N/A updates-how disable?

Similar Questions

• How to enable windows updates? Error: 0x8DDD0003 - Windows Update was disabled by your system administrator.

  Original title: how to enable windows updates?

  I get an error 0x8DDD0003 that indicates the windows updates are disabled by the administrator and the windows update does not appear on my menu start / all programs. The Microsoft Knowledge base offers a solution type gpedit.msc in the run, but the system does not find this file.

  Hi EPLER, MICHAELC

  (1) do you use the computer as an administrator?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  (4) are you referring to the following Microsoft article?
  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  It is sufficient to indicate the complete error message you receive.

  You can follow all the steps mentioned in the article (KB316524) above that solves this problem.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Windows Update was disabled by your system administrator

  I was playing with a system configuration utility and decided that I didn't like it so I uninstalled. Several days passed before I noticed something wrong. Now my Update window buttons are missing from start / all programs/windows update and Internet explore/tools/windows update. When I do a windows update, I get a message error "windows update was disabled by your system administrator. If I set the automatic update, it works fine. I preferred to do windows update manually, so it don't interrupt me wile I do something. I've been in contact with the software support and they tell me to do the antivirus scans. I ran malwarebytes, found nothing. Kaspersky found some problems and clean. I've been in touch with tech Kaspersky forum and they give me a certificate of good health. No two seem to be much help to solve the problem.  I can't know this, but I think not what what Kaspersky found in my firefox cache caused this. Can you help me solve this problem?
  Thank you
  Windows XP Pro
  Internet explore 8
  Also I'm logged into an administrator account

  Hi Pumpshot,

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  You receive one or more error messages when the system administrator disables Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/326686

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Windows updates is disabled, error 0x80072efd

  Separated from this thread.

  Hello Gerry, I ran this troubleshooting and got again identical to the last triple error 0x80072efd, after that I restarted Windows Update is disabled and updates check still keeps for ages. Likewise, I can't check for any update with Windows Defender. I already checked the internet connection and all is well. I even can not install updates manually because it always shows windows update install updates on pc...

  Original title: error 0x80072efd

  Windows Update error 80072efd

  http://Windows.Microsoft.com/en-GB/Windows/Windows-Update-error-80072efd#1TC=Windows-7

  In the Article above, do the following:

  Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, refer to the documentation of the software publisher to see how to add these websites to your firewall exceptions list:

  http://*. Update.Microsoft.com

  https://*. Update.Microsoft.com

  http://download.windowsupdate.com

  If you still have a problem please restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I look at the original, it says version 2.2.2 is updated, how can I get version 3?

  I look at the original, it says version 2.2.2 is updated, how can I get version 3?

  Hello

  You must first upgrade your iPhone to iOS 10 (do not forget to make a backup first):

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

• How disable us the "almost complete iDrive" notifications in Windows 7 Professional?

  How disable us the "almost complete iDrive" notifications in Windows 7 Professional?

  IDrive is not an Apple product, contact the iDrive and ask them.

• you want to watch netflix on my tv but the sound telling me that I have to update how can I update my TV

  you want to watch netflix on my tv but the sound telling me that I have to update how can I update my TV

  How to upgrade sony TV

• Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Hi, can someone help me to disable a user especially wifi?

  Hello

  Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Because I gave the WiFi setting for the particular user who uses more bandwidth. So, I need to disable his WiFi without his knowledge

  I need help on this

  Thanks in advance

  Waiting for a good and simple suggestion

  Change the WPA2 password on your wireless access point and tell them what it is.

• Icon that automatic update is disabled

  I have a small icon that says automatic update is disabled. Click on it to turn it on, it says cannot turns a from here go to the control panel. To the comtrol Panel it says its on. Happened earlier, had to do a complete reinstall OS. Any body know an easier way? Windows XP with a great anti virus and Kapersky.

  Hello

  1. what version of service pack for Windows XP is installed on the computer?

  If it's Windows XP Service Pack 2, you can follow the suggested procedure.

  I suggest you try the procedure described in the link and check if this is useful:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

  Note: I suggest you run any antivirus at the same time, running two antivirus at the same time will conflict supremacy right from the time the antivirus.

  I hope this helps.

• Error: "automatic updates is disabled.

  Original title: automatic updates

  Every day I get a message telling me that the automatic updates is disabled. But when I go into Control Panel, it says that it is on. I was not do automatic updates. I suspect this is related to a virus/malware incident a couple of weeks - began just after. I installed FixIt 50362 - no change. Ideas?

  Hi conwal,.
   
  -Can remind you to make changes to your computer after that this problem started to happen?
   
  Follow these methods in the order:
   
  Method 1: Run a scan on your computer online.
  Microsoft safety scannerallows you to do the same thing.
   
  Method 2: Try the steps listed in the article below:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

• Windows updates is disabled and I don't know why. I suspect that McAfee.

  original title: automatic updates

  Have Windows XP. Have McAfee. Windows automatic updates is disabled. Do not know why. Have tried everything turning. Any ideas?

  Go to control panel and click on Administrative Tools

  Now, double-click Services and find automatic updates.

  Make sure that the status is (road) and the Startup Type is (automatic). If this isn't the case, then double-click on and difficulty.

  Good luck

• I get an error 8024800A code when you try to install this update how can I fix this (definition 1.151.666.0) KB2310138

  I can't download this update, how to fix

  Hi Kelly,

  Method 1: Install the latest Microsoft Security Essentials definition updates.

  https://www.Microsoft.com/security/portal/definitions/howtomse.aspx

  Method 2: Perform the steps from the link below and see if it works.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Warning of Chkdsk.
  
  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Good day!

  Answer please if you face concerns.

• Windows Vista Basic: Automatic update is disabled.

  Automatic update is turned off, trying to activate I get a blank screen. Also, when of the editable opening / Windows Update I get a blank screen. The only thing that appears is:! #elementmoduleheadertext #.

  #actionCustomInstallImportantText #.
  #actionCustomInstallOptionalText #.
  But all this does nothing...

  Fix Microsoft, he said: the problem is solved, but it is not.

  I tried to remove the service Pack2 to update to reinstall but it always fail to remove and restore to the previous settings.

  Everything clean and tune up programs see this automatic update is disabled but not can solve my problem...

  Hello again,

  All your suggestions did not help, but when I put the PC in the language of owners with Vistalizator, the problem has resolved.
  Maybe the problem wasn't there until I changed the language of computers, but it's still strange that the problem came up, then just because of language change.
  Anyway, my problem is solved and I thank you for your time.
  Have a great day and thank you, Sammy.

• SP1 update has disabled the startup. Please help (error 0x8007000E)

  original title: SP1 update has disabled the startup. Help, please

  I ran the upgrade of windows (84 files) and restarted the pc, checking upgrade again and he said updated service pack 1 or SP1 so I start making level and after a long time its still shows the installation but the icon in the lower right shows 100% so I clicked on cancel and then restarted the pc.

  Now Im getting a Startup Repair error box that search startup errors but says "Windows cannot repair this computer automatically. I can click on 'Finish' or 'Cancel' if I click on end it shuts down the pc if I click cancel it reboots the pc. another box pops up that says "Startup Repair cannot repair this computer automatically.
  My options are 'Send info on this problem (recommended)' or 'do not send' if I click it scans a second and then the box goes away leaving the 1st box of error described above.

  I tried to hit F8 and using 'repair your computer' this is for me the box of system recovery options. Sign in with my user name and password to choose a recovery tool.

  • Startup Repair
  • system restore
  • restore complete Windows pc
  • Windows memory diagnostic tool
  • command prompt
  • Recovery Manager

  I tried startup repair, but get the same message as above.
  I tried the system restore (which does not affect any of my files, documents, etc..) Then he said: choose a restore point that I want to use, but the only option is the 31/05/2011 install Windows Vista Service Pack 1... then I go ahead and try it and it says it will restart my pc and apply the changes. It initializes, file restore, then a box pop up saying system restore has failed. has failed because of an unspecified error. Not enough memory is available to complete this operation. (0x8007000E)

  So I try here this forum...
  Question: Lets say there's someone who can get my pc back to normal... what I need updated SP1 and SP2?

  Hello

  Not having the system restore, you can try a different restore point and check. If the problem persists, then you must try a startup repair and system restore boot from the disk Installation of Windows Vista.

  You can try to disconnect all the external devices (except keyboard and mouse) and tries to boot from the disk and check.

  For more information, consult the following link:

  What are the system recovery options in Windows Vista?

  You can also check out the following link and check error 0x8007000E

  Common causes and solutions to the problems of backup, System Restore and computer backup

  Hope this information is useful.

• Automatic update is disabled

  I have win Vista. The automatic update is disabled. I have run services and change the service to start automatically and accepted... but I reboot machine tha... .service disable automatic, new update

  Thank you

  Hi Npereira,

  This can occur if your computer is infected or even when the windows update service is damaged for some reason any. Let us try the following steps.

  Step 1

  Reset windows update components. Open the link given below and click the fix button, which will automatically reset the windows components update.
  http://support.Microsoft.com/kb/971058

  Step 2

  If the problem persists even after the virus scan so you can check if the background intelligence service is started.

  1. click on Start, type services.msc in the start search box and press ENTER.

  2. double-click on Background Intelligent Transfer Service.

  3. in the Startup type , click Manual, and then click apply.

  Start the windows update service, and then restart the computer and check if the problem persists.

  Reference: http://support.microsoft.com/kb/959894

  The result of the POST back .

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]