Similar Questions

• How can I fix an 'Access denied' error when connecting to mySQL database to a site (I'm sure I can get...)

  Hello

  I had a search on the forums and I don't see anyone with the same problem so I apologize if this has been asked before.

  I need to connect a database to a Web site so that members can register and save it to some pages (not all pages - only a 'members only' section).

  I created the database, tested and it works very well (I used XAMMP/PHPmyAdmin).

  In DreamWeaver CS6, I chose the type of document from the page (PHP) and set up the testing server. If I go to site Configuration > server for the site and click on test, it connects successfully. Note that the test server is hosted at the University, that I work - there is a password required, but I entered it on the test set up server and it seems connects very well, as I get the message successfully at this stage.

  When I go to connect the mySQL connection and select the database I get the error "access is denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. »

  Any ideas? It's driving me crazy!

  I understand that after several unsuccessful searches on Google, so I post the solution here for someone else with the same question that could end up here.

  If you configure your test server in the inetpub/wwwroot/folder then Dreamweaver cannot make changes (such as adding files) unless you are running as an administrator, so it occurred to me that maybe the database connections are also affected.  Of course, as soon as I leave Dreamweaver and restarted as an administrator, I was able to connect to the MySQL database using the databases Panel.  If you don't know how to run a program as an administrator, it is pretty easy: just right click on Dreamweaver icon and select "Run As Administrator" when you start the program.  There are a lot of tutorials out there that can give you the necessary steps for always loads a program as an administrator if you don't do right click every time.

  Version: Dreamweaver CC 2015.

• Error Warning: mysql_pconnect() [function. MySQL-pconnect]: access denied

  Hi all

  I am creating a website in Adobe Dreamweaver CS6. I am trying to add a page with a membership form that fields of entries in a database.

  I have set up a local test server (using xampp) that worked. That is to say the form accepts the data and passes through to the database.

  However, when I put the form and files to the remote server and try to access the page of form input (www.friendsofchopin.org.au/mem_form.php), I get the following error:

  Warning : mysql_pconnect() [Function.MySQL - pconnect]: access denied for user 'chopinau_admin'@'localhost' (using password: YES) in /home/chopinau/public_html/Connections/memconn.php on line 9
  
  Fatal error: access denied for user 'chopinau_admin'@'localhost' (using password: YES) in /home/chopinau/public_html/Connections/memconn.php on line 9

  memconn.php script is the following:

  <? PHP

  # FileName = "Connection_php_mysql.htm"

  # Type = 'MYSQL '.

  # HTTP = 'true '.

  $hostname_memconn = "localhost";

  $database_memconn = "chopinau_membership";

  $username_memconn = "chopinau_admin";

  $password_memconn = "xxxxxxxxxxxx";

  $memconn = mysql_pconnect ($hostname_memconn, $username_memconn, $password_memconn) or trigger_error (mysql_error (), E_USER_ERROR);

  ? >

  
  

  Grateful for any help in changing the code (total nube), also have a doc with screenshots and details of what I do in Dreamweaver and in my cPanel.

  See you soon,.

  Ben

  DonaldConnan wrote:

  Hi Preran

  I have the same problem. It works fine when I use it on my test in Dreamveawer CC (preview/debug in browser) machine, but as soon as I test it on the Web server, it gives the error. I use the same host, user and password.

  Concerning

  Donald

  Your remote connection may be different from your local connection.

  Did you check with your host that what connection you should use?

  'localhost' in the connection string might be just your domain name - "yourdomain.com".

  $connect=mysql_pconnect("localhost","root","password")or die("error in user");

• Is it possible that muse adobe to have a Back-End that connects to a database using MySQL, SQL, Access etc...

  Is it possible that muse adobe to have a Back-End that connects to a database using MySQL, SQL, Access etc...

  Nothing to do with the Muse at all. You have things backwards. If you use a dynamic interface, you work in the API hooks and predefined functions and that he don't just slap on an arbitrary HTML façade. It is simply not how it works.

  Mylenium

• Created a site in dreamweaver, want to now set up the MySql database and username / password to access

  I created a site in dreamweaver, now you want to set up the MySql database and username / password to access a part of it. Dreamweaver's tools?

  I guess I need to learn PHP?

  Guidance gratefully received!

  Bob

  If you simply need to restrict access to your site, or a part of your site, there is an easier way to do it, using Apache htpasswd, but this solution is very limited and not suitable for use with clients, there is no interesting features people expect, as the ability to reset a lost password.

  Otherwise, Yes, you will need to learn some PHP and SQL.

  You will start by setting up your development computer with an Apache web server, which comes with PHP and possibly also MySQL. There are free versions, such as XAMPP, but I prefer Zend Server, which costs $195.

  Dreamweaver includes data 'tools' to the CS 5.5 version and there are third-party plugins available that will handle the data functions, but to really make things right you need to learn how to write your own code and don't mess with the tools who write code for you that you can not understand and are difficult to change.

  I think that David Powers PHP Solutions book is a good introduction and also includes a tutorial on building a password access system that is fine.

• Database access denied - but for months before, it was OK!

  I worked on a project for months in CS 5.5 (Windows 7 64-bit.)  Yesterday my connection to MYSQL database suddenly did.  I consulted the database even in 2 other applications successfully on my own computer and technical support of my hosting company (Codero) accessible also with success the same database at the same time, while I was on the phone.  No clue in the error message.  Its just "access denied."  If something is wrong and I did it without doubt, and now I don't know how to get back on track.  It seems to be a problem specific to my installation.    No idea where to start?  My installation is a lease paid in advance fully authorized Adobe, automatically updated daily via internet.

  Ok.  I thought about it. The problem was related to my use of a subdomain for a development site.    Dreamweaver detects URLs in the database by looking at the WEB url, as written in the page of server configuration, the configuration of a Site dialog box.  The full path where the site on the server files is specified in the directory "root". who has been to properly resolve the name of the server, Dreamweaver takes "/ subdomains/dev/httpdocs /" "bizzocall.com /" and he cocatenates with this directory root to give you a name to use for FTP connections full path.  What I did wrong was use the directory "root" in the field "Web URL" as well.  I had this path defined incorrectly as "bizzocall.com/subdomains/dev/http/".   "This caused the database url be cocatenated like this: dev.bizzocall.com/subdomains/dev/http/", which is redundant and went nowhere.  When I changed the WebURL to http://dev.bizzocall.com, it worked.  I hope that this little exercise is useful to someone!  :<>

• MySQL timestamp formatting errors

  I continue to have strange formatting errors when pulling data from a MySQL database.  I'm having now is with time values.

  

  The screenshot shows that the error is generated in the variant to Data.vi the real time stored in the database is from 08:30, but the conversion of timestamp, I get 8:29:59.999 unfortunately, there doesn't seem to be an easy way to 'around' this value to what I want either.

  I might go back to output string, because this particular error does not appear to spread in a chain.  But that mess with the rest of my application.  Return to the output chain cancels a couple of working days and leaves me with the problem of having to convert the string 'time' again in timestamp that LabVIEW can understand.

  The really weird thing is that 12:30 comes as 12:30 very well.  I don't know why that would be.  Any ideas?

  You can do this with the format string "% I: % h: %s %p %<%m/%d/%Y > T '

  

• Format XP Microsoft JET Database Engine error 80004005 unrecognized database would be...-

  XP Microsoft JET Database Engine error '80004005' Unrecognized database format would be... -Is a message I get. Don't know how to fix it?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. He would be grateful if you could answer a few questions to refine the question.

  1. Once you get this error?

  2. are you aware of changes to the computer before the show?

  3. you use ActiveX Data Objects (ADO) or ODBC to connect to a Microsoft Access database?

  4. This error occurs when you run a specific program or out of order?

  5 are logged as administrator?

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
   
  See this link for more information on:
   
  http://support.Microsoft.com/kb/555375

  Provide more information about the issue so that we can help you.

• Link from Oracle to MySQL database select only one line

  Hello

  I created a connection to the batabase Oracle 11.2 to a MySQL database via a database link. The following statement shows that 35 lines are in the mySQL table:

  SQL > select count (*) from 'main_pages"@MOREWEB;

  COUNT (*)

  ----------

  35

  But a normal select statement only return 1 row.

  SQL > select 'subject' of 'main_pages"@MOREWEB;

  Object

  ------------------------------------------------

  Übersicht: references

  I use the mysql-connector-odbc driver - 3.51.30 - winx64. One is the newer version be installed because on Windows Server 2008 R2, I get an error with a missing dll file. The DataDirect ODBC driver is not possible, because we like to use the MySQL-database free one only support for DataDirect enterprise edition.

  I have also tried to limit the HS_OPEN_CURSORS or do not limit the HS_FDS_FETCH_ROWS, but there is no difference in the result. I always get only one line.

  HS Init.ora
  # This is an example of initialization file of the agent that contains the HS settings # necessary for the database to ODBC gateway # # HS init parameters # HS_FDS_CONNECT_INFO = moreweb HS_FDS_TRACE_LEVEL = WE HS_FDS_FETCH_ROWS = 1 # # Required for the non-Oracle system environment variables # #set < varenv > = < value >

  HS trace file

  Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Heterogeneous Agent release 11.2.0.1.0 Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Version 11.2.0.1.0 HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'ON '. HOSGIP to 'HS_OPEN_CURSORS' returned '50 '. HOSGIP to 'HS_FDS_FETCH_ROWS' returned '1 '. HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536". HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. " HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '. HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '. HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '. HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '. HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '. HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '. HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG". HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '. HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '. HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '. HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '. HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.

  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.

  using mpgw as the default value to "HS_FDS_DEFAULT_OWNER".

  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.

  SQL text of hgopars, id = 1, len = 36...

  45 00: 53454 C 43542043 4F554E54 282 HAS 2920 [COUNT (*) SELECT]

  10: 46524F4D 20606D 61 696E5F70 61676573 [FROM ' main_pages]

  20: 60204131 [' A1]

  Delayed open until the first fetch.

  Deferred execution open.

  SQL text of hgopars, id = 1, len = 40...

  45 00: 53454 C 43542041 312E6073 75626 has 65 [SELECT A1.' subje(1)]

  10: 63746020 46524F4D 20606D 61 696E5F70 [ct' FROM ' main_p]

  20: 61676573 60204131 [ages A1]

  Delayed open until the first fetch.

  Deferred execution open.

  Please can someone help me.

  Thank you.

  Bianca

  Bianca,

  Everything I've read on this point to a need to install/reinstall the Microsoft Visual C++ Redistributable Package for windows OS 2008.

  You will need to download the appropriate version for your microsoft form system.  There is a lot of information on this topic.  Just

  search on the web, and it should help you in the right direction.

  Thank you!
  Matt

• JDBC connectivity with a mysql database

  I created a MySQL database, but I have problems with communication with the DB in java

  Here is the error

  java.sql.SQLException: no suitable driver found for jdbc:mysql://localhost:3306 / books

  at java.sql.DriverManager.getConnection(DriverManager.java:604)

  at java.sql.DriverManager.getConnection(DriverManager.java:221)

  to displayauthors. DisplayAuthors.main (DisplayAuthors.java:30)

  java.lang.NullPointerException

  to displayauthors. DisplayAuthors.main (DisplayAuthors.java:66)

  BUILD successful (total time: 1 second)

  ---

  I edited windowds system variables

  CLASSPATH

  .; C:\Program Files (x86)\Java\jre7\lib\ext\QTJava.zip

  CLASSPATH1 (note the 1 at the end, I don't want to replace the previous

  ., C:\Program Files (x 86) \MySQL\Connector J 5.1.30\mysql-connector-java-5.1.30-bin.jar

  ---

  Host name: localhost Port: 3306

  User name: root

  password: Tpswsd77? (changed to thios post)

  Stored connection: Instance local MySQL56

  Connection method: Standard (TCP/IP)

  HERE IS THE CODE

  public class DisplayAuthors {}

  Database URL

  public static final String DATABASE_URL = "jdbc:mysql://localhost:3306 / books."

  Launch the application

  Public Shared Sub main (String args [])

  {

  Fitting out = null; corresponds to a connection

  Statement statement = null; query statement

  ResultSet resultSet = null; manages the results

  connect to the database books and database query

  Try

  {

  establish a connection to the database

  connection = DriverManager.getConnection)

  DATABASE_URL, "deitel', 'deitel'sc');

  < defaultstate editor-fold = "collapsed" desc = "comment" >

  DATABASE_URL, 'root', 'Tpswsd77?');

  < / Publisher-trick >

  CREATE statement to query the database

  Statement = connection.createStatement ();

  query database

  resultSet = statement.executeQuery)

  "SELECT authorID, firstName, lastName FROM authors");

  process query results

  ResultSetMetaData metaData = resultSet.getMetaData ();

  int numberOfColumns = metaData.getColumnCount ();

  System.out.println ("Table Authors of books database: \n");

  for (int i = 1; i < = numberOfColumns; i ++)

  System.out.printf ("%-8s\t", metaData.getColumnName (i));

  System.out.println ();

  While (resultSet.next ())

  {

  for (int i = 1; i < = numberOfColumns; i ++)

  System.out.printf ("%-8s\t", resultSet.getObject (i));

  System.out.println ();

  } / / end while

  } / / end try

  catch (SQLException sqlException)

  {

  sqlException.printStackTrace ();

  } / / end of capture

  Finally / / resultSet, statement and connection are closed to this

  {

  Try

  {

  resultSet.close ();

  Statement.Close ();

  Connection.Close;

  } / / end try

  catch (System.Exception Exception)

  {

  exception.printStackTrace ();

  } / / end of capture

  } / / end finally

  } / / main end

  } / / end of class DisplayAuthors

  Given that you seem to be running from netbeans, you would better add the jar to the project libraries...

  And NO, you should NEVER put anything in your system classpath. It's a very bad habit, led to the equivalent of Java of the DLL hell and of course from the moment that you distribute the application to any other machine that's going to fail again.

  Add it instead of the specific CLASSPATH of the application.

  And do not put anything on the class path that has spaces in the name, it is no longer can cause problems, but don't count on that it works.

• Access error of data while running the script in the script fdm workbench Editor

  Hello Experts,

  I get the error when I run the script in the script of fdqm established client.this editor is the error

  -2147467259 data access error and he navigates the error on line 30 on this script «Set rsAppend = DW.» DataAccess.farsTable (strWorkTableName).

  Please return me asap where I should charge peoplesoft data to one of my database of planning through fdm.

  Thanks in advance...

  You will need to build a script for integration that is an import Script that allows you to import data from SQL in FDM.

  When you create your import format, you will need to configure it with the file Type = Script and then assign the script of integration as an Expression. Assign your import format to the location that you use to import data.

  Then you can test it by going to the import stage and clicking the import button. FDM will run the integration script and data import by running the SQL query that you have defined.

  To the contrary, "Data Pump" import Scripts are used as import expressions in the import formats

  You can run a script to integrate the customer that this script requires input parameters that are passed only when then FDM import step is executed. If you want to see the raised error open the errorlog FDM. You will only be able to run this Workbench script when you want to debug data is being extracted, but in this case, you will need to comment code that inserts the data in the table. Don't forget that the work table is a temporary table that is created when you click on the import button and if you run Workbench this table does not exist

• Can I change the MySQL database records?

  Hello

  As the title says, can I change the MySQL database records from the database window or can I only browse the structure?

  Thanks for your time, Steve

  No, you will need to use a front-end such as PHPMyAdmin, MS Access, tool or any tool SQL front end.

• Problem, try to connect to oracle to mysql database

  Hello
  
  I need assistance with the configuration, I'm trying to connect to an oracle 11 g r2 windows to a linux mysql 5.5, but I'm having a lot of questions, here, I'll put the configuration.
  How thanks for everyone's trying to help me!
  
  Here is my tnsname.ora:
  tnsnames.ora # Network Configuration file: C:\app\Administrador\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = gabriel-103eff2)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  ms_connection =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = gabriel-103eff2)(PORT=1521))
  (CONNECT_DATA = (SID = ms))
  (HS = OK)
  )
  
  
  
  Here's my listener.ora:
  
  listener.ora # Network Configuration file: C:\app\Administrador\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\app\Administrador\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Administrador\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  (SID_DESC =
  (SID_NAME = ms)
  (ORACLE_HOME=C:\app\Administrador\product\11.2.0\dbhome_1)
  (PROGRAM = dg4odbc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = gabriel-103eff2)(PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = C:\app\Administrador
  
  
  
  Here's the init*.ora:
  
  # This is an example of initialization file of the agent that contains the HS settings
  # necessary for the database to ODBC gateway
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = ms
  HS_FDS_TRACE_LEVEL = debug
  
  
  #
  # Required for the non-Oracle system environment variables
  #
  #set < varenv > = < value >
  
  
  
  Here is the fix:
  
  
  
  Oracle Corporation - SEXTA-FEIRA 17:18:13.390 January 4, 2013
  
  
  Heterogeneous Agent release
  11.2.0.1.0
  
  
  
  
  Oracle Corporation - SEXTA-FEIRA 17:18:13.390 January 4, 2013
  
  Version 11.2.0.1.0
  
  Hgogprd entries
  HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'debug '.
  Hgosdip entries
  default assignment of 50 HS_OPEN_CURSORS
  setting HS_FDS_RECOVERY_ACCOUNT or 'RECOVER '.
  HS_FDS_RECOVERY_PWD layout to the default
  default HS_FDS_TRANSACTION_LOG of HS_TRANSACTION_LOG layout
  HS_IDLE_TIMEOUT layout to the default 0 value
  layout by default HS_FDS_TRANSACTION_ISOLATION of "READ_COMMITTED".
  layout default HS_NLS_NCHAR to "UCS2".
  layout HS_FDS_TIMESTAMP_MAPPING default 'DATE '.
  layout HS_FDS_DATE_MAPPING default 'DATE '.
  layout HS_RPC_FETCH_REBLOCKING failure to 'ON '.
  HS_FDS_FETCH_ROWS layout without '100 '.
  parameter HS_FDS_RESULTSET_SUPPORT default 'FALSE '.
  parameter HS_FDS_RSET_RETURN_ROWCOUNT default 'FALSE '.
  parameter HS_FDS_PROC_IS_FUNC default 'FALSE '.
  parameter HS_FDS_CHARACTER_SEMANTICS default 'FALSE '.
  parameter HS_FDS_MAP_NCHAR if there is no 'TRUE '.
  setting HS_NLS_DATE_FORMAT or 'YYYY-MM-DD HH24:MI:SS ".
  parameter HS_FDS_REPORT_REAL_AS_DOUBLE default 'FALSE '.
  HS_LONG_PIECE_TRANSFER_SIZE layout without "65536".
  parameter HS_SQL_HANDLE_STMT_REUSE default 'FALSE '.
  parameter HS_FDS_QUERY_DRIVER if there is no 'TRUE '.
  parameter HS_FDS_SUPPORT_STATISTICS default 'FALSE '.
  The HS_FDS_QUOTE_IDENTIFIER parameter is not defined
  setting in HS_KEEP_REMOTE_COLUMN_SIZE if 'OFF '.
  parameter HS_FDS_GRAPHIC_TO_MBCS default 'FALSE '.
  parameter HS_FDS_MBCS_TO_GRAPHIC default 'FALSE '.
  Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
  HS_CALL_NAME_ISP layout "gtw$: SQLTables; GTW$: SQLColumns. GTW$: SQLPrimaryKeys. GTW$: SQLForeignKeys. GTW$: SQLProcedures. GTW$: SQLStatistics; "gtw$: SQLGetInfo.
  parameter HS_FDS_DELAYED_OPEN if there is no 'TRUE '.
  HS_FDS_WORKAROUNDS layout by default "0".
  Release of hgosdip, rc = 0
  ORACLE_SID is "ms."
  Product information:
  Port RLS / Upd:1 / 0 PrdStat:0
  Agent: Oracle Database Gateway for ODBC
  : Installation
  Class: ODBC, ClassVsn:11.2.0.1.0_0008, Instance: ms
  Release of hgogprd, rc = 0
  Hgoinit entries
  HOCXU_COMP_CSET = 1
  HOCXU_DRV_CSET = 178
  HOCXU_DRV_NCHAR = 1000
  HOCXU_DB_CSET = 873
  HOCXU_SEM_VER = 112000
  Entry hgolofn to 2013/01/04-17: 18:14
  Release of hgolofn, rc = 0 to 2013/01/04-17: 18:14
  HOSGIP to 'HS_OPEN_CURSORS' returned '50 '.
  HOSGIP to 'HS_FDS_FETCH_ROWS' returned '100 '.
  HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536".
  HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. "
  HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '.
  HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '.
  HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '.
  HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '.
  HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '.
  Invalid value of 32 for HS_FDS_SQLLEN_INTERPRETATION
  treat_SQLLEN_as_compiled = 1
  Release of hgoinit, rc = 0 to 2013/01/04-17: 18:14
  Entry hgolgon to 2013/01/04-17: 18:14
  Reco:0, tflag:0, name: SYSTEM
  Entry hgosuec to 2013/01/04-17: 18:14
  Release of hgosuec, rc = 0 to 2013/01/04-17: 18:14
  HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '.
  HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG".
  HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '.
  HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '.
  HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '.
  HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '.
  HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '.
  HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '.
  HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.
  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.
  using the SYSTEM as default value to "HS_FDS_DEFAULT_OWNER".
  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.
  Entry hgocont to 2013/01/04-17: 18:14
  HS_FDS_CONNECT_INFO = "msodbc".
  RC =-1 of HOSGIP for 'HS_FDS_CONNECT_STRING '.
  Entry hgogenconstr to 2013/01/04-17: 18:14
  DSN:msodbc, name: SYSTEM
  OPTN:
  Entry hgocip to 2013/01/04-17: 18:14
  DSN:msodbc
  Release of hgocip, rc = 0 to 2013/01/04-17: 18:14
  Release of hgogenconstr, rc = 0 to 2013/01/04-17: 18:14
  Entry hgopoer to 2013/01/04-17: 18:14
  hgopoer, line 233: had native error 0 and sqlstate IM002; message follows...
  [Microsoft] [ODBC driver manager] Nome da dados nao e found melting nenhum driver padrão especificado {IM002}
  Release of hgopoer, rc = 0 to 2013/01/04-17: 18:14
  hgocont, line 2753: call SqlDriverConnect obtained sqlstate IM002
  Out of hgocont, rc = 28500 to 2013/01/04-17: 18:15 with the ptr error FILE: hgocont.c LINE: 2773 ID: something else that permission is not valid
  Out of hgolgon, rc = 28500 to 2013/01/04-17: 18:15 with the ptr error FILE: hgolgon.c LINE: 781 ID:Calling hgocont
  Entry hgoexit to 2013/01/04-17: 18:15
  Release of hgoexit, rc = 0
  
  ______________________________________________________
  
  When I use tnsping ms_connection
  
  
  C:\Documents and Settings\Administrador > tnsping ms_connection
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2
  013 09:04:29
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Archives of Parometros books:
  
  
  Used o useful TNSNAMES para resolver o apelido
  Contatar trying (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = gabriel-103eff2
  () (PORT = 1521)) (CONNECT_DATA = (SID = ms)) (HS = OK))
  OK (0 ms)
  
  
  
  
  
  Thank you very much!!!

  Hello
  The error in your gateway trace file-

  [Microsoft] [ODBC driver manager] Nome da dados nao e found melting nenhum driver padrão especificado {IM002}

  translates-

  Data Source name not found and no driver by default specified

  This means that you don't have a system DSN defined on the Windows machine called "ms", which uses a MySQL ODBC driver to connect to the MySQL database on your Linux machine.
  The system DSN to be used is defined by the parameter-

  HS_FDS_CONNECT_INFO = ms

  Therefore, you must perform the following operations

  -install a driver Windows ODBC de MySQL
  -define a DSN system whichuses this driver to connect to your MYSQL Linux
  -Use this DSN as parameter HS_FDS_CONNECT_INFO

  You must ensure that the DSN can connect to MYSQL without Oracle involved before DG4ODBC can also establish a connection.

  Kind regards
  Mike

• fixing mysql database

  I have an old database that came from MS SQL and was imported long ago to mysql. He seems to have a few bad dates I need to fix...

  Some appear in the format:

  0000-00-00 00:00:00

  error in cf research says:

  cannot be represented as a java.sql.Timestamp

  (I think they speak of this area...)

  It makes it difficult to update the PB when it keeps the slightest mistake...

  also I tried to look with phpmyadmin in the field for: AS and 0000

  but empty shows query

  I've noticed that most recent TS seem to have additional one.0 in the end as:

  0000-00-00 00:00:00 = old problem?

  2012-10-01 00:00:00.0 = new ok...

  Q: How can I get around this?

  It is a well known problem in older versions of MySQL. A common solution is to include the property

  zeroDateTimeBehavior = convertToNull

  in the field of connection string in the source settings in the ColdFusion Administrator of MySQL database. Requests and then returns the value NULL in the 0000-00-00 00:00:00 as is encountered. See, for example, the Nadel's blog on this.

• FDM data access error

  Experts, I am trying to delete a period in control of FDM 9.3.1.2 tables, but it gives an error: "error to remove folder. "Detail: data access error. In the log file, I find the following error messages for this action.
  
  * Start the journal entry for the Runtime Error FDM [2011-07-28-15:25:19] *.
  -------------------------------------------------------------
  ERROR:
  Code...-2147217913
  Description... ORA-01843: not one month valid
  SELECT * FROM tPOVPeriod WHERE (PeriodKey = '' 2008-30-11)
  Process... clsDataAccess.farsKeySet
  The component... upsWDataWindowDM
  Version...................................... 931
  Thread....................................... 10804
  * Start the journal entry for the Runtime Error FDM [2011-07-28-15:25:19] *.
  -------------------------------------------------------------
  ERROR:
  Code...-2147217913
  Description... Data access error.
  Process... clsSQLUpdateMgr.fPOVPeriod
  The component... upsWObjectsDM
  Version...................................... 931
  Thread....................................... 10804
  
  The error message indicates the period during which I tried to remove it, but I'm still not able to remove it. It's strange, as this production application was working fine until a return of the month and the development of application works very well with this action. Experts, let me know how this can be resolved.

  Most likely possibility that I can see (although I can't explain why it happened) that would be:

  #1-the format of date and time settings are different between the database server and the server WEB/FDM. A server might think date should be in the mm-dd-yyyy format while the other waits aaaa-mm-jj. If you have access to the database, you should be able to confirm this. The 64K question would be why would be a question at random as it should influence a lot of things?

  Another possibility would be for the period swelled in question, the value stored in the DB does not match the value of this request. Maybe a white space or something else was annexed to the date and request failed with no result that generated the error. A quick glance in this database table would quickly confirm this. I doubt that is the issue because of the specifitivity of the error message.