Name & location of the e-mail for the backup files

Similar Questions

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• How to change the location of the log file in File Appender for log4j when used with the logic of the Web?

  I use log4j with weblogic

  I want to change the location of the log file in File Appender.

  I have tried providing another place but it will create the file in the same place in mydomain

  even if it has been changed in the log4j.xml.

  No idea why it's happening or what I can do to change the location of my log File? Thank you!

  Everything is perfect just replace '-' with "/" in the given file path.

• Get the former locations of the data files and Redo logs

  Version: 11.2
  Platform: Solaris 10
  
  When we manage hundreds of DBs, we do not know the locations of all DB files these allows DBs. say a DB goes down and you have all the required RMAN backups.
  
  When you restore the DB in a new location in the path of the new server, you must run the commands for the data files and ORLs below. But how do we know
  
  The former location of the data files.
  
  B. the old location of redo online stores that I can run
  
  run

  alter database rename file 'oldPath_of_OnlineRedoLogs' to 'newPath_of_OnlineRedoLogs' ;  --- Without this command , the restored control file will still reflect the old control file location

  run {
  set newname for datafile 1 to '/u04/oradata/lmnprod/lmnprod_system01.dbf' ;
  set newname for datafile 2 to '/u04/oradata/lmnprod/lmnprod_sysaux01.dbf' ;
  set newname for datafile 3 to '/u04/oradata/lmnprod/lmnprod_undotbs101.dbf' ;
  set newname for datafile 4 to '/u04/oradata/lmnprod/lmnprod_audit_ts01.dbf' ;
  set newname for datafile 5 to '/u04/oradata/lmnprod/lmnprod_quest_ts01.dbf' ;
  set newname for datafile 6 to '/u04/oradata/lmnprod/lmnprod_yelxr_ts01.dbf' ;
  .
  .
  .
  .
  .
  }

  Hello

  With the help of Oracle 11.2, you can use feature 'set newname for database' using OMF.

  SET NEWNAME FOR DATABASE TO '/oradata/%U';
  RESTORE DATABASE;
  SWITCH DATAFILE ALL;
  SWITCH TEMPFILE ALL;
  RECOVER DATABASE;
  

  After the restore and recover databases (i.e. before resetlog open) you can do to rename redolog. Just a query column member from v$ logfile and deliver ' alter database rename file 'oldPath_of_OnlineRedoLogs' to 'newPath_of_OnlineRedoLogs ';

  When we use the DSO is much easier to use OMF because Oracle automatically creates the directory structure.
  But when we use the file system that the OMF does not serve due DBA dislikes system generated on file system names.

  If you don't like OMF file system, you can use the script on thread below to help restore you using readable for datafile names, tempfile, and redo.

  {message: id = 9866752}

  Kind regards
  Levi Pereira

• Location of the backup folder View Manager - greyed out

  VMWare View - 5.0.1

  Try to change the location of the backup folder (View/view/servers/Edit Connection Configuration servers.  When I click on the tab back up, the location of the folder is grayed.  It is currently backup fine in C:\ProgramData\VMWare\VDM\backups, so there is no problem of backup.  I can't just change the path to what it's backup.  Do I have to stop a service to change the path?

  You cannot change this location by the Administrator display. Here it is read-only.

  You can change the location directly through LDAP, but by changing the attribute EAP-LDAPBUFolder for each connection to the server. See http://kb.vmware.com/kb/1010285

  Mark

• What are the location of the suspicious files if the system is infected by infection sality?

  Hello
  u can tell me that the location of the malicious files in the system is infected with sality delete manually

  This can help

  :en-GB:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7GGLT_en&redir_esc=&EI=mq0hTsuGOoKohAfY7-2pAw http://www.Google.co.UK/search?q=Sality+infection%3F&RLS=com.Microsoft

• When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". Got rid of the virus, but cannot get rid of "start".

  When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". I ran 6 different viruses, malware, rootkit, scans etc. everything looks clean, but 'start' is still there when I right click the executable files. How can I get rid of him? I tried the System File Checker tool, it didn't work. When I click on "Start" it is not now open applications.

  Do not know if it is any help.

  http://www.online-tech-tips.com/computer-tips/Windows-right-click-context-menu/

  Be careful when you change the registry so... Make sure that you have backups.

• my desktop icons are changed and does not directly but opening in the location of the original file.

  original title: my desktop icons are changed and does not directly but opening in the location of the original file. So how do you restore originally propertities of the desktop icons

  Mr President, due to changes attributed to the icons of the office by my children, my desktop icons are changed and does not directly open, but they are open in the location of the original file. So how do you restore originally propertities of the desktop icons

  Thank you.

  Hello

  I suggest you follow the steps mentioned below.

  Method 1: Run the Fix - it.

  Follow the link below and run the Fix - it and check if it helps.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Run a sfc scan.

  Follow the link below and check the resulting errors.

  http://support.Microsoft.com/kb/929833

  Method 3: Perform a system restore.

  Follow the link below and perform a restore of the system to a point before, when the system was working fine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  It will be useful.

• I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!

  I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!

  Clear your temp and tmp directories.

  Close your cc desktop app and restart as admin (win) or root (mac) user.  Next, install your cc applications.

• specify the location of the js files in the Help folder

  When I generate my WebHelp file everything added the following:
  < script type = "text/javascript" language = "javascript" src = "whver.js" > < / script >
  < script type = "text/javascript" language = "javascript1.2" src = "whproxy.js" > < / script >
  < script type = "text/javascript" language = "javascript1.2" src = "whutils.js" > < / script >
  < script type = "text/javascript" language = "javascript1.2" src = "whlang.js" > < / script >
  < script type = "text/javascript" language = "javascript1.2" src = "whtopic.js" > < / script >
  
  Developers require that I Specifies the location of the js files in the help folder so each line would include src = "help/WebHelp_en_CA/as follows:"
  "< script type =" text/javascript"language ="javascript"src="help/WebHelp_en_CA/whver.js "> < / script >
  
  I know that I can make the change manually (need to do after each generation) but is there a setting where I says this is part of the build process.

  HR puts in the relative path. That's the way it works so something else there is a risk of breakdown of aid. It works as they wish?

  There is nothing built in HR to do. Why would there be?

  I can't see any point in this completely unnecessary change.

• Restore the backup files. Windows Vista Expert needed!

  Help!  Recently, a virus wiped out my operating system (Windows Vista).  C drive my PC had literally nothing about it.  Then I got a new VISTA OS installed by a repair shop.  I tried to restore my previous configuration from the backup I had on an external drive, using the Vista Backup & Restore utility.  This "worked" except that he restored the backup files in a separate location on the C drive.  Using the windows Explorer I see all those files that have been restored in a folder named "Thom".

  However the new Vista installation has the user name "Thomas" where a configuration complete, (Documents, Favorites, desktop, etc.), was created.  When I connect, it's the config I see (new office, new files and folders for this new user, 'Thomas'.  I want to use the configuration, (files, folders, office computer), under the former name "Thom", not this new one, "Thomas."

  I'm afraid to just delete the files under Thomas I'm afraid I'm going to destroy my access to Windows in general.  Currently, I show only a user account in the control panel.  I don't have the 'Thom' user in the folder of the user within the new configuration.  How to delete files and folders under Thomas and use files and folders in the folder named Thom that is located on drive C?

  All restoring the backup files are there, they show just a folder on drive C, titled "Thom".  When I connect to my pc it takes me to your desktop created by the new facility.  I need ALL the files in the backup (office, e-mail, files & folders), not the Setup program created by the installation of the new Vista.  I want to be able to connect to windows and have it use the backup files, which are located in this folder named "Thom" which show on the C drive.

  Can I simply combine or merge or copy the files in the folder 'Thom', I want to use in the files of the same name, (contacts, documents, Favorites, desktop), which are under the name of "Thomas"?  Can I remove folders under the user 'Thomas' and all it's files and records and hope that windows then takes me in the files that I want to use?

  I use my laptop, (HP Pavilion, 64-bit), for business and I'm dead in the water until I can access my old configuration.  I am on day 5 of this disaster and I am desperate, please help!

  Hello Reggie999,

  Thanks for the return of the response.  You can move the files/folders in the 'Thom' folder in your new user account 'Thomas '.   Or another option would be to create a new user account and call it what you want, then move the folder in this user account.

  If you create a new user account and move your files/folders to this account, it would be nice to delete the user account 'Thomas '.  Just make sure that you have all of the files in the profile that you have recently created/added.

  New profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• HOWTO set default directory of FRA with the backup file format?

  First of all, Happy home at all!
  
  
  My database uses default FRA - Flash recovery area, also:
  
  db_recovery_file_dest = C:\oracle\product\10.2.0/flash_recovery_area
  
  SQL & gt; list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive USE_DB_RECOVERY_FILE_DEST
  More old sequence of journal online 14
  Log sequence archive 16
  Current log sequence 16
  
  1. now, when I say:
  RMAN & gt; basis of data backup;
  
  Oracle, create and place the file backup in the directory of the FRA, exm:
  C:\oracle\product\10.2.0\flash_recovery_area\ORCL\BACKUPSET\2009_01_10\O1_MF_NNNDF_TAG20090110T161353_4PKGSKYR_. BKP
  All right!
  
  
  2 but I don't like the name of OMF file generated, I say:
  RMAN & gt; backup of database format 'DD_%d_%s_%u.bkp' TAG = "MyTag01";
  
  
  RMAN put the backup file NOT in FRA directory (such as 1), but now in C:\oracle\product\10.2.0\db_1\database, exm:
  C:\oracle\product\10.2.0\db_1\database\DD_ORCL_42_1AK4FI9L. BKP
  
  
  Question: How can I tell RMAN place FRA default directory backup file - area recovery Flash, but using special own format, no OMF?
  
  Thank you

  If you read from here,
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmconfg.htm#i1009784
  >
  Creating RMAN in the Flash recovery area files

  This section describes RMAN commands or implicit actions (such as backup of control file) that can create files in the flash recovery area and how to control whether a specific command creates files there or in some other destination. Support in all cases, is that a flash recovery area has already been configured for your database. The commands are:

  BACKUP

  Do not specify a FORMAT of the BACKUP command option and do not configure a FORMAT option for backups to disk. In such a case, RMAN creates backup and copies image elements in the area of flash recovery, with names to the name format for Oracle managed files. >
  If you want to use FRA, you will have to live with OMF, because that's the way it works. If you want to give names of manual backup, it would be on a different location, but not on FRA.
  HTH
  Aman...

• "Failed to process the backup file" - bookmarks JSON file

  I deleted my appdata files without thinking and then allowed my trash. When I opened firefox again all my favorites have disappeared. I used piriform recuva to find my deleted files and recover the backup JSON files 10 bookmark. When I try to restore my bookmarks, I get the message "failed to process the backup file". "Files are 95 KB in size, but when I open them with Notepad that they are empty, however, when you use the Restore tool, it is said ' elements of 480", which I assume is the amount of bookmarks, I had, which means that firefox can see data. The same happens for all ten backups that I recovered.

  Any help would be appreciated.

  What is the name of this file?

  Firefox can only look at the file name for the number of items.

  • < number > _ < hash > .json bookmark-YYYY-MM-JJ_

  The files in the bookmarkbackups folder are currently in compressed format .jsonlz4 (i.e., they show data binary like a ZIP compressed archive) and cannot be easily unzipped for access the JSON text format.
  The files are compressed means that a single error in the file will make it impossible to unpack the file.

  Have you checked all the available JSON backup to see if everything works?

  A backup created manually JSON is always not compressed, so can be easily inspected or opened in a text editor (Notepad > "Pretty Print"), but with a compressed file, it is much more difficult.

  Recovery of a file via an undelete utility is no guarantee that the space occupied by the file has not been used by another file, and so is corrupt.

• Could not open the backup file Money99 after reinstalling Windows 8

  My Sony VAIO came with Windows 8, and I used Money99 on it without problem.  When I upgraded to Windows 8.1 and later Windows 10, I was able to restore the backup file I had saved on a USB key, and I continued using the program.  Today, I re-set my VAIO to factory settings because after 6 months with 10 Windows, I couldn't tolerate frequent them freezes and purple/blue screens of death.  I have re-installed Money99 through CD and it seems to work fine.  However, whenever I try to restore my backup file, it tells me it either cannot find the file or it is a read-only file.  I confirmed the file is located on the USB and it has not defined on read-only, hidden or archive.  He said: I have, the system and the administrator can all open it.  When I did a search on this subject, I couldn't find answers especially to Money99.  Others had the same problem with the more recent of the money, and some versions proposed to copy the backup file to the hard drive before you restore it.  I tried, but I get the same message.  I don't think that the USB is corrupted or damaged, especially after reading that others have had this same problem.  Does anyone have the solution? It would be much appreciated!

  Hello

  This is the best Forum of Money. Please post your query on the Microsoft Money forum for expert assistance.

  https://social.Microsoft.com/forums/en-us/home?Forum=money

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• When I try to restore my bookmarks I get the message "Failed to process the backup file."

  I lost my favorites and when I try to get back them, I can see the backup files in the recover window, but when I try to restore my bookmarks I get the message "Failed to process the backup file." Can help you? Thank you

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• "The backup file contains unrecognized data and cannot be used.

  Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.

  I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message.  No catalog cannot be created for many, but not all of my backup BKF files.

  I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.

  Thank you.

  You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP

  I have no information other than what is on the web page.