Full name change event is not get fired

Similar Questions

• ValueChangeListner do not get fired when I entered the same value after you remove the first.

  Hello world

  Can anyone help on this.

  JDeveloper version 11.1.1.7

  I use '< af:inputText >' with valueCaangeListner.

  Here as soon as I entered a value, valueChangeListener get fired...

  Problem:

  When I remove the and I entered the same gain value in the text entry box, ValueChangeListner do not get fired.

  When I came again, a value different valueChangelistner get me fired.

  Kind regards

  Malenfant.

  What you say is logic and sense, you enter 500 then delete 00 then add 00 in inputText perspective there is no change in place, therefore, the converter does not occur because there is no changes occur.

  To do something like that you can do a work around using javascript. You can follow these steps:

  1. Select af:inputText and bind it to the backbean

  2 - Add clientListener and serverListener inside inputText as:

  3 - Add handelEnterButton as javascript method:

  function handelEnterButton(event)
  {
    var code=event.getKeyCode();
    if (code==13)
    {
       var source = event.getSource();
       AdfCustomEvent.queue(source,"serverListenerOperations", {}, false);
    }
  }
  

  4. in the method of serverListener back bean refresh as inputText component:

    public void serverListener(ClientEvent clientEvent)
    {
      RequestContext.getCurrentInstance().addPartialTarget(getMyInputTextComponent());
    }
  

  5. now, try to change something in the inputText and then press enter

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• The change event is not firing when it is linked to a text entry field in 15 FF

  $("#dealer-warranty-parts-percent").bind ('change', function() {}
  data.partsPercent = $(this) .val ();
  AMMS.dealerWarrantyModified = 1;
  });

  This code will not trigger in the last (15 FF) version of FF, but fires in the previous version. I feel now move to blur event.

  Too bad after further digging into the code, there seems to be a problem with lie the keyup event that was deeper into the code that seems to be the ultimate culprit.

• Stratus SharedObject.getRemote (); never give a SyncEvent? Even on the changes, we do not get a synchronization

  Here is the code I m using to try a getRemote sharedObject simple to share state between different clients of Stratus, but the SyncEvent never was fired, then how do we share state on customers Stratus? Thank you very much

  package
  {
  import flash.display.Sprite;
  import flash.events.NetStatusEvent;
  import flash.net.NetConnection;
  import flash.net.NetGroup;
  flash.net import. *;
  import flash.events. *;
  import flash.net.SharedObject;
  import flash.text. *;

  import flash.media.Camera;
  import flash.media.Video;
  import flash.events.MouseEvent;
  import flash.display.LoaderInfo;
  Import fl.controls.Button;

  /**
  * ...
  brand * @author
  */
  SerializableAttribute public class RemoteSharedObject extends Sprite
  {
  Singleton
  public static var _instance:RemoteSharedObject;
  Singleton
  public static void get () of the instance: {RemoteSharedObject}
  if(_instance == null) {}
  _instance = new RemoteSharedObject();
  }

  return _instance;
  }
  
  const String SERVER = "rtmfp://stratus.adobe.com/";
  const DEVKEY:String = clΘ ';
  
  Declaring variables
  public var nc:NetConnection;
  private var videoURL:String = SERVER + HTTPS://ACTIVATION.LAPTOP.ORG/DEVKEY/POST/;
  public var remoteSO:SharedObject;
  var localText:TextField, remoteText:TextField;
  public void RemoteSharedObject (): void
  {
  
  localText = new TextField();
  localText.x = 100; localText.y = 100;
  localText.type = TextFieldType.INPUT;
  localText.backgroundColor = 0xEBF9B7;
  localText.autoSize = TextFieldAutoSize.CENTER;
  localText.width = 100;
  localText.height = 30;
  localText.text = 'local ';
  addChild (localText);
  
  addEventListener (MouseEvent.CLICK, changeRemoteSO);
  
  remoteText = new TextField();
  remoteText.x = 100; remoteText.y = 200;
  remoteText.backgroundColor = 0xE4F7FA;
  remoteText.type = TextFieldType.DYNAMIC;
  remoteText.autoSize = TextFieldAutoSize.CENTER;
  remoteText.width = 100;
  remoteText.height = 30;
  remoteText.text = "remote";
  addChild (remoteText);
  Connect to the server application
  NC = new NetConnection();
  trace ("Application started");
  Event listener to capture the State of the network connection
  nc.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);
  NC. Connect (videoURL);
  
  }

  private void netStatusHandler(event:NetStatusEvent):void
  {
  Switch (event.info.code)
  {
  Connection to the server
  case "NetConnection.Connect.Success":
  trace ("connected to the server:" + videoURL);
  createARemoteSO();
  break;
  }
  }

  private function createARemoteSO (): void
  {
  Create or obtain the reference to the remote shared object
  remoteSO = SharedObject.getRemote ("remoteSO", nc.uri, true);
  remoteSO.connect (nc);

  Event listener to the changes to the remote shared object handlr
  remoteSO.addEventListener (SyncEvent.SYNC, remoteSOChanged);
  }

  This function is called whenever a change is made to the remote object that is shared by other clients / app server
  private void remoteSOChanged(se:SyncEvent):void
  {
  trace ("remote", remoteSO.data.propertyName);
  remoteText.text = remoteSO.data.propertyName;
  
  }

  update the content of the remote shared object for this customer
  private void changeRemoteSO(evt:Event):void
  {
  remoteSO.setProperty ("propertyName", localText.text);
  trace ("premises", localText.text);
  }
  }
  
  }

  Stratus is for only peer-to-peer connections:

  http://labs.Adobe.com/technologies/Stratus/

  What is the difference between Stratus and a Flash Media Server?

  When you use Stratus, all data is encrypted and sent directly client to client without touching a server. In comparison, applications by using Flash Media Server (or RTMP), data always passes through the server consuming both upload and download bandwidth of the server and the clients.  Stratus is a preview service which has its limits not including any programming of custom server and no remote shared object supports.

• Delete the mailbox Exchange special letters is not get fired

  Hello
  I use the custom to Exchange 2010 supply adapter. All custom tasks and tasks such as user to disable by default, allow the user properly. But delete the workflow user does not work. All enable, disable, and delete jobs are mapped to the system card-tccomplete task. When I delete the user account in the IDM, then AD gets deleted (revoked) successfully but Exchange still shows as active (provisioning). The status of all jobs, in the terms of trade, shows Canceled. I don't see my task deleting user in the context of resource Exchange but all other tasks changes status to cancelled.
  A few days before it was working fine, but today is not.
  
  Am I missing any configuration of the task? Please help me in this regard.
  
  
  
  
  Thank you.
  
  Published by: user11957197 on November 5, 2012 04:34

  The task to remove is triggered off the coast of the tab Undo/recovery jobs. This is usually set to the task of creating a user. Check to see that your task to remove the mailbox exists here. If it does, then open your diagnostic log and check the logs at the time where you performed the deletion and you should be able to see the question.

  -Kevin

• How to get the ActiveX component value change event?

  Hi all

  LV 8.6.1

  I try to get the ActiveX component value change event. I covered forum and through examples, but I can't get an idea of how "Recalling vi. For example, in the example 'ActiveX event Callback for IE.vi' it is used "recall vi". I've added an example where the change event of value with the mouse to the bottom of the event are scheduled to the structure of the event. Mouse down event OK work but change the value no. Can anyone describe what I need to add to my example vi who value the change event works fine?

  BR, Jim

  Here is the solution! "Value changed event" is not performed in the structure of the event, but in "Reminder VI".

• UserChanged event does not run

  Why the event UserChanged without executing when the user is changed with the IEngine.CurrentUser property in an operator interface?  I noticed that it will run when the connect/disconnect methods occur, but not when it is modified directly.

  Also, is it possible to force this event programmatically, so runs the code in the callback associated with this event (such as a work-around?).

  Thank you

  Paul

  TS 4.0.1

  LV 8.5.1

  Paul,

  for the event to not be fired because IEngine.CurrentUser is a property of the engine and the event is controlled by the Application Manager. Therefore, changing the value of the property does not create the event on its own.

  If you work in a user interface, it is recommended to use the Manager commands; the application Manager provides a method of "Login":

  Connects the user by running the front-end reminder LoginLogout. This method does not wait for the callback to run. Use the ApplicationMgr.UserChanged event to determine whether the connection was successful.

  The downside is that the front-end LoginLogout creates the default value of connection dialogby. If you do not want to have this dialogue, you should consider to replace with your own front end. But please do not change the default reminder, but substitute using the directory of users!

  hope this helps,

  Norbert

• Change event of the checkbox in ActionScript?

  Hello
  
  I am creating a custom canvas. The canvas Gets an array of labels and populate a list of checkboxes with labels provided. In the Web, I have a checkbox "Select all" static. Activation of the box will select populated of all the boxes. Off selecting him 'select all' will be clear all the check boxes.
  
  Since I fill the box as follows:
  public function InitApp (): void
  {
  var NewCtrl:CheckBox;
  var str:String;
  
  for (var i: int = 0; i < LabelArr.length; i ++)
  {
  NewCtrl = new CheckBox();
  NewCtrl.label = LabelArr . toString();
  NewCtrl.selected = true;
  VBoxCtrl.addChild (DisplayObject (NewCtrl));
  }
  }
  
  Here's the question. If the user wants to deselect a checkbox, I want to deselect the button 'select all '. How can I do? Since the "change" event is not available in actionscript, I do not know to do. :(
  
  Help, please.

  Why do you say "change" event is not available in AS?

  You can use newCtrl.addEventListener ('change', handler) and the action required in the Manager.

• Structure of the event does not not at the exit of a Btn dialog box

  Hi all

  I have here a simple VI. I want to blow a One button in the user dialog box. I want VI to wait until the user clicks on the OK"" button. When we click on the OK button the VI should pop another dialogue a button and stops when you press the Ok button. The VI does not stop. The value change event is not captured by the structure of the event. Can't really understand why.

  What OK button you are wanting to trigger structure of the event?

  1. as you have connected it the case of the event is related to the OK INDICATOR on the front panel.  You don't have an OK button on the front panel. The OK button in the dialog box is not easily accessible to the structure of the event.

  2. programmatically change an indicator does not raise an event to change the value.

  3. you can use a Value property node (signaling) to trigger the occurrence.

  4. There is almost always a better way to do what you want to use an indicator and a value (follow the signs).

  Lynn

• How to change password email, cannot get the email account

  GI rlfreind change password, can not get into my account. need to change the account password for this * address email is removed from the privacy * can receive information on my * address email is removed from the privacy * box

  * original title - how to get my mail password is changed by angry girlfreind *.

  Hello

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• How can I get the toolbar to show just the icons, not the full name of the site

  in the toolbar, I want just the icons of my favorites to show, not the full name, so I can add more toolbar...

  Hello
  It seems that this problem should have a simple solution. All what you need to do is...

  1. Right-click a bookmark
  2. Click change
  3. Change the name of the site "" (simply press the space bar)
  4. Repeat steps.

  This will display the name as a SPACEBAR, eliminating the name entirely.

  Please contact the support!

• Get the Guest OS family and full name of PowerCLI VM Tools not installed OS?

  OK, been looking for this one, but need help...  If a virtual computer is turned off, or do not have installed VMware tools you can not get the OS or OS full name family?  Who can simply not be right... it's in the VMX file, in the UI Client VI, PowerCLI must so be able to get some how, right?  Someone has tackled this one!  Right?

  Partly right.

  The operating system that you see in the VIC or the VMX is what the creator of the host defined during the creation.

  It corresponds with the parameter - ID on the New - VM cmdlet.

  For more information on this ID, see errors during the GuestIDs of New - VM specification .

  The problem is that the creator of the prompt can define what he wants here, it does not match with the actual OS installed on the client!

  You can get this entry like this

  (Get-VM  | Get-View).summary.config.guestFullName
  

• How to change name if you do not have a name?

  So, I don't have a name, and all the guides say click on the name...

  Can I change another way?

  I Inline a photo but apparently dropbox is prohibited...

  When you create a Microsoft account using this e-mail address as [email protected], you automatically get assigned a Skype name like on-line: unnom. You cannot use Skype as your login ID name and you cannot change it. The only one you can change is your full name, which is your first and last name.

  http://community.Skype.com/T5/security-privacy-trust-and/new-to-Skype-and-having-trouble-signing-in/...

• value chain control event does not trigger change

  Hello

  I am trying to scan a barcode with a barcode usb HID scanner. I use a structure of the event to detect the change in the value of a control of the chain. When I scan the barcode, the chain control updates on the front panel, but the event does not fire until I left on my mouse on the front panel. can someone help? See attached vi

  Your barcodes are probably fixed length. When you get an event, check the length. If it corresponds to the length of the barcode, then process the data, otherwise wait for more characters.  This can be treated very quickly in the case of the event.

  Lynn