Mysterious incorporated rules

Similar Questions

• Rule & edge of mystery

  Hello.  I'm relatively new to Dreamweaver and can't find the answer to a question that I met. I 'picked up' a model of Dreamweaver start page and reconfiguring it to a practice site I build.  My problem: I'm unable to remove a dark gray border surrounding my image on the left (from the zipped attachment). I am also unable to find the code for the removal, which generates the vertical ruler (also on the left side). It's under my nose and I do not see? Thanks for any help that you can afford.

  The problem is that you are using a series of complex tables and nested tables, spans of lines and columns, which will be at the end of the day, unless you know precisely what you do end with a defeat.

  Your problem is caused by thethe cell that the table on the right is 190px wide and the table itself, only wide 188px.  (see code below)

  
     

  Not only that, but you have another

  
      '

  These two combined is source of your vertical line.

  I see a major problem for you before because you create code without really having the knowledge of what it produces. The method you are using is out of date, which will probably be the cause you headaches.

  I start and create a much simple construction base table. Setting height and width too, more splitting of cells will lead to a page that cannot be recovered. Unfortuantely I think you may miss your depth to what learn you a little more.

  cell next to him set to "1" wide

• Mail rules 'no mailbox not selected' madness

  I used a set of rules to mail in Mail.app 50 for about ten years now. He has always been a struggle. Mysteriously disabled mail rules and many other problems. But now the whole system is just crazy completely. Desperately, I ask someone to help me, please.

  Most of my mail rules moves e-mail to specific mailboxes. Mail is synchronized via iCloud to multiple computers. A desktop at home and work and a laptop computer. The first symptom of the problem is when my desk at work suddenly not said for each mail rule "no mailbox selected. It was pretty boring, so I restored all the manually. It's about an hour's work. Then I noticed that my office at home and my laptop had the same problem.

  My questions are:

  1. How can I get the correct e-mail rules that I set on the desk to my other computers?

  2. How can I save my e-mail rules so that I can reload them from a backup in the future.

  The natural response to 1 should be: they will be automatically synchronized via iCloud. But they do not. I've tried their reload from a backup time machine at home and copy the files under my desk in my home office (?) manually [I assumed the corresponding files are

  SyncedRules

  RulesActiveState

  UnsyncedRules

  SyncedFilesInfo

  in ~/Library/Mail/V3/Maildata]

  It did not work. I tried to turn off synchronization iCloud home and removed all of the Maildata folder. I thought that this would reset all the rules. But no: after this operation, all the rules were always there, disabled, but with "no mailbox selected. It's like the head of a Hydra Cup... Now, I'm desperate. How can I reset Mail completely to its original state, and is there any hope it will then download the correct rules of iCloud?

  But there is more folly. If I change one of the "no mailbox selected" to the mailbox (I use IMAP), then all THE "no element of selected mailbox" is changed for this particular mailbox, so that after this moment my rules 49 50 mail are bad, and all mail would disappear in the wrong mailbox.

  And on top of that, there is a problem, I already reported twice to Apple in the past: during this process, the lower part of the mail rule Panel slides slowly up to hide himself behind the top of the Panel. Then the mailbox user selection button no longer, and you leave Mail for this problem.

  I have the same problem.  Does anyone have a solution?

  Thank you

• Trying to modify a file exported sigmaplot .eps and text is not incorporated. Is there a way to incorporate artificial intelligence, or should happen in sigmaplot?

  Hi all.

  First assignment in time. I have 9 + graphics that are exported from sigma plot as .eps files. I am changing all of them in artificial intelligence to conform to the style rules of scientific journals. It seems that the .eps files have not incorporated and so all the words and the numbers come out in the form of vectors and therefore cannot be easily changed in artificial intelligence. I tried to use the pdf files exported from sigmaplot and for whatever Reason didn't let modify me them at all. My question is, is there an easy way (post export of sigmaplot) to get AI to recognize text as text? Or, is it something that needs to be done in sigmaplot before exporting?

  Very much appreciated.

  I just talked to another author, and what you want is in the lower right of the dialog box options export of Sigmaplot. Check the box to make the conversion of PostScript fonts instead of convert text to curves.

• EULA question... What do mean trade secrets? I don't want to break the rules.

  Hey;

  I'm sorry, I asked so many questions lately and thanks to everyone who helped me. The Dreamweaver EULA says that you cannot expose trade secrets. I have no idea what it means. If they mean their ajax or php coding... Well it is incorporated into each Web page made with their software?

  Are they referring to the criminal who type show and boning to know what makes the program tick? I don't! I hate people that do. It's the prison worthy in my book.

  Any info will help this topic so I don't break this rule very oddly.

  Don't know what version of this EULA, you are looking at, but the only reference to trade secrets in the CS3 and CS4 EULA is the following:

  Structure, organization and code of the software are the valuable trade secrets and confidential information of Adobe Systems Incorporated and its suppliers

  I am not a lawyer, but in the layman of the terms which means: "create a Dreamweaver clone, and our lawyers will have a field day." In other words, no reverse engineering.

  There is no secrets in HTML, PHP, CSS, JavaScript, etc. code generated by Dreamweaver. It is yours to use.

• All my messages on my iPhone were mysteriously deleted after I restarted - is it possible to sync my old backup iPhone with my iMessages on my Mac?

  Hello!

  This past weekend, I noticed that my Messages app acted strangely on my iPhone 6. Accordingly, I turned and turn it on again and noticed that all of my posts have disappeared. I then did a hard reset and turned on - still no messages.

  I have my settings to keep my messages forever, what really saddened me to see all of my messages disappeared. In any case, I'm about to restore my backup iPhone on a new phone (6 s). Luckily, I backed up my phone the week last before my messages disappearing.

  I understand that when I restore a backup, everything that happened on my phone since will not appear. However, I have also the Messages on my MacBook Air app, when kept all my messages before and after the mysterious disappearance on my phone. Once I have perform this restore, I was wondering if it is possible to synchronize in any post-restore on my laptop to my phone messages.

  Thank you!

  Hi masizh,

  Congratulations on your new iPhone 6 s! I understand that you want to synchronize the restoration of post messages on your Mac Messages app to your iPhone 6 s. If these are the iMessages, your new device needs to load the entire conversation once you send or receive an iMessage from the recipient. SMS messages may not work in the same way, however, you can contact your operator for support with text messages.

  To continue to have your Mac with your iPhone SMS sync, don't forget to implement continuity with your new device.
  

  If you have an iPhone, the SMS that you send and receive on your iPhone may appear on your Mac, iPad, and iPod touch as well. You can then continue the conversation from any device is closer to you.

  Set up SMS and MMS messaging

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

  

  Please use the Apple Support communities to post your question. Enjoy your new iPhone!

• Where are my rules of mail under macOS Sierra?

  Hello

  I lost all my rules of mail after upgrade to OSX 'El Capitan' to macOS Sierra.

  Appears that the rule of 'Apple News' as shown in the image below.

  

  Any help appreciated.

  Thank you.

  Rule files are stored in MailData folder in the Library/Mail/V4 of the user folder. Depending on what OS version you had previously installed, you can try to restore the files from a backup rules. Mail was listed in the folder V2 or V3.

  The rules are stored in a list of properties to:

  ~/Library/Mail/V4/MailData/SyncedRules.plist 

  Abandonment of post

  Restore the plist file

  Restart the messaging

  You will need to re-enable each rule. Check the destination file as well.

  Library of the user to see the

  The user library folder is hidden by default. In the unhide: select the Finder in the Dock. Less go in the Menu bar > hold down the Option key and you will see the library.

  Find the library user folder

  http://www.takecontrolbooks.com/resources/0167/site/chap11.html#FindingtheUserLi braryFolder

• Use the rules of mail or rules of Icloud or both?

  Which is better to use, rules of mail or Icloud mail?  If I create an e-mail folder of the Icloud on my Mac account it automatically appear in the Web page for Icloud but rules written on my Mac are not repeated in the page rules to Icloud.

  any advice?

  Thaks keith

  You can write rules more substantial in mail on your Mac, however if your mac isn't on you can end up with junk mail goes somewhere else until she is active, this behavior can be avoided by writing rules to iCloud.com.

  The choice that is best for your needs.

• Is it possible to create a rule for mail Search mail?

  I am trying to create a set of rules that would allow already read messages in folders by year. I can quickly find e-mail a year in research, it would be nice if I could create a rule right out of the research. I don't see this feature, but how can I create a rule which will find all the emails for a given year, and move them to a folder?

  Rules are usually set up for actions that are make again and again. What you describe will be just once, right?

  Do a search for the year you want, select all results, drag them to an appropriate folder.

• Table assignment 'rule' in Pages

  In the Pages, I have a table. Some cells are for opening numbers. How can I dictate a "rule" so that when a negative number is entered, he appears in italics. ?

  Select the cells > sidebar > cell > conditional highlighting... > add rule > less than 0 > > change red fill the italic > fact

  I didn't know that I expected.

  Peter

• The 'Reply To' field can be used in a Message rule?

  You appear not to able to search the Reply To field as part of the construction of a message anti-spam rule. Did I miss something - or could this feature be added to TB as soon as possible.

  Hoping this will help me nail a lot more spam I receive. Thank you very much.

  When you set up a filter, you should see a personalization option, where you can configure to filter on any field in a message header. Take care to study the source of certain messages first understand exactly what format it uses. "Answer to" appears as Reply-to:, so that you can add a custom field for answer to (without a colon).

• How to perform a soft reset rule soas can I open without download?

  the default value of the system is gone - and now the rule seems to be:

  download all email or system db attachments when clicked on...but i would like to have the option to open attachment /view without downloading/saving file. I would like to reset - so i have a choice.
  

  See this article:
  https://support.Mozilla.org/en-us/KB/applications-Panel-set-how-Firefox-handles-files

• Mac and Action Delete mail rules

  I use Mail 9.3 with El Capitan 10.11.6 and by mistake, I created an automatic e-mail rule that removed all email in my Inbox. This was due to accidentally clicking on the "If the following RULES are respected", instead of ALL. I got the error after about a week and have set.

  Is anyway to retrieve these messages that were deleted by this faulty rule? I looked in the trash and don't see some messages that I know have been sent to me during this period. Where will the messages that are affected by the "Delete" action in an e-mail rule?

  I tried to do a search in mail, Spotlight and Finder, but did not find the mails that I know have been sent to me while this flawed rule was active. Thanks in advance.

  If you do not have a backup of them, then they are gone. I you use IMAP mail, then once you delete a message it will be deleted from the server and are gone forever. How long that no matter how deleted mail grab is linked to your options of certain behaviors of the mailbox.

• Why Tweets incorporated on news sites appear only in the empty boxes?

  Tweets incorporated on news sites appear only as empty boxes in Firefox, but not in Edge: it of a fairly new problem and can have coincided with the upgrade to Windows 10.

  Please try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Rules of CSS in Firefox Inspector - suggestions/advice

  I have a problem with the Inspector in the Firefox browser. After some time of use, in the 'Rules' tab, system won't show me suggestions of CSS syntax. After the passage of the Inspector and, everything returns to normal, but... once again... after a few moments, the system stops showing me indications of syntax.

  The latest Edition of Firefox developers fixed this bug.