N500 BIOS necessary help/walkthru

Similar Questions

• Satellite 1900-102 BIOS necessary

  After being hit by a rather nasty virus (long story, but my son went online with the firewall disabled) my bios on my satellite 1900-102 has been damaged and I can't re-boot, also some programs no longer work. Where can I get a download of the Bios for my machine... help!

  Hello

  It s very rare that the BIOS is damaged after the attack of virus.
  But however the BIOS you will find on the Toshiba site.
  http://www.toshiba-tro.de/subpage/BIOS.html

  Please check also the update BIOS procedure because wrong procedure can damage the motherboard.

  PS: you should first try to recover the operating system before starting any procedure to upgrade the BIOS

• Presario CQ57: Presario CQ57 Bios necessary administrator password!

  Hello, I need the administrator password to access the bios on my laptop, the code I got after that 3 unsuccessful attempts is 93062917. Any help would be greatly appreciated, thank you!

  Hello

  Try the code below

  22940339

  Please use the password given to you in the previous post and follow the steps below:

  1. use the posted above unlock code to access the BIOS

  2 disable all passwords that are enabled

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

  6. then exit the BIOS saving & output option to save the changes.

• Latest version of the BIOS necessary for a Tecra A3X

  Hello
  I have a Tecra A3X (number of product PTA3XE-00NUB4) and I'm looking for the latest bios update.

  On-site support world-wide, there are updates to v2.70 revision v1.4 (for series S2/A3: ts2_a3v27.exe), but when I try to use it it complains about unsupported hardware and that it does not level (I tried the direct upgrade from WinXP and cd burning methods).

  On the french support site there is only a revision 1.4, which is the only one that has worked so far.

  My laptop was bought for the Luxembourg, is the A3X model a different device than mentioned on the support in the world?

  Thanks for any help...

  Hello

  Don t know which site you mean saying support in the world but the Tecra A3X site is without doubt a European model for laptop and you must use the page of European disk from Toshiba for the driver and BIOS download.

  I mean this page:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  There is only one a BIOS v1.40 - WINNER.
  So if you want to update the BIOS, you should use it.

  Concerning

• 15 - af161ca: password of bios necessary for 15-af161ca

  Hi, can someone help me with password bios, the deactivation code is 92916817

  Thank you

  Hello

  Enter 23674239

  Kind regards

  DP - K

• 23 - d160qd envy: new motherboard, now empty screen and 6 beeps. Cannot change the legacy BIOS. Help!

  Good ladies and Gentlemenof the Interwebulars, I hope someone can shed some light on my situation.

  Walked down one day to see that my computer would not start. A diagnosis which in a bad power port. Got a new motherboard because after desoldering (or that's what I tried to do) I realized that it was small to (re) welding in and I could not find the right part to reorganize.

  so I got a new motherboard. The number replacement part direct. Barefoot on my floor wood and ESD wrsitband on, I put in this bad boy. Double and triple check things and connections. Go to hit the power button and I get 6 beeps and 6 flashes of correspopnding of the powerbutton. The system does not appear to be on, fan is running with the other sounds of starting and running sounds, but I have a white screen and orange electric button. If I tap CTRL + ALT + DELETE it will restart and begin the process again. The 6 beeps by HP standards denotes missing graphics / card error. My original motherboard had a built-in graphics card so I thought that the same new part number card mother too. Obviously not. so I had a Geforce 2Go MXM graphics card update with heat sink. Barefoot, wood floor, bracelet ESD, thermal paste and turn it on to hear... SIX BEEPS AND SCREEN WHITE.

  After Googling around, some people say that I have to enter the BIOS and change boot legacy and fashion out of the UEFI mode that's killing me right now. I have join and would completely if I could see my screen of the BIOS, or anything for that matter. I can not go back also to my other card because it will not feed. So my question; How to make or change the BIOS settings so that my computer will recognize a graphics card or internal graphic that should be on the new motherboard itself so that it starts?

  I need this computer for CAD work soon so I thought help processor i7, 8GBs RAM, Geforce card and touch screen to perform a generation of PC.  So if someone has a great idea they would projected upward on this post, I'd appreciate it. Thank you!

  Your computer is not posting, sound rather give an error message in the form of 6 beeps and red LED flashing, indicating graphics / video issue.

  You can never get into the BIOS of the device, if its not posting, not on a HP Desktop atleast.

  I recommend, you disconnect all components and fittings connected to the motherboard i.e. cables SATA, power cables, RAM, processor, heatsink, power supply and battery CMOS as well.

  Now, press and hold button power unit for a minute or two., with the power and everything is still disconnected.

  Then,.

  (1) Insert the battery CMOS back into its slot, install the processor and the heat sink, connect all cables power that goes to the motherbaord in the PSU and CPU and etc., less SATA cable and cable power to drive hard and Optcal drive and turn on the device, of course after you have connected the rear power cable.

  (2) check if the machine beeps and check whether it is 5 times.

  (3) If yes install a memory in the first slot (slot black), connect the monitor and turn on the power and check if there is no video output.

  (4) if so, connect the return which is always disconncted, to their respective locations and ports and turn them the unit on and get on with your CAD stuff.

  IF NO,

  2 options:

  (1) if the unit is still under warranty, call 1800-474-6836 and have a technician on-site visit your place and replace the parts needed for the operational unit.

  (2) or the motherboard you purchased could have been Dead On Arrival. Get a warranty replacement for the DOA mobo and re install a new Board of Directors.

  Good luck!

  Please click on the "congratulations, Thumbs Up" at the bottom of this post if you want to say 'Thank you' for helping!
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

• Recovery Bios USB help

  Hello Experts!

  My DESIRE Ultrabook 4-1046tx (2012 model) has a corrupted BIOS.

  http://support.HP.com/us-en/product/HP-envy-Ultrabook-4-1000/5269312/model/5274957/drivers?cc=us & LAN...

  1. I created a USB stick with HP UEFI support environment SoftPAQ. Transmission created HP_TOOLS of records (old/new/cureent etc.).

  2 downloaded BIOS (sp60574.exe)

  3 can help me is it you pls with what to do next (many approaches in the forum - phoenix of the use of tools or rely the.) FD file GOLD insydeflash automtaically installs).

  Thank you!

  If F2 does not mean that UEFI environment is corrupted. This is where a flashdrive HP_Tools have would be helpful. You can also download the softpaq to Diagnostics, run it and install on a flash drive. I've done it before and he will give you a diagnosis portable flash drive. See the following URL. It should allow you to fix the corrupted BIOS.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html

  I used winzip to decompress the softpaq BIOS as seen in a previous post, I did in your thread in the image.

  All you need is the ROM file with the .fd extension to the root of a usb flash drive empty of FAT32 formatted. Follow the instructions onthis web document.

  If I find more information about this problem for you, I will edit this post.

• HP 15-r030sq Notebook PC bios password help

  I have HP laptop computer 15-r030sq, I forgot the bios password, I can not enter. The deactivation of the laptop bios code is: 50917158.
  Help, please.
  

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy rods-...

• Latest version of the BIOS necessary for Satellite A10

  Hello

  Please I need help someone know what is the latest version of the BIOS for Toshiba Satellite A10 netbook.
  Thank you

  According to Toshiba support & download the latest version of BIOS page for your Satellite A10 is 1.30.
  You can find it on the download page of Toshiba?

• HP x 2 PRO 612 G1: PRO HP x 2 612 G1 BIOS locked - help

  I bought a HP opportunity x 2 PRO 612 G1 (Tablet PC) on ebay and the BIOS is locked. I want to update the BIOS to the HP last update but unfortunetly I can't update because I do not know the password.

  If anyone can help me that would be wonderful.

  When you enter the incorrect password there is no code, just a message telling you that you have and you have to press the power button to restart.

  Thank you

  HP_Eli.

  There is not generators of master password for ProBooks or EliteBook and most laptops class business.

  The Mydigitallife link will not work for your model. "It is not on the list. »

  Contact HP.

  http://welcome.HP.com/country/W1/en/contact_us.html

  I'm sorry.

  REO

• HP pavilion h8-1230: how to access the bios pls help

  How to access the bios and I got windows 7 but to give birth to windos 10 with the thing free upgrade I got Pls Help

  Immediately after pressing the power button to turn on to start by pressing the F10 key.

• HP MINI 1000: fatal error password BIOS please help

  Hello I got a mini HP for a long time and that you have not used in a while. I just got it on and asks for a password and I have no idea what is more.  The stop code was CNU90662MB

  Someone please provide the password so I can get back in and also how I even remove the password so that it does more wonder?

  Thank you

  CAT

  Hello

  Enter: e9lo1gg74p (to be noted that the 3rd character is a lowercase L)

  You can remove the need for a power on password as follows:-use the code above if necessary.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password (use the code above) and then the new password, simply leave this blank and press on enter - do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Kind regards

  DP - K

• Perhaps a BIOS need help problem

  So I have problems with my computer now and days where it crashes / blue screens, and he will give me options to try to recover my PC since the last accident, when I try to choose another option of recovering the BIOS itself it freezes my computer in this case, I see the 30 second timer it gives you and freezes as soon as I select a different option, or press "Enter". So I have to select the default option and wait for the timer to put end to so without issue arises. But I'm more worried, eventually I'll have other options by force and I discovered thanks to some research that the cause of my BIOS freeze could be maybe its updated. So I looked for my current version of bios and found is (American Megatrends Inc. 6.02, 21/07/2010) for my card mother-N-Alvorix-RS880-formfat (Alvorix) and I found this current version of (N-Alvorix-RS880 Motherboard BIOS BIOS update; Exit the: 2011-09-23) on the site, but knowing how some of these things may be, I'm worried that it might be a different motherboard BIOS and I can't turn my motherboard Clipboard. Can someone help me?

  I managed to apply it safely on my BIOS and it seems to have updated since a 2010 version of a version 2011 of the BIOS, and so far no problem, so I hope it's my fix, but I can't say until my computer decides to hit again from the BIOS recovery mode

• Aspire m3420 bios update help

  Hello. I'm trying to update the bios on my aspire m3420 so that I can run an evga gtx 750ti. Current BIOS is P01 - A1 on a mobo aahd3-vc. I tried to use the updates from the website of acer but after reboot, flash does not stick. Any help would be greatly appreciated.

  If your bios is P01 - A1, you as far as you can go. Notice P01 - A1 is not in the list of the Bios. P01 - A1L is, but this isn't your bios. You will also notice the size of the BIOS there are bigger than yours and the new Bios must be the exact size as yours to install.

• N500 BIOS update of brightness adjustment stuck

  I have a n500 4233-hg running windows xp and updated the bios from 6get17ww to 6get18ww in order to activate my hdmi port (Yes it has a port hdmi on the left side near vga output). After update hdmi works very well but lcd brightness hotkeys got stuck: by pressing fn + f10 or fn + f11 sails through 14 levels but brightness change only from low to high and again the lowest in the order (level 1 low 2 high level, low lvl3 lvl4 high, low level5 etc.) all Middle States lost... I downgraded to the previous version via the winphlash and tried other versions also backup file but the problem persists; any ideas?

  PS I had the ability to adjust levels of brightness as fair that the machine is switched on (of post); Info: bios version 6get18ww (1.09) bios keyboard this: 6gec19ww (1.08)

  Thank you

  Hey yigit, I found the solution it is a bit strange, but it worked: offline screen and inverter flex-cables from the motherboard, turned on, connected only cables inverter you press the brightness and voila! (switch off cable screen connect put all things together... )