specify the location of the js files in the Help folder

Similar Questions

• Specify the default target for a preset custom of the SOUL

  This compressor is broken so I jump into SOUL with some urgency, try to rebuild my custom presets.

  I want to be able to specify the target folder by default for the products of a particular "Preset".

  Anyone know how?

  Thank you

  Eric D - CoralVision

  Eric Dickerson: I asked the same question on the forum of the SOUL 4 days ago, but it's just crickets in there.
    Jean-Philippe: Hello! Welcome to Adobe support.
    Jean-Philippe: Please allow me 1-2 minute (s) review the details of your account.
    Jean-Philippe: I read the description of your problem. You will allow me a few minutes.
    Jean-Philippe: I just checked. Unfortunately, still unable to set output folder for presets custom in the SOUL.
    Eric Dickerson: Wow, that's a time killer. By clicking on each output and redirection is destination from the source to the appropriate output destination. May be easy to fix.
    Eric Dickerson: I know that I could indicate a default destination for all files, and it works if I had only 1 type of output, but most pro shops do not work like that...
    Jean-Philippe: You must specify the output only once and then exports it to the last specified location.
    Eric Dickerson: I publish 6 distinct profiles of 4 different platforms, which really helps me. I'll have to give records show another chance, but I think that to fail. It would be a great time for the SOUL to become my go-to tool, if she was ready. I hope I have fixed compressor soon.
    Eric Dickerson: Thanks for your help today, Funny!
    Jean-Philippe: You can fill out this feature request: -.
    Jean-Philippe: https://www.Adobe.com/products/wishform.html
    Jean-Philippe: I apologize for the inconvenience caused.
    Eric Dickerson: I'll do it, no need to apologize (to you and the support team) and thank you again.
    Jean-Philippe: You are welcome!
    Jean-Philippe: Good day to you!

• Not able to specify the location of file

  Dear all
  
  I use PCM 13.1 and we are not able to specify the path to the file by using the PCM admin login page, when I open in the browser and that goes to content management and click on the name of the project, and then Add specifies the location of the folder, I can put the name of the location but when I try to insert in the location of the file that I can't type or the pop-up window does not come to specify the location of the path I checked IE and other browsers but same effect, I also PCM site added to trusted sites and must change is low security, disable all POP-UP blocker. but no results, someone has an idea
  I thank in advance

  I had the same problem, it is with Java JRE installed on the machine.
  I uninstalled Java and installed Version 6 Update 26 and it worked fine

• Can I specify the location of the file to my favorites?

  I just want to favorites/bookmarks in a different directory.

  Cannot move file (places.sqlite) out of the profile folder bookmarks. You'd have to move the entire profile folder.

• What is the right way to specify the location of the shared library in an a .lvlib function call library function node?

  I'll have a bit of a problem with how to specify the location of library shared in a call library function node it is a VI that is part of a library of LV. Here's a little background which may help.

  I do a lot of measures using spectrometers photo from several manufacturers.  Someone in my company developed a C DLL library, which provides a simple API for all the different spectrometers. To facilitate this DLL to use in LabVIEW, I wrote a .lvlib that wraps all the functions.  When I want to use the API, I simply include the .lvlib file in my project that allows me to drag and drop the wrapper s VI on my block diagram. When I created the .lvlib of VI, I specified the path in the call library node. /. * so it will always look in the local application to the DLL directory when I run.

  The problem is, when I load demand, LabVIEW you asks for the location of the DLL even if it's just there in the local directory! I tried to put copies of the DLL in the directory with the .lvlib, but he still refuses to find the DLL loading.  What I am doing wrong?

  You should in this simple case enter the full path to the DLL by navigating to it. If the DLL is on the same volume/drive that the VI containing the call library node LabVIEW will be internally store the relative path from the VI to the DLL (but still show the absolute path). If you move the DLL and screw together (so the relative location of the DLL to the VI remains the same) LabVIEW will always find the DLL.

  I don't think that the lvlib would add nothing to that.

• How to read a file .xls to a situation identical to the sequence of the file without specifying the path?

  Hello

  I am trying to open a file .xls existing from the same location as the test sequence file. Can you TestStand search in the location of the sequence input file test file and then select the if present? Also, can we store the output file in the same place without specifying the path to the code?

  Example:

  Input.xls-> input file to the test sequence that must be read.

  Output.xls-> output file created by the test sequence.

  Test.SEQ-> the test sequence that reads Input.xls and creates Output.xls.

  If Test.seq and Input.xls are present instead of D:\Test\, the Test.seq code can be modified to pick up the Input.xls automatically without specifying the path? In addition, can Output.xls be created to D:\Test\ without specifying the path?

  Thank you

  Corinne

  Hi Isabelle,.

  Yes, this can be done. You can get the path to the current sequence file using RunState.SequenceFile.Path. Then find and remove the last '-' using the string functions to get just the path. You can then use this path to manage your files Input.xls and Output.xls.

  -Jack

• How to specify the location of CSS with BlackBerry S/w Version 4.5

  I use version 4.5 software.

  I'm developing some login pages in html and to specify the location of the CSS file. Documentation, I noticed that the HTML tag does not support the rel attributes or the type attribute that you can set to the style sheet and text/css.

  How can we embark/link CSS in the html file?

  Thanks in advance.

  The link tag should work. Maybe the docs are wrong. Best way is to just try and see what happens.

• How to specify 'archivelog' location (as /u02/ < SID > /archivelog/ < DATE >) in the DBCA Wizard?

  Hello

  Oracle 11 g 2 on the file system

  I have always used the default for the archivelogs location when you create a new database using "dbca. For example, if I create "orcl", dbca will do the following:

  /u01/app/oracle/fast_recovery_area/ORCL/archivelog/
  
  

  And less the ' archivelog; Directory, oracle automatically creates new folders for the current date and the archivelog files stored in this folder for this date. For example:

  /u01/app/oracle/fast_recovery_area/ORCL/archivelog/2014_03_07
  
  

  I was invited, for all the new databases, specify a different mount point for archivelog files (for example, ' / u02').

  Now when I specify "/ u02" in the "Archive Log Destinations" in the DBCA UI, oracle begins to store all archivelog files in this folder and does not create the subfolders like /u02/< SID > /archivelog/ < DATE >.

  Is there a way to tell DBCA?

  Best regards

  You can set the parameter db_recovery_file_dest creating the db using dbca

  destination of archvelog,

  You must set use_db_recovery_file_dest on format archivelog destination screen.it directive to use db_recovery_file_dest (fra)

  Concerning

• ODI installation error - specify the location of the jdk/jre

  Hi all
  
  I installed the version Hyperion 11.1.2.2 successfully on 3 servers.
  Now, we have a requirement we want to install ODI 11 g in one of the servers.
  In that, we have installed Essbase administration services, service provider, EPMA, CM, strategic finance.
  
  Now, when I try to start the installation of 11g ODI, it asks for the location of the jdk/jre.
  In command prompt, I specified the path as setup.exe - jreLoc "C:\Program Files (x 86) \Java\jre6", but no use.
  
  In some blogs, I mentioned that we had to define Java home for this. If so, please tell me how to configure java House?
  
  Kind regards
  Mady

  Yes Tina,
  Your correct.

  I install jdk1.6.0_38 and then given command
  E:/ODI11g/Disk1 > Setup.exe - jreLoc C:\Progra~1\java\jdk1.6.0_38

  Now his work. Thanks for the quick response. I didn't except that I get answer that soon.

  Thank you once again Tina.
  Thanks Phanikanth.
  Thanks Xunliao.Guo

  Thank you all

  Kind regards
  Mady

  Published by: mady on March 14, 2013 19:11

• "Premiere Pro stores the files preview in a folder, you can specify" but how?

  By specifying a file Preview

  On page 265 of the PDF, it says:

  Premiere Pro stores files preview in a folder, so that you can specify.

  QUESTION 1

  But how you specify the folder? I just made a clip of test and did not offer the ability to specify a folder. And there is no further mention of overview in the PDF files.

  Preview for coding files

  On the same page is:

  Note: Adobe Media Encoder does not automatically use Premiere Pro preview files for encoding. To make the preview Premiere Pro files, you must select the option use previews in Adobe Media Encoder for each encoding process.

  It is is not clear on the PDF document what is the quality of these preview files.

  QUESTION 2

  If I choose to use previews option during export, not degrading the quality of the export of coding in an already coded preview?

  QUESTION 3

  For the absolute best quality, should use found be disabled?

  Location of the Preview file is determined in the parameters of the overall project.

  Set this location before you make any preview files.

  Project > project settings > working discs...

  

  Some documents concerning the location of the Scratch disk is buried here:

  Specify "scratch disks" to improve the performance of the system

  QUESTION 2

  If I choose to use previews option during export, not degrading the quality of the export of coding in an already coded preview?

  In most (if not all) cases... Yes.

  Extracts are intended for real-time playback in the timeline panel.

  You should not use found for export.*

  QUESTION 3

  For the absolute best quality, should use found be disabled?

  Yes!

  * There are a few exceptions to this general rule about semi obscure.

• create a tablespace without specifying the path to the data file and the name

  Hello
  
  Is it possible to create a tablespace without specifying the name and the path of the data file.
  
  For example: just specify the name of the tablespace and the size of the data file, the data file must be created in a default location with the default name? Is this possible?

  user13364377 wrote:
  Hello

  Is it possible to create a tablespace without specifying the name and the path of the data file.

  For example: just specify the name of the tablespace and the size of the data file, the data file must be created in a default location with the default name? Is this possible?

  The use of the files managed by Oracle
  Internally, Oracle uses standard file system interfaces to create and delete files if necessary for the following data structures:

  * Tablespaces
  * Online redo logs
  * Control of files

  Through initialization parameters, you specify the directory of file system to use for a particular file type.
  EXAMPLE:
  The following parameters are included in the initialization parameter file:

  DB_CREATE_FILE_DEST = ' / u01/oradata/sample.
  DB_CREATE_ONLINE_LOG_DEST_1 = "/ u02/oradata/sample.
  DB_CREATE_ONLINE_LOG_DEST_2 = ' / u03/oradata/sample.

  The following statement is issued at the SQL prompt:

  SQL > CREATE a DATABASE sample.
  SQL > CREATE TABLESPACE tbs_2 DATAFILE SIZE 400 M;
  SQL > CREATE UNDO TABLESPACE undotbs_1;

  check the link for more information:
  http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/OMF.htm

• specify the cfinput type file folder start

  Anyone know if there is a way if you use < cfinput type = "file"... > to specify the folder of the file Explorer starts in?
  
  Even better (and I REALLY want to do), is there a way to simply specify the file used by CFFILE name by concatenating the path + filename + extension doc, IE:
  
  < cfset form.photo = "source_path" & form.file_name_entered_by_user & ".jpg" >
  
  and then:
  
  < cffile action = "upload".
  fileField = "form.photo"...
  
  It would be much easier things mke for users.
  

  I'm sure that no, on both accounts. Mainly for security reasons.

  FILE fields require the user to interact with their computer and a decision consious about their choice. The startup location depends on where their last record or files during load or download of operations through the BONE... the OS commands this feature, not your web page. If people could program pages well start somewhere they could try and entice users to provide files which hinder the security of their computer. In addition, how do you believe you know where they recorded the file they are downloading?

  DOWNLOAD CFFILE requires a user multi-part form to submit for download, and the field sent to the command must be a file field. It cannot be done with the right programming. Again, it is a question of security, otherwise anyone could program a web page to steal files on a computer without the knowledge of the user, and it would be a huge legal and security problem.

• By specifying the file name for FTP out OSB transport

  I want OSB based service that will send via FTP a file with a specific name to a remote ftp location.
  It seems that OSB cannot do this because the FTP transport on a business service only allows you to specify the prefix and the suffix, and then generates a file name long great for midlle parties.
  
  Anyone know how to replace it and specify the name you want to call remote file name?

  mdsrobbins wrote:
  Your answer was useful, but being new OSB I'm not yet quite there because I want to spend a "variable" in the name of the file. Now I want a CSV file, I've specified a service proxy in a format MFL behind a jms messaging ftp queue. Business service underlying it is the ftp using the MFL format service. This works all I in the message flow to the proxy I can't have access to a user defined property that contains the name of the file that I could then pull and stuff it into the header 'Filename' as suggested above.

  DOE, anyone got any ideas how I can get access to a property of a JMS message file name?

  What I understand
  JMSQ - JMS PRoxy (MFL) - Pipeline---> BS (MFL/FTP) - FTP server

  If you want to set the file name contained custom JMS message headers? When creating your Proxy JMS you must follow these steps
  (1) for the creation of Proxy JMS in the transportation Configuration page select get all the headers = Yes
  (2) if the name of the file is set as defined by the JMS message property user then use $Header in your pipeline/message flow. This variable can contain your user-defined properties. If the user sets the property is part of the JMS message and then use $body.

  Thank you
  Maury

• How to locate and remove the attachment file to the Inbox folder?

  Hello

  My name is Piotr Tyborowski and I am the Doctor Web's Technical Support Engineer.
  I had such application suport - one of our customers has problem with viruses in Thunderbird Inbox folder - our antivirus scanner has found two Trojan horses in a file located in the Inbox folder and moved all of the Inbox folder to quarantine. We know that these files can be found here:

  > > C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part is ZIP archive
  C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part\KeyDLL.dll - Trojan.KeyLogger.6153-infected
  C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part\KeyDLL.dll - infected
  > > > C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part\svhosts.exe - compressed by UPX
  C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part\svhosts.exe - Trojan.Click.27588-infected
  C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part\svhosts.exe - infected
  C:\Users\Renatrix\AppData\Roaming\Thunderbird\Profiles\4dhjzo2v.default\Mail\Local Folders\Inbox.sbd\Konto WP\12145.part - archive infected

  I'm not very familiar with Thunderbird, so my question is - is is possible to get this file 12145.part and remove it as well, even with the message that cointains inside?

  Thank you in advance and Best Regards,.

  Piotr Tyborowski
  Doctor Web

  Piotr,

  If it's convenient, the absolutely safest approach is to delete the profile folder 4dhjzo2v.default while integer that TB is arrested.

  If the person is to use IMAP or POP with an option to leave emails on the server, there should not be a loss of emails (except in local folders).

  If there are important e-mails in local folders, and they are not infected, they could be exported to support storage and then imported into the new profile. There is an add-on to tuberculosis, which allows the import and export of emails in different formats.

  You will find instructions on how to download and install it in http://barryduggan.info/exportMail.php

• What is the q2tw177e.default file located in the profile folder

  The application data folder, windows xp, has a folder called q2tw177e.default, located in the profile folder. I know nothing with this label when searching google. Makes me suspicious of this folder. Nobody knows anything about. Thank you.

  There is nothing to fear from this folder.

  This is the real Firefox profile folder that stores your personal data.

  There are two of them:

  • C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.
  • C:\Documents and Settings\ < user > Data\Mozilla\Firefox\Profiles\ < profile > \Local Settings\Application.

  The latter is used for the cache of navigation and a few other files.
  
  See also the about: cache for the location of the cache page.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox