My z3 compact SD card problem

Similar Questions

• Copying of images from Compact Flash Card Reader on Windows 7 x 64 corrupts some image files.

  When the copy of Canon RAW files produced by a Canon EOS 40 d and Canon's EOS 5DMk2 Canon EOS 7 d a card compact flash on a PC running Windows 7 x 64 a small percentage of the files become corrupt. I tested it with several internal and external USB card reader, with the same results. Always the same images of a set of images on the card are corrupted. On my system with Windows Vista x 32 or Windows 7 x 32 this problem does not occur. If you copy an image corrupted from a machine Windows 7 x 64 one of the x 32 machines always corrupt. But you copy the same image directly from the CF card, it will be corrupted on Windows 7 x 64, but is perfectly fine in a x 32 machines. Is anyone familiar with this problem? No work around? I am a photographer and it is really annoying my workflow.

  This problem has been recreated on the following computers:

  Dell Dimension 9100 Running Windows 7 Profesional x 64
  Dell XPS m1210 Running Windows 7 Enterprise x 64

  This problem does not occur on the following computers:

  Dell Dimension 9100 Running Windows Vista Ultimate x 32
  Reference Dell Inpiron 9100 Running Windows 7 Professional x 32
  Dell XPS m1210 running Windows Vista Enterprise x 32

  Talk about drive you crazy, I can have recently fixed this problem for my PC, but I can't really understand what was the exact solution. In any case if you read my posts above, you'll see that I at least 4 PC running Windows 7 that has this issue. I have two cameras from Canon (40 d, 7 d) that present this problem and 4 compact flash cards (2 for each camera) which show this question. This issue is also never appeared on my other 2 cameras (300 d and 20 d) or on Windows XP or Windows Vista.

  To test this recurring problem, I kept one of my CF cards which was full of RAW files and stopped using it with my cameras. I used images on this card for testing. I copy the images of this map on a PC hard drive then I would like to make a second copy on the hard drive. A copy of the images I would have spotted in Adobe Bridge, the second copy I would consider only with the Canon DPP. Whenever there are images corrupted in the game that I give in Adobe Bridge and no corruption in the game that I would only see with Canon's DPP. I would then use WinMerge to compare one of the images corrupted in Bridge with uncorrupted counterpart. Sometimes the files differed not at all, which indicates that the corruption was in Adobe Bridge preview only. Sometimes there are clearly major differencs between files, which indicates that the corruption was in the file RAW itself.

  I repeated this test again and again on at least 4 computers running Windows 7. It became easy to reproduce and repeatable. The differences between several PC was that different images become corrupt on different PCs. By default on a PC, changing as ACR would affect what images have become corrupt.

  With the above in mind, I would test with clean installs on the PC. With anti-virus turned off. Without any element in windows startup. With different video cards, etc. Nothing has worked. Then on a whim, I bought and installed the Codec Pack FastPictureViewer 2.1R2 (http://www.fastpictureviewer.com/codecs/) on one of my PC Windows 7 x 64. After a reboot, I then ran my standard test above. To my surprise, none of the pictures of the test set has become corrupted. The first time it never happened on Windows 7 for sure.

  Great, I thought. So now if I take this CF card and copy the images on a PC without the Codec Pack, then the images would still become corrupt because with the right Adobe Bridge? Well, bad actually. On my other three PC without the Codec Pack these images now copy the CF card with no to corruption. The new pictures that I take with a camera show also no corruptiopn on any computer with or without the Codec Pack. It's really weird.

  All I can theorize it, is that there is something wrong with some data that has been written for cards CF. In the directory structure or some cache hidden on the CF card somewhere float codec RAW of Canon presents incorrect data, but ACR and the CaptureOne seemed not only to become confused by it, they would actually rewrite the interpretation corrupted in the file RAW itself. It's curious because the display of hidden files and protected system files do show all files on the CF card other than RAW images. The only thing that's changed on the map, it's that when I opened it upward in the preview vignettes explore now show instead of the generic Adobe icons for CR2 files. On the PC without the Codec Pack, the generic icons show yet, but very good copy the files. Whatever it either, with the Codec Pack to build miniature previews on PC it sets whatever the problem of all the PC have had reading the data off the card.

  I can't explain it. I reformatted the CF card camera and on my two PCs and doesn't seem to make a difference. But by the mere fact to have a codec generate a thumbnail preview, it seems to have 'fixed' regardless of the question. Very confusing. For the last three days, I tried to recreate the problem of corruption and simply cannot. If she resurfaced once again, I will post it here, but for now it seems that this problem is solved?

• 5.7 Lightroom will not read my cards compact flash / cards cf

  Hello.

  5.7 Lightroom will not read my cards compact flash / cards cf

  Anyone else having this problem and know the answer?

  On these laptops, the operating system recognizes the files on the card?

  What kind of card? Give us full card details, because some card readers will not read the latest maps.

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• H530s - cannot download pictures from Compact Flash card

  I have a H530S. It has a 7 in 1 card reader, but I have a SanDisk Ultra Compact Flash4GB card that does not fit in the card reader. I also have a USB card reader / writer which I plugged in but nothing happens. It's a CRV900 iVAVA.

  Please can someone tell me how I can download my pictures of this type of card? It is used to keep in my old Dell computer, so it is rather annoying that it now, not so easy. I had assumed that the 7 in 1 card reader super - duper must at least have a slot to my Compact Flash card held in so that it is a common map used in the Canon DSLR cameras.

  AAMT.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Contempt, all solved now. Thank you all for all your help and answers.

• HP LaserJet 4250: Brick HP LaserJet 4250 after firmware update failed. Compact Flash card recovery options?

  While performing an update of firmware via FTP using cURL, the HP LaserJet 4250 I worked has frozen. I had no choice but to cycle the power and hope for the best, but unfortunately it was bricked. The screen no longer lights upward when turned on (although I can hear the internal working mechanisms which is a good sign).

  While doing some research, I read it is possible to buy a 32 MB CompactFlash card with preloaded firmware (http://bit.ly/1BTZGCh), put the jumper pin on the logic board to boot from it and then re-flashing the firmware on the card. Looks like a foolproof solution, but I would like to save my company some money if possible.

  I was wondering if it is possible to use a Type I, 128 MB Compact Flash card I have handy and load the firmware above myself using a USB Compact Flash card reader/writer. Judging by what I read on another post on the forum (http://bit.ly/1GR6nM7), it seems possible to use a Unix/Linux utility such as JJ to clone another job Compact Flash card with preloaded firmware. However, I don't have such a card to clone. What I have is another HP LaserJet 4250 in working condition.

  So that raises the question, is it possible to insert my own blank Compact Flash card in a HP LaserJet 4250 work and copy the firmware the logic board to the map image by using the printer control panel? I guess it would be the only way, if necessary, to get the firmware on the card.

  However, if she is not the only way, is there an easier way to get the firmware on the card? For example, can I just format the card in FAT32 and copy the file to the RFU firmware to it and start the printer from him? Or the use of HP does it's own file system that is not readable on a PC? Also, would it be possible to use dd and simply copy the RFU directly on the card device believed himself (no file system) and boot from that?

  Sorry for the barrage of questions. I tried to find the answers to all these myself, but HP doesn't seem to provide a lot of detailed documentation on works of the firmware via Compact Flash process. I'd be very happy if someone with experience could provide the answers well! Thank you.

  Looks like I'll be solving my own number here haha. So after bit peicing together information from different positions and some experiences, I managed to save my LaserJet bricks!

  To fix a HP LaserJet 4250 bricks, two things are necessary: an of Type I CompactFlash card and other HP LaserJet 4250 work. It's a common printer, chances are you'll find another around the office.

  Here are the steps to fix the printer:

  1. The card CompactFlash Slot 1 (bottom slot) on board the logical work printer. Instructions on how to do so are provided by HP here: http://bit.ly/1NNyIol
  2. (May be optional) Initialize (format) the CompactFlash card by following the instructions on page 327 of the repair of HP LaserJet 4250 (http://bit.ly/1D22T7R)

     (a) turn off the power to the printer.
     (b) turn on the power to the printer and then press and hold the MENU button when begins the memory count.
     (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
     (d) press the BACK ARROW button. The display should INITIALIZE the DISK.
     (e) press Select (mark). The printer initializes the hard drive and continues its power on sequence.

  3. Now that the CompactFlash card is formatted, it is time to copy the NAND of the printer to work on the CompactFlash card.

     (a) turn off the power to the printer.
     (b) turn on the power to the printer and then press and hold CANCEL when begins the memory count.

  
  (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
  (d) press the SELECT button (check mark).
  (e) press the MENU button.
  (f) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
  (g) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to NAND.
  (e) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to SLOT1.
  (f) press SELECT. The copy process must begin, and the status will appear on the screen.
  (g) once the process is complete, turn the printer off and remove the CompactFlash card.
• Now that we have a working NAND on the CompactFlash card, it's time to restore to our printer masoned. Perform the following steps on the printer of bricks.

  (a) turn off the power to the printer.
  (b) Insert the CompactFlash card into Slot 1.
  (c) set the jumper on the System Board on the arrow to start from the CompactFlash card.
  (d) turn on the power to the printer and then press and hold CANCEL when begins the memory count.
  (e) continue now the button until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
  (f) press SELECT (checkmark).
  (g) press the MENU button.
  (h) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
  (i) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to SLOT1.
  (j) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to NAND.
  (k) press SELECT. The copy process must begin, and the status will appear on the screen.
  (l) once the process is complete, turn off the printer, remove the CompactFlash card and reposition the jumper to the default position.
  (m) turn on the power to the printer. That's all! Everything should work normally again. No brick no more!

UPDATE (07/04/15): IF YOU DO NOT HAVE ANOTHER HP LASERJET 4250

It turns out that you can just download the firmware on HP website and create an image of it bootable on a CompactFlash card. However, it is not as simple as just copying the firmware image. You should ignore the 633 first bytes of the file of the firmware (at least with the 08.260.1 version), then copy the rest on a CompactFlash card. You can accomplish this by running the following command on Mac OS X or Linux. Download and boot from a live CD of Linux like Ubuntu if necessary.

DD if = lj4240_4250_4350fw_08.260.1.rfu ibs = 1 skip = 633 of = / dev/disk2

Replace "lj4240_4250_4350fw_08.260.1.rfu" with the name of the appropriate firmware file and ' / dev/disk2 ' with the appropriate device if necessary.

If you prefer, a bootable copy of the revision of the 08.260.1 firmware can be downloaded here: http://bit.ly/1FeF3YP

As you can see in the image below, when opened with a hex editor, image downloaded from HP firmware starts with 1 b 25 31 2d bytes... However, the printer does not include the first part of the file when you start, because there are instructions of PJL and not binary. Bootable image begins at 631 byte (277 hex) highlighted. It may be possible that this address may change in future versions of firmware or for different printers, so here's how to know where to start the startup code. The first occurrence of 00 00 04 24 bytes, is where that starts. In ASCII, it looks to "... $". In this sequence, the 00 first is the beginning of the startup code. Here's another picture, of what should look like a bootable firmware image.

Non-bootable firmware image, downloaded directly from HP


Bootable firmware image, extracted of HP download



For fun, I unpacked it some of the files included in the firmware image, and it turns out that tracks on the printer to LynxOS. Who would have thought?

• Compact flash card in the atmosphere of the iPad

  A way to download pictures from a compact flash card or directly from my 5 d Mark III to air from my iPad. I know that Apple has a SD card cable. anything for the compact flash?

  Tell your 5 d III to save images on the SD card and use the SD card reader.

  You can optionally use Apple's USB adapter and then connect via the USB cable (in this case any card slot lets you record images.)

• Start Windows Vista or graphics card problem problem

  OK have a problem with Windows Vista here. Its pc of my grandmothers, only a year or two. (office) My brother went in safe mode and came back with a restore point. He said it worked, but now, the screen goes black trying to open windows.

  What's happening...
  It starts showing the status of the drives and ram memory and asks me if I want to install through F10 (which works) then it goes to the "Windows was extinguished not correctly." And it gives the offer of
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Normal windows startup
  The security mode through the long load upward and then a black screen and an arrow of big white mouse I can move.
  Normal windows opens with the quick bar Windows... then nothing. Just a black screen and a white mouse arrow. Of Cntrl Alt Del does nothing and only thing that makes something happen hit SHIFT 5 times. It causes a beep and a window opens asking if I want to use StickyKeys. Other then that I had nothing.
  I'll try to find a Windows Vista dvd to repair.
  Part of me wonders if it is a screwing display driver. As I said some stuff shows up to save for windows, so it's a small chance, but to think what anyone.
  Care,
  Windows Vista Edition home premium
  HP Pavilion p6110t

  Hello

  If you start Windows, see a desk white or black with no icons, video card problems are the most common cause of this problem.

  Try the following troubleshooting steps:

  Method 1: Access your computer and reinstall your current video driver

  Uninstall your video driver and allow Windows to re - install:

  1. click on start and type device manager in the search box

  2. click on device under Programs Manager

  3. Select the video driver and uninstall

  4 restart your computer to allow Windows to reinstall the driver

  Note: Once the driver is reinstalled, you may need to restart your computer to complete the installation. In addition, you will also need to adjust the resolution of the display to its previous value.

  Method 2: Turn on the video resolution (640 x 480) and then update your video card driver

  If the resolution of the registry problems does not work, perform the following steps to activate the video resolution:

  1. Click the Start button, click the arrow next to Shut Down and then click on restart.
  2. Press F8 before the Windows logo appears.
  3. In the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.
  4. Log your computer with a user account with administrator rights.

  If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information,.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Start your computer in Mode safe mode and disable your video card

  If activation low resolution and then update your video card driver do not work, perform the following troubleshooting steps to disable your video card driver:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  When your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 5: If these steps do not resolve your problem, try to boot mode safe again and follow the steps in the system restore to restore your computer to an earlier point in time.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Note: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  If this still does not have the problem, contact your computer manufacturer or the technical support for further assistance.

  It will be useful.

• Back up the old hard drive to the laptop on a Compact Flash card

  Hello:

  I have an old laptop Compaq 1220, works under Windows 95.

  I have a CD drive (read only) and an internal 2 GB drive hard.

  It has a slot for a card-card: the card can contain a Compact Flash (CF) card.

  I also have a HP laptop much more current, which can read/write from/to CF cards,.

  via a CF card recorder/reader, which has a USB conector.

  I would like the files to "Backup" 2 GB HD to the CF card, so that they can transfer to the HP laptop.

  I have to do something other than files (special) "gliding &" of the 1220 Compaq to the CF card?

  If so, please provide details.

  I don't think I need to transfer all the Windows 95 files since they would be worthless for the

  HP laptop running Vista 32 bit Home Premium (or I'm wrong).

  I don't think I need to create an encrypted "image", because I don't want to install it on another machine (with BONE).

  Thank you...

  DaleB

  Hello

  There is no special procedure other than drag / move to copy your Windows 95 computer data files in the card compact flash.

  You will have to copy the files from Windows 95 computer data to compact flash card, then insert the same card compact flash in the Windows Vista-based computer card reader and then transfer the data files.

• Sony xperia z3 compact sim card cover flap

  Someone in the United Kingdom can point me in the right direction on where I can find an AUTHENTIC, not a copy, the hatch cover Sony for my white Xperia Z3 Compact sim card?

  My origin is tired, to be honest, very bad quality for such a premium brand phone, especially when Sony knows that open and close whenever it needs to be recharged (I do not use the magnetic contacts for recharging).

  Thank you

  Thanks for the tips, I had already looked at Amazon (not those who are authentic not found).

  Contacted Sony repair... NO WAY on this planet you I send my phone them for such a small article, which could be easily sent to me.

  I found a couple of those who are genuine on ebay, arriving tomorrow.

  Bought a couple, because I know that the flap will again later.

• Card problem multimedia blackBerry Z3

  I use my media card in BlackBerry z3 and he said that it could solve media card problems summary abd will be quickly deleted what I can do

  I have format my card many times but the problem occurs again and again that I have to change my card while this problem reoccur

• Screen flashes different colors and freezes at the same time, there is a video card problem?

  When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
  Any help would be greatly appreciated.

  EDIT: I forgot to mention that it is a HP G62 laptop.

  Hello

  Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

  Let me know if this helps you.

  Kind regards

  BearPup

• Problem with the transfer of the applications on a a new Xperia Z3 Compact SD card

  Hello

  Yesterday, I brought a Z3C and Iam really satisfied with the phone.

  Today, I wented to "NetOnNet" (the store where you can buy home-technic animals) and brought a "Transcend, adapters, UHS - I, 64 GB, class 10, up to 45 Mbps, Premium 300 x" card so I could have a little more memory on the phone instad for just localmeory (10 GB).

  It works fine, I can store photos, videos and music 'walkman' on it, but now the problem I can't store apps on the SD card anny!

  As I am a user of "Spotify" I need to have space to download all my music, but I can't store all my music on phones of HDD, so I need to use the SD card, but I can't find a way to do it! It does not work throu > settings > Apps > "Spotify" > change storage on SD card place. Neither the > settings > storage > Apps > "Spotify" > change location for SD, due, there is not a button for the use of the chaning storage!

  I searched the internet for a solution, but I have not found anyone.

  Please help me!

  Edvin

  Unfortunately, the transfer of applications to the SD card is no longer officially supported by Android. You will need to look around for third-party methods, although they require your phone to be rooted.