on your computer driver does not work. I suggest that you update the drivers for your video card and check if you have the same problem. You can see the underside of section which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.