Similar Questions

• Change device name was detected

  Hello

  I have a machine to 2008R2 who is discovered with OMSA and iDRAC.  In the application logs I see ' change device name was detected based on MAC address xxxxxxx old name: xxxxxxx, new name: xxxxx "the old name is the host of the OMSA DNS entry and the new name is the DNS entry for the iDRAC.

  OME is getting confused?

  If it is not recommended to discover with OMSA and iDRAC for same host?

  Thank you

  Tim

  Hi Harris,

  The message that you see in the newspapers is to name DNS change in the database. If you notice the tree view of the devices, would not have changed the name of the device in the devices tree. Is this correct?

  For cases, when the server is inaccessible, there is no way that OME is unable to make a name for this resolution and if the DNS name of the device goes into the database and it takes the name DNS iDRAC. Newspapers are for all changes that occur in the database.

  You can certainly discover iDRAC and server set and correlation between server and RAC should arrive in the tree view of the devices with the name of the specified server.

• EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

  My iPod touch get now and then next alert message due to change on my iPhone.

  EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

  Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

  What is my apple ID used on other devices with the same name as my iPhone?

  I would be happy if anyone has an explanation of why I feel this strange behavior.

  When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

  You said "by reason of change on my iPhone"

  What has changed on the iPhone?

• Whenever I log on Facebook and other websites I am asked to name my device or need to enter my information instead of sites recognizing my computer.

  Whenever I log on Facebook and other websites I am asked to name my device or need to enter my information instead of sites recognizing my computer.  What is the cause?

  original title: "name of your device.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the exact error message?
  4. what browser do you use?

  You can try the steps below if you use internet explore.

  Step 1: Disable an add-on at a time and check if this problem is caused by one of the add-on.

  Reference:
  How to manage add-ons in Internet Explorer 9
  http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9
  Internet Explorer Add-ons: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Step 2: Reset the settings of internet explorer.

  Reference:
  Reset the settings of Internet Explorer 9
  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9
  Reset Internet Explorer 8 settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

• Is there anything I can change/device manager/cmd Vista for my job wireless in the slot 2 PCI?

  System:
  E Machine T5086
  Vista Home Premium 32 bit SP2
  Intel Pentium 4 3 GHz
  2gigs RAM
  MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
  Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN Card

  Background:
  I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.

  Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.

  Troubleshooting based on other threads:
  *. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.

  1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)

  2. uninstalled wireless again. Restarted. Reinstalled.

  3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.

  4 uninstalled. Starts in Mode safe. Reinstalled.

  5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)

  6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.

  7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.

  8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.

  9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.

  10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."

  About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.

  Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.

  Hello

  It's probably the shared IRQ that creates it.

  Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.

  Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16833166022&cm_re=usn_wireless-_-33-166-022-_-Product

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Everything affects the physical files hosted ASM name changes?

  our system administration team changing the name of the file where the DSO is hosted... How to rename ASM? a link or document any metalink exist to quick referance?
  
  Thank you
  Raman.

  is there any required changes in Oracle ASM after the device physics change of name/is the names of device anywhere in Oracle ASM

  N ° disks are labeled with a label of the DSO. ASM will look for this label and recognizes the drives even if the paths of the physical devices (e.g./dev/sdb--> / dev/sdz) has changed. However, you need to ensure that the new locations of the unit corresponds to your asm_diskstring setting.

  --
  Ronny Egner
  My blog: http://blog.ronnyegner-consulting.de

• Breaking SMB permissions after the NAS host name change.

  Broken SMB permissions after the NAS host name change

  ReadyNAS 104 firmware 6.5.1

  Who can help me?

  I couldn't reach the NAS with Windows Explorer. Problem solved now.

• Monthly automatic name change

  Hi guys, I worked on a VI that has done a number of things and one of them is that he writes to a file, a number of variables, my question is if anyone out there has tried an "automatic file name change"? For example, whenever changes in months the VI will automatically create a new file named after the month and writing of the variables in the boot file, in this way he used call even...

  Any ideas? Here's what I've done so now...

  Thank you!

  

  Hey Magb...

  I suggest you check out this example

  It teaches you how to change a file path programmatically according to the date that the data acquisition; It also uses a State of the machine do.

  This way you will have only one file per month even if your VI works with non-stop for 5 months straight...

  You would have to change to acquire your data and store it in the path you want, because it stores in 'My Documents'

  Good luck with your application

• Error Impossible creatures: the resoucre you're looking could have been removed, had its name changed, or is temporairly unavailable

  original title: Impossible creatures

  did you remove the link to install the trial version impossible creatures, otherwise why he always say the resoucre you are looking for has been deleted, its name changed or is temporairly unavailable

  Try this site to download. I tried it and it works.

  http://games.Softpedia.com/get/games-demo/impossible-creatures-demo.shtml

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• A7r / A7 file name change and bottom of shutter

  A7r / A7 file name change and bottom of shutter

  A simple feature to add to a new FW must have the ability to change the START of the file name.

  If you have two new A7r... both have simular filenames and will start conflicts.

  What you should be able to do... it's name... say A7r_00001 HDR and HDR-A7r2_00001

  WHERE in the EXIF is the actual NUMBER of trigger to shutter (unchanging)?

  It's like the odometer of camera

  Excellent Suggestion!

• Need to find the version number referring to the last name change for each emplid.

  emplID	Name age	Version
  ---	-----   ---	--------
  1	ABC	25	2
  1	ABC	26	5
  1	def	27	9
  1	def	28	15
  1	def	29	18
  2	JKL	15	5
  2	MNO	16	8
  2	MNO	17	11
  2	PQR	18	20

  Need to find the version number referring to the last name change for each emplid.

  As indicated by the version number change when there is change in age as well, but I need a query that gives the version number referring to the last name change for each emplid.

  with

  DATA_TABLE (EmplId, Name, Age, version) as

  (select 1, 'abc', 25, 2 double Union all

  Select 1, 'abc', 26, 5 Union double all the

  Select 1, 'def', 27, 9 double Union all

  Select 1, 'def', 28, 15 double Union all

  Select 1, 'def', 29, 18 double Union all

  Select 2, 'jkl', 15 5 Union double all the

  Select 2, 'mno', 16, 8 double Union all

  Select 2, 'mno', 17, 11 double Union all

  Select 2, 'pqr', 18, 20 double

  )

  Select emplid,

  Max (Name) name of Dungeon (dense_rank last order by version).

  Max (Age) age of Dungeon (dense_rank last order by version).

  version Max (version)

  from (select emplid, name, version,)

  -case where name! = lag(name,1,name) on (emplid version order partition)

  then "renamed".

  end change

  of data_table

  )

  where the change is not null

  Emplid group

  EMPLID	NAME	AGE	VERSION
  1	def	27	9
  2	PQR	18	20

  Concerning

  Etbin

• Workspace name change

  Hello world
  
  I would like to change the name of a workspace, but I don't know how this change will impact on the tools that are already in this workspace.
  
  Is this ok to change the name, if I have a bunch of tools in the workspace?
  
  The tools will work after the name change?
  
  I'm under apex 4.1 on an 11g database.
  
  Thank you.
  Alex.

  Hello

  I would like to change the name of a workspace, but I don't know how this change will impact on the tools that are already in this workspace.

  Is this ok to change the name, if I have a bunch of tools in the workspace?
  >
  By tools, you are referring to the Apex Applications or something else?
  >
  The tools will work after the name change?

  I'm under apex 4.1 on an 11g database. >

  APEX uses internally the Worskspace ID, not name. If the only code that is affected is your code that uses the workspace name!

  See you soon,.

• Is there a VM event for the VM host name change?

  Hello

  I have an application that is in talks with the VC to get the events from the virtual computer.

  I have a virtual machine on which I install VMWare tools to get the host name of the virtual machine. From now, the first time that the virtual machine gets up, my request to get the host name for this virtual machine. Now, if the host name of this virtual machine changes, is there any event that will be generated by VMWare or VC tools that my application can subscribe to in order to choose the host name change?

  Thank you

  There is no integrated case that will capture this.  The virtual machine has the dns name property that can be extracted from the db, or using one of the vi toolkits.  You can run gets against these data and validate it against the previous value, but no direct case is only triggered when the host inside the virtual machine name is changed.

  -KjB

  VMware vExpert

• Full name change event is not get fired

  Our users IOM are automatically provisioned to OID using OID box connector. Provisioning works as expected. Now I'm going to put in place the event "Attribute of change", so that any changes made to the IOM users get implemented in OID. All change events work correctly until now except 'change name '.
  
  The "Lookup.USR_PROCESS_TRIGGERS" were after the entry for the display name.
  Code key-> USR_DISPLAY_NAME
  Decode-> change of name
  
  My "User OID" process has a task "name complete change" configured with adapter adpOIDMODIFYUSER. The AttrName mapped to 'Full name' and AttrVale is mapped to the full name of UserDefinition.
  
  I changed the value of 'Full name' from one user to the IOM, it does NOT raise the expected «Full name of Chane» event Any idea what could have gone wrong?
  
  Thank you!
  -Kabi

  Change the name of the task of 'Name change' to something else say "FullName updated"

  Create a new task "Name change" and on the integration tab, add the Copyfield adapter.
  You get the full name of the definition of the user and map to the same variable in the treatment of the data

  M