NAC Guest server - time for questions

Similar Questions

• Migration to SQL SERVER 2008 for questions of Oracle 10 g.

  Hello
  
  I'm trying to migrate from SQL Server 2008 to Oracle 10 g and I end up with a few problems that I wanted to ask you some info about it.
  First of all, I followed a tutorial
  http://St-curriculum.Oracle.com/OBE/DB/hol08/sqldev_migration/MSSQLServer/migrate_microsoft_sqlserver_otn.htm
  and and in the latest version of Oracle SQL developer, I downloaded, I found not the Output of the Script of Capture of database load option.
  My first question is how can I add either this option or y at - it a new way to load the script to capture?
  Can I use the migration wizard and after all, I had the full message of migrating the application.
  When I tried to open my connectionss, he told me version 11.2 is necessary. Does this mean that developer Oracle SQL 3 only
  perform the migration of oracle 11g? And if I tried the previous versions, it does not support SQL server 2008.
  What should I do in this case?
  
  Thank you!

  The output of the Script Capture charge of database can be found in the tools of-> Migration section.

  You have already discovered the "create data base Capture Scripts" in tools-> Migration menu and you have run the script that generated the DAT files.
  Now click on tools-> option-> Migration migrate, choose your repository, add a project, and then on the next page you must choose between ONLINE and offline mode. When you use the DAT files, please choose the offline mode and add the * ocp file with the subdirectories that contains the DAT files.

  SQL Developer is able to connect to Oracle 10.2 db as well. Can you please be more specific about the second question and provide more details the steps that you did?

• time (for wsn 9791) in MAX server configuration

  Hello

  I need to set up a time for my gateway WSN9791 server in order to ger readings with timestamp of remote nodes. How can I do?

  I already checked this forum and other sources of information on this issue and has concluded that the time server is configured by using MAX under "Remote Systems > NOR-WSN9791 > System Settings" but I have not found any arrangement for the NTP server there.

  My system configuration is:

  -Windows 7 Professional

  -LabView 2013

  NOR-WSN 2013

  -MAX 5.5.0f0 of worm.

  -a WSN9791 gateway

  -eight knots of WSN3202

  concerning

  Flavio

  Finally, I asked the technicians support of OR who have come to find a solution.

  I report the message that describes the problem.

  ------

  Why can I not set a time for my NOR-WSN-9791 gateway server?

  It is a known problem in NI MAX 5.5 and 5.6 MAX OR. The time server option was not be displayed due to a change in the backend of the system settings page. Workaround to view the setting of the time server was created. The following steps will allow the option of time server OR 5.5 or 5.6 MAX MAX OR

  1. on your development computer, go to C:\Program NIUninstaller Instruments\MAX\UI Providers\DefaultRemoteUixml\ to C:\Program Files (x 86) and 64-bit windows \National Instruments\MAX\UI Providers\DefaultRemoteUixml\ for 32-bit windows.
  2. in the directory C:\Program Files (x 86) of Providers\DefaultRemoteUixml\ \National Instruments\MAX\UI, make a copy of the original mxrmcfg. DDPSystem.def.xml original-mxrmcfg file. DDPSystem.def.xml. this backup the original file to undo the changes.
  3. open in Notepad the file mxrmcfg. DDPSystem.def.xml

  4 replace the contents of the file with the following:

  
  
   
     
     
   
  
  5 restart NI MAX

  After you follow these steps, you will be able to set the time server on the NOR-WSN-9791 via NI MAX.

  ------

• Time series Question - how avg for children period but no parent

  I have a calculated account, trying to get the average to the level of the child of the period, but have the Parent period level make a right calc on the totals. My cube is configured like this:
  
  
  Period
  -Jan
  -JanWeek1
  -JanWeek2
  -JanWeek3
  -JanWeek4
  -JanWeek5
  Account
  -Hours billed
  -Revenue
  -Avg Houly rate = 'Recipes' / 'Billed hours' (I have time series data, the average value)
  
  My problem is that during the week level things are on average correctly, but at the level of the month, that is by taking the average of 5 weeks. How can I get if it just look at the total revenue for the month divided by the total number of hours billed (by having the weeks do everything an average?)
  
  Thanks in advance for any guidance.

  You probably don't need to use all balance of average time for this calculation. I suggest defining members in time balance zero, then label it as 'Dynamic Calc' and label it as "Two-Pass", ensure that the income / hours calculation after the period roll-up.

  I think that you would give the desired result.

• sbRIo synchronization with the SNTP server time

  Hello!

  I'm timing a sbRIo with a server time as described here:

  http://digital.NI.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43?OpenDocument

  I have a few questions:

  (1) what happens if the time server becomes inaccessible?

  (2) may source.sntp.address be specified as a name address to be rosolved by DNS? (It seems to me that if the name cannot be resolved, the Agency starts up in safe mode...)

  Thanks in advance for any response,

  Marco

  PS Sorry for the permutation (http://forums.ni.com/t5/Real-Time-Measurement-and/sbRIo-time-sync-with-SNTP-server/m-p/1951123),

  but the problem is very urgent...

  Hi Marco,.

  (1) if the time server SNTP becomes inaccessible, the cRio updates local time independently, from the last time value gets from the server

  (2) you're right, it does not work properly. The right way to express the source SNTP uses the IP address

  Kind regards

  Andrea R.

• Set the time for submisson of shape based on time zones?

  When a form is subimitted Eloqua assigns the Eloqua notifications server time (-5GMT) as a message of time. It's really annoying especially for messages of support, where the presentation time is critical for service-level agreements.

  Question: Is it possible to set the time of post with Java Script and if, how?

  The time of the default message cannot be adjusted, it will show always the time that the server received the presentation, in the zone servers (which is to the East).

  However, the use of javascript, you can have a hidden field on your form and apply a timestamp, using the local time of filers. With more complex javascript, you might apply a time stamp using the time zone of your choice.

• Re: Activation Server stopped for Creative Suite 2 and Acrobat 7 product Macromedia

  I agree wholeheartedly, it is no possible to treat a person who goes to $1500on the product.

  Branch to a new discussion.

  Jamesb25434196 I'm sorry you are facing trouble downloading the installation of Acrobat 7 files.  Acrobat 7.0 for Mac OS didn't include activation technology so is not affected by the activation server to stop.  You want to locate your original installation media and use your registered serial number.  You can find details on how to locate your registered serial number Acrobat 7.0 to quickly find the serial number of your Adobe product .

  If you choose to download Creative Suite 2 Premium, at the time of the purchase, the download may be under your account at http://www.adobe.com/.  You can find details on how to download purchased software titles to find downloaded Adobe apps and app files...

  We invite you to update this discussion if you have any additional questions.

  For a complete list of Adobe software titles affected by the activation server stop see Activation Server stopped for Creative Suite 2, Acrobat 7 and Macromedia... products

• Remote server time

  A simple question, I am sure that...
  When I connect my remote site (FTP server) I get the message of DW "DW cannot determine the remote server time. "Select newer and synchronize will be unavailable.
  This is probably to make the remote site to automatically determine which files have been updated etc, so I guess it could be useful?
  How would I just put?
  Thanks for any advice.

  Yes-she is used to synchronize and other site management functions.

  A possible fix - is your remote site defined at a higher level of private
  a folder that you do not have permission to write? This would cause dw to fail
  to write the XYIZNWSK file, it uses to check the timestamp of the file.
  Then open the FTP log by clicking on connect to will allow you to see what is causing
  the error.

  If your site files belong in a subfolder such as www or public_html or
  httpdocs or similar, adjust the definition of site for the premises and
  distance (using the host directory line in the remote info)

  > Probably it comes to the remote site to automatically determine files
  > have been updated etc, so I guess it could be useful?
  > How would I just put?

• Is there an impact on the database if we change the server time?

  Hello
  
  Our DB server time is 45 minutes before our application server. We have to reset the database server time. Is there an impact on the database if we change the synchronization of the server?
  
  Platform: Solaris
  DB version: 10.2.0.2.0
  
  bash $
  
  bash-3. $00 date
  
  Thu Apr 23 20:26:19 2009 IST
  
  bash-3. $00 sqlplus/nolog
  
  SQL * more: release 10.2.0.2.0 - Production on Thu Apr 23 20:27:15 2009
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  SQL > conn virtue sysdba
  
  Connected.
  
  SQL > select sysdate to double;
  
  SYSDATE
  ---------
  23 APRIL 09
  
  SQL > select systimestamp from double;
  
  SYSTIMESTAMP
  ---------------------------------------------------------------------------
  APRIL 23 09 08.27.53.250947 H + 05:30

  It's a matter of enforcement, not a question of Oracle.

  Oracle doesn't care what time it is, or when the weather changes. Your applications, however, can occupy. If you use SYSDATE to fill a line and depend on the date later to be unique or to indicate that the actual command lines have been inserted, changing the date on the server, in particular, he back off, could cause problems for your application. Your application has problems running when daylight saving time to save changes?

  Justin

• Charge time for Satellite click Mini L9W - B

  I have another question:

  I noticed that in the first 5 months, the charge time for my click satellite mini was about 6-8 hours for two batteries. Now, it takes much more time. Currently, he is responsible for 13.5 hours and the keyboard battery is not yet completely load (I'll post the exact end time later...).

  There may be a problem or is this normal? I mean that the charging time has almost doubled...

  Thanks in advance

  AFAIK battery reach optimal performance, after some time of use... This means that the battery must be charged and discharged several times to reach the best level... but it also means that the battery charge time would increase...

  So from my point of few, there is no reason to fear that something could be wrong with the battery... you know...

• You are looking for the block CD build based on the time for MPC simulation.vi

  Hello everyone! I'm trying to implement MPC in LabVIEW. I downloaded some code that shows the implementation. My question is in these codes that I see a named block as CD build based on the time for MPC simulation.vi. I tried to find a lot of this block, but I could not... Can someone help me with the problem (exactly under what section I get this block) or can someone tell me how can I give the profile of setpoint for the problem of simulation MPC?

  The associated screws to generate the profile found in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\addons\Control Design\_MPC\Reference profile

  or

  C:\Program NIUninstaller Instruments\LabVIEW 2011\\vi.lib\addons\Control Design\_MPC\Reference profile

  You can look at examples of:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

  C:\Program NIUninstaller Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

  to check the use of these screws

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Hello Pidcock,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you want to change on your computer sleep timer. I'll be happy to answer that question for you. Now you have not specified what operating system you are using, so I guess it's the same operating system provided with your computer (Windows 7). I will provide you the HP support document: Management of power (Windows 7 and Vista) Options, which will guide you in how to set the power of your laptop. Just in case you have upgraded to Windows 8 I am also including the HP Support document: Manage the power (Windows 8) Options. This document will guide you through the same steps in Windows 8.

  I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Have a great day!

• SQL to set overall time for all work

  6.2.1.x

  We had a maintenance COMPUTER each night window that starts at 22:30 for many years.  Looks like that will change to start at 23:00 every night instead. We have hundreds of "hard coded" ad-hoc jobs at 22:30 (not inherit) that needs to be changed to 23:00 start.  The jobs are not inherit time due to a current bug who inherited the time is not picked up when insertion in annex jobs who do not have a calendar.

  I need a SQL script that can change the world for the start time for me, so I can't spend an entire day by clicking on the graphical interface.

  Appreciate any help.

  Thank you!

  Hey Tyler,

  Just a little warning: as with the SQL query that modifies the data base of the Admiral in a form, code must be tested and validated by Cisco Support before applying the changes in your own environment. Otherwise, if you run any piece of code that will break the database of the Admiral, this will void the contract between your company and Cisco etc. Note that this piece of SQL code is intended to guide you in the right direction, so that you can view and change your environmental needs, and ALWAYS back up your database of Admiral.

  Jd UPDATE

  -Tide uses a default funny SQL server date depending on version, it's okay to take effect the

  ' SET jd.jobdtl_fromtm = ' MM/DD/YYYY 11:00:00 PM.
  OF jobdtl LIKE jd
  INNER JOIN jobmst AS jm
  ON jd.jobdtl_id = jm.jobdtl_id

  -to determine whether employment is ad-hoc when no calendar is from jobmst
  WHERE jm.evntmst_id IS NULL AND
  JM.jobmst_active = 'Y' AND
  JM.jobmst_dirty <> 'X '.

  - AND jm.jobmst_id = XX, where XX is only linked to a single task for test purposes

  ARO

  The Derrick

• restart windows multi server time

  restart windows multi server time

  Discussions were merged.

  Deleted duplicates.

  Multi Windows server reboot time in a powershell script?

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer