N200 bios flashes-> hard drive not found

Similar Questions

• Error retrieving Tecra A6 (hard drive not found. Error: F3E1000001)

  Hello
  I want to recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the recovery

  Menu (when booting from the recovery DVD) just rebooted my laptop and every time I try this (very simple procedure) this

  happen again.
  That's why I tried to get it back to Win XP > Toshiba Recovery Wizard... in the first DVD in the 'BIN' folder there isn't

  a "RECOVERY.bat" batch file when I run this file will open a CMD window and checks are willing (and then the

  following text is displayed in the CMD window :)
  "
  Verification of DMI
  Verification of RAID
  Failed to initialize the raid class.
  Check the HARD disk
  End of the error
  "
  and a new window opens with the following text:
  "
  
  an error has occurred.
  Error: F3E1000001
  Hard drive not found.
  Please press [OK] to turn the computer off.
  "
  If I press OK the any immediately goes down (without shut down windows) and I have to restart.
  Also my laptop works properly my recovery DVDs sounds great, I want to just recover my system because of the speed more

  in Win XP.
  Maybe there is a new firmware for my HARD drive or an update of the BIOS so that the laptop could detect my HDD.
  In Device Manager, my HARD drive is: HTS541010G9SA00

  Wait a minute: you try to run recovery as OS installation?

  The recovery procedure must be on path:
  Turn on the laptop and press the F12 key
  When the bootable devices appear put the first media for recovery in the optical disc drive
  Choose CD/DVD media from the list and press ENTER
  Follow the menu on the screen.

• Help format/reinstall, HARD drive not found

  Dell Dimension 8400 my brother got a horse of Trojan/bot out there and I had to do a thorough cleaning due to not being able to locate the infection and the internet company kept cutting off the Internet.

  I first tried the start of the disc and using disk relocation provided by Dell. He said "this part of the Setup program prepares Microsoft Windows XP on your computer. To set up Windows XP now, press ENTER. To repair a Win XP... Press R."

  I chose the first option and get the message: "Setup has not found hard disk units installed on your computer." And the only option (F3) is to stop smoking.

  I made a diagnosis of HD and it passes. Looking in the BIOS, it is recognised as disk 0 and also in the startup list.

  I decided that maybe there was a lock on there so I used DBAN to run a DoD wipe/format and clean the drive. So now it has to be completely formatted. I also jumped into a boot disk and performed a fdisk, but he doesn't recognize and create a partition of 8 GB to 160 GB. Hmmm, something's not right.

  Again, I'm trying to reinstall with reinstall drive and a full copy of XP that I have and you still get the "hard drive not found" error.

  The FAQ does not seem to cover this issue, but I could easily looking in the wrong places. in any case, I want to just wipe the drive and reinstall. Any suggestions?

  Message edited by Deboad on 10/25/2008 17:36
  
  

• Inspiron 1545 - hard drive replacement, new drive SATA not found 'internal hard drive not found ".

  Hi all

  I'm trying to install Win7 in an Inspiron 1545 with a new SATA hard drive that has been purchased. When I insert the disc, I get "Internal hard drive not found." I checked the drive does not appear in the BIOS, I already tried to reinstall the drive several times. In addition, I tried to load the chipset drivers, drivers SATA, etc. of the Dells, the Reader site still does not appear in the installation of the OS when starting on a DVD or in the bios.

  I do not think that there is a problem with the new drive, I plugged the new drive in another Dell laptop model and it recognizes the drive in the BIOS, also I can always start on the previous in this laptop without problem hard drive when I plug it in.

  Is there a specific driver, etc. should I use for the drive to be recognized or have other thoughts?

  It's strange - either the new HDD has a rare compatibility with your embedded controller problem (I use a 500Gbyte in my 1545 no probs)) or it is a mechanical problem. I look at the physical dimensions and compare your original hdd by the new. Watch the video (even if it's on a 1525 (similar to a 1545) and a SSD hard drive)-go to 02:20

  cs_setInnerHtml ('video_a3a3072d-f294-4bec - 85b 6 - 1eefb7b19e68', ");

• Hard drive not found - installing WXP on Equium P200

  Dear all

  I have an Equium P200 with Vista. I decided to remove vista and install windows XP. I put the XP and it goes through a verification process, I guess. At the end of the audit and after I pressed the button to install XP, I get the message "hard drive not found on this computer. Help me with as I want to install XP, my laptop?

  Concerning
  REDA

  The XP operating system could not find the HARD drive because you have not installed the Intel Matrix Storage Manager.
  It is a SATA driver is needed t install the XP.

  During the operating system installation process, you will need to press the F6 key to include the external USB FDD drive SATA driver.

  It you don t have a USB FDD drive then nLite software could be a solution.

  PS; Search this forum for similar topics, because this has already been asked several times

• Hard drive not found error

  Hey everybody,

  My HP Pavilion G6 - 1164sa is coming up with an error "Hard drive not found" at the start up. It also makes a clicking sound. have you tried another hard drive to an old laptop in its place and the works, but because it is not the correct drivers installed for this model most things do not work. Need a solution to this? can I order a new hard drive for hp with all the drivers installed?

  Your drivers are posted on your support page > HERE

  You can order a hard drive at HP, but it will be a hard drive Virgin, as well as a new hdd retail except at much higher prices. I would like to replace the hard drive with a > hdd retail.

  If you plan to use recovery disks to reinstall Windows & software/drivers have one that is at least as large a capacity than the original, may be larger, but not smaller. If you have not written a set of recovery discs, you can usually order from HP for a small fee.

  If you can read the Windows 25-character license key attached to the bottom of the laptop there is possibility to download an ISO file, burn it to DVD and install Windows. Then you need to download your drivers on the support site. (Any size hard disk could be used with this option)

• X 51, internal hard drive not found

  SOMEONE HELP ME PLEASE

  I tried to start my Alienware X 51, but all by starting it keeps freezing and rebooting until it came to this «internal hard drive not found press F1...» Etc.  I don't know what to do someone out there please help me

  Looks like the drive may be failing intermittently. If under warranty, Dell will be replaced. Contact Dell support in your region (Singapore).

• UCS C240 M3 "hard drive not found."

  Hello world.

  I have a UCS C240 M3 for a demo with the following equipment.

  UCS C240 M3 SFF2 1x8GB 1xE5-2609 ROM55 2x650W SD RAILS

  SMARTNET 8X5XNBD UCS C240 M3 S2 Server-SFF

  E5-2609/80W 4 c/10 MB of 2.4 GHz Cache/DDR3 1066 MHz

  Rank of 8 GB DDR3-1600-MHz RDIMMS/PC3-12800/dual / 1.35v

  Power cord 250VAC 10A CEE 7/7 plug EU

  Shutter Panel UCS 2.5 inches HDD

  Heatsink for UCS C240 M3 Rack Server

  Standard height PCIe dispenser for C-series

  Low-profile PCIe dispenser for UCS

  Power 650W for C-series rack servers

  Embedded SW RAID 0, 1, 10, 5 8 ports SAS/SATA

  2U Kit rails for the UCS C-Series servers

  16 GB SD card module for servers C240

  In addition, these HD.

  300 GB, 6 GB SAS 10 K RPM SFF HDD/sled hot plug/mounted disk x 2

  I pluged the HDs to the Bay of 1 and 2, but the system says "Hard Drive not found" so it doesn't allow me all RAID configurations.

  Each LED on the HD and the server is green so aparently all is ok.

  The firmware is 1.4 (6)

  Any ideas?

  Thank you.

  Best regards

  Hello

  Please check if the cables are connect integrated RAID controller and the appropriate ports on the back plane.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C240/install/RAID.html#wp1017441

  What happens when you start as an option ROM RAID controller? What is it recognizes hard drives?

  Padma

• Alienware x 51 try re-installing drive HARD drive not found

  I have an Alienware x 51 which caused me a few problems. When I turn on my computer, it shows me a black screen with the following text: "drive hard internal not found to fix this problem, try reinstalling the drive. No bootable device. Strike F1 to retry boot, F2 to enter setup Menu, F5 to enter PSA"

  F1 restarts and returns me to this screen

  When I press F2 it sends me to the installation Menu, once if I hit the ESC key and exit without saving my computer starts and allows to connect me, etc.

  I tried reinstalling the drive and finally hit a brick wall. Any thoughts?

  Hello

  Have you tried to run the PSA test? If this isn't the case, please do so to confirm if you receive errors. Also check in Bios (to access the Bios, the tap button F2 when starting) in order to confirm if the drive is detected it.

• Aurora r4 internal hard drive not found

  I went to turn my computer on Thursday and I received a message that says, internal hard disk not found, to solve this problem try to reset the player. No bootable device. Strike F1 to retry boot, F2 to enter setup menu, F5 to enter the PSA.

  I ran PSA and all the past. I removed the internal battery to see if it would help because it worked for me in the past and it didn't this time. I don't have another hard drive.

  I also had to wipe the disk a few months before what is happening. I kept getting blue screens of death, which I thought that it was caused by a virus, the virus has been removed, reset the bios a few months after the virus has been removed I kept getting the blue screen saying that I would need a new motherboard but did not. It worked fine until it starts to me don't give no boot device.

  Any help would be greatly appreciated, I don't want to have to buy a new computer

  Both worse thanks for all the help I got it to someone for repair.

• Alienware X 51 error: internal hard drive not found...

  Hello

  Since a few days I am getting an error on the screen when I start my computer. This is the error:

  Internal hard disk not found
  to resolve this problem. try to reinstall the drive.
  No bootable device.

  Strike F1 to retry boot. F2 to enter the Setup Menu. F5 enter PSA.

  If I go into the PSA I'll get boot problems. It takes like half an hour. When it's over my computer will restart, and then boot normally I can connect and see bureablad etc. But when I shut down my pc and start it again the next morning it will start with the same error. and it happens every day.

  Many people say that you must change the start Mode of inheritance in the UEFI. But the Boot Mode was already on the UEFI.

  A photo of the boot:

  

  I hope someone can help me.

  -Jeroen

  How did you get windows 7 reinstall and make it work?

• Satellite L500-246 - HARD drive not found in BIOS

  Good afternoon

  My problem is that I have a Toshiba L500 - 246 to oblivion, put a password on Windows 7 and now, don't remember.

  I decided to start over and delete the entire computer. I clean the fan, I put thermal paste to the processor and the graphics card and decided to delete all partitions and create one.
  Want to boot from the DVD, I went into the BIOS to change the BOOT boot, and on the first screen, I get the following message: "HDD / SSD not installed '." I changed the settings in BIOS, but still the same.

  When I enter the Windows 7 DVD, you read me well until the window that says he needs the control disk, and in this window, I don't see any disk. I tried with two SATA drives, and I get the same message.

  Put his ear on the hard disk drive to start the laptop computer is the sound characteristic of light, but still do not leave anything in the BIOS.

  Now, enter in the browser to find the driver, I get the following:

  A X startup disk: 30 MB of capacity

  The USB flash drive appears as drive me C:

  And finally, I get the CD in D drive:

  Why could this be?
  Why do I get the USB as a C drive?

  Thanks and greetings

  Your ad is really confusing.

  First, it would be useful to know if the SSD or HARD disk drive is listed in the BIOS (BIOS first page)
  If his list, the HARD drive is OK and follow along you with the installation of the system
  If it is NOT listed, you need to replace the HARD drive

  Lets assume, the HARD drive is OK and you have started the installation.
  During the installation of Windows, you will be asked to add the SATA controller.

  You will find on the page of the Toshiba UE driver the Intel Rapid Storage Technology driver
  This driver contains the SATA files that you add during the installation of Windows.

  Hope this helps

• XC-600 of hard drive not found by BIOS

  My XC-600 get an error 'no boot disk was detected or the drive failed' at startup. In BIOS boot options, under the 'hard drive priority"I can't find not all readers. I install win 10 USB that I can use to boot and, for example, to access command prompt. Cmd, I can still access my hard drives (two) and their content (I tried running some programs cmd etc.).

  I recently added an SSD HD and made an installation clean victory 10 on the drive. Everything went well for a few days. Then I completely erased the 1 prior to disc (all mysterious partitions of it) to make a pure file storage. I also did a few random changes how to remove the old version of the OS to msconfig (https://www.reddit.com/r/Windows10/comments/3gwaq6/two_volumes_on_startup_volume_6_and_volume_4_why/... I can't tell exactly after which change I rebooted the machine so that it has not (as described in the 1st paragraph), but something must have gone wrong and I doubt it would be material. I tried all combinations of drives and SATA ports and none of them work for that BIOS recognize the drives or the system would boot. I tested also change the setting of start secure in the BIOS without success.

  Any help would be appreciated!

  Probably you have removed the EFI partition (if your BIOS is set to UEFI) or the MBR partition (if your BIOS is set to Legacy/launch MSC).

  When you installed windows 10 on the SSD, it read the EFI partition on the 1 TB HARD drive and now the score disappeared.

  try to run the startup repair under Advanced options with the 10 Windows installation media.

• Dim 9200 does not start; hard drives not found

  I have a Dimension 9200 with 4 GB of RAM and two Seagate Barracuda 7200.10 250 GB hard drives that works well for 8 or 9 years.

  However, he has recently stopped start and displays the following message:

  Drive 0 not found: Serial ATA, SATA-0

  Drive 1 not found: Serial ATA, SATA-1

  Strike F1 key to continue, F2 to run the Setup utility.

  In addition, on the homepage of DELL for this message to appear, the splash remains for about a minute after the progress bar reaches its full potential. Meanwhile, the SATA 0 drive emits a continuous clicking sound (something like an old mechanical clock every second ticking).

  Diagnosis initially 2 and 3 remain on (failure possible floppy or hard drive according to the manual) until the machine beeps and moves out of the start page of Dell to the message above. Exactly at this place, diagnostic light fire 1, 2 and 3 (manual says another failure).

  I reinstalled the two HDs that made no difference whatsoever.

  I also removed the cables power and data from disk SATA-0 and rebooted. This time, no delay was observed when the splash page reaches the end of its race progress bar, no noise has been heard since the SATA-1 remaining drive but the same message above appeared once more, as did the same 1, 2 and 3 diagnostic lights

  I also put drive SATA 1 on SATA 0 and connected the power and SATA-0 data cables. However, the behavior is still the same (note that I use the Grub bootloader and it is installed on SATA-0, then the other drive is not bootable).

  I also started from a USB key containing the GParted partition manager. It starts fine, but the single disc he sees is the USB. Or the SATA drives are recognized. It is worrisome.

  I bought a new Seagate Barracuda 7200.10 with 250 GB which should arrive later this week. However, I'm starting to think that the problem drive is not my only problem (and of course, that's what the 1,2 and 3 diagnostic lights would seem to indicate).

  I should be grateful if you would for clues, opinions or suggestions.

  Thank you

  Paul

  Have you tried to enter the bios Setup, and then press alt + F? Save/quit it can detect readers.

• Re: Porege S100: HARD drive not found?

  Hello world

  From the start of my laptop, it was suddenly unable to load anything. So I checked the bios, but he always saw that there was a 80 GB hard drive in my laptop. I restarted pressing 0 to load the recovery partition, but nothing happened. I resorted to a windows 98 CD layout so I could use the BACK, but he told me that it was not any hard drive to install anythign on! So I tried with an XP installation cd and I get the same message, it wasn't hard to install on drive.

  I need to replace my hard drive?

  I use a toshiba Portege S100 if it made a difference. I know that this example is using a RAID configuration so is possible that I need to install RAID drivers for xp or Windows may be able to find it?

  Thanks in advance for your advice

  Danh

  > I know that this example is using a RAID configuration so is possible that I need to install RAID drivers for xp or Windows may be able to find it?
  You are right. You must install the RAID driver during execution of the XP installation.

  The RAID driver must be inculcated from an external USB FDD drive.
  During the installation procedure, you will need to press the F6 key to implement the RAID driver.

  The RAID driver can be downloaded from the page of European driver of Toshiba.

  Good bye