Name of forms and the associated management rules

Similar Questions

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• Hi everyone, Q: no matter what I do I install Muse in English, and the cloud Manager downloaded in Dutch, other programs are installed in English but Muse, reasonable please help.

  Hi everyone, Q: no matter what I do I install Muse in English, and the cloud Manager downloaded in Dutch, other programs are installed in English but Muse, reasonable please help.

  You can change the interface language user in Muse by throwing Muse and no .muse file opened, go to preferences and select the new language. Then quit and restart Muse for the language change to take full effect.

• How can I change the name of 'folio' and the ' name of the publication?

  Hello

  We have published a multi-folio application a unique folio in it.

  We would like to change the name of 'folio' and "the name of the publication" and we tried to do by using the dashboard. However, when clicking on "update" we box unchecked the "update content", because there is no change to the content of the folio. The problem is that this did not change anything in the application: the 'folio name' and "the name of the publication" remain the same...

  Is it possible to do without having to republish this folio?

  Thank you!

  Olivier.

  Metadata are considered as part of the content. Click Update again and leave the box "update content" checked.

  Neil

• can I take a form and put a pic within the form and the picture becomes the form?

  can I take a form and put a pic within the form and the picture becomes the form?

  Yes mel, you can do it. This video tutorial will allow you to do exactly that:

• Administration server and the servers managed (WebLogic Server).

  Hello

  What are Server Administration and managed servers , I saw these words as I read the installation guide for WebLogic server,

  but I don't know what they are?

  
  

  I saw them while I was reading on the Node manager that allows me to start the above mentioned.

  
  

  -J' installs the WebLogic to develop applications with oracle reports and forms services.

  
  

  1 - do I need a node Manager, Administration Server or managed servers?

  
  

  2. is the Manager nodes, Server Administration or servers managed as EnterPrise data control manager ?

  
  

  Thank you very much

  Answers to most of your questions WLS lie in WLS documentation:

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13752/TOC.htm

  However, a simple answer to your questions could be summed up as follows.

  If you are familiar with older versions of application server version 10, which include OC4J as its Java container, as a managed WLS server is basically the same thing.  In the context of WLS, a managed server is responsible for hosting java applications on the server side.  For example, Oracle Forms Servlet.  The WLS management server is actually a java application deployed on a managed server.  So, really, the "Admin" server is a kind of "Managed Server".  In a typical installation of forms/States, you will find that at least three 3 managed servers are created automatically for you:

  • Server Admin
  • WLS_FORMS
  • WLS_REPORTS

  Node Manager is a separate process that is used to allow the two directors of the WLS environment such as command line allowing the administrator of the server to communicate with other servers managed, local or remote.

  http://docs.Oracle.com/CD/E25178_01/Web.1111/e13740/overview.htm

  Then, for simply "run" apply (forms, for example), all you need is the managed server that hosts the forms Servlet.  However, if you want to change the configuration via a web interface, you must also run the administration server (and Node Manager).

  All these components are much more complex than what I've described here.  I would recommend to consider the documentation if you are interested in learning about them.  That said, the best way to really learn about them likely will be to install the product and start using it.

• New form and the corresponding code... !!! ???

  I created as an expense in forms6i... with the following fields.
  No, site name, site id, stc MC, district, region
  
  in this form, I have variouss the boxes that are around 15 i.eSDH - MX, DW - DM, SYNC
  
  and I got four buttons in this form as the first record, next record, previous record, last record...
  
  So, when I click on the first disc I want the first record to display and even to the other 3 buttons also...
  
  can any1 help me how shud that I proceed with this... I mean what u shud writing code for the 4 buttons to work...!

  Hello

  If you set block properties and item correctly, then there is no need to write code to insert, update, or delete.

  Make sure all the properties of the block (query Source data, query data Source name, Type Insert domestic, admitted, update delete allowed) and the properties of the element (element of database, the column name, domestic application, insert, Update Allowed) are set correctly.

  Kind regards

  Manu.

• Security for the family and the Task Manager

  I installed on all my computers, parental control, for all users, and it is configured to block all adult sites.  It works perfectly, but there is a fault.  A person can go into the Task Manager and end the process and access the internet without the security of the family running.  Is there a way to stop the possibility of terminating the process in the Task Manager?
  Help, please?

  Hi Lisa,

  We have simulated the issue on our end. Standard accounts can use the Task Manager to end the control client parental (fsui.exe), but if he or she tries to put end to the the service process control parental (fsssvc.exe), it will be refused. This would avoid the child's account to get around the parental control service.
  If you want to disable the tasks for the standard account manager, you can post on the forum of Windows. Please note that the Task Manager is useful for standard accounts such as terminate tasks for programs no longer responds.
  Thank you!

• Where to start to make a form and the landing page?

  I want to know where is the tool that offers a platform to start the coding and the shape and the landing page?

  You need to buy the Eloqua app before you start anything construction such as forms, Landing Pages, Emails etc.

  Visit http://www.eloqua.com/products/ for more details...

• Tabular form and the value of the element

  Hello people:

  I certainly hope that your holidays are festive.

  I have a question for you.

  I have a tabular form which is filled, based on a list of selection (with the type of delivery).  I placed a form on the same page (based on a table), and I would for a question to be filled as well following the list of selection even completing the tabular form.  What is the best way to go about this?  Calculation?  I'm not sure how to do this...

  Thanks for your help!

  Aqua

  AquaNX4 wrote:

  I have a tabular form which is filled, based on a list of selection (with the type of delivery).  I placed a form on the same page (based on a table), and I would for a question to be filled as well following the list of selection even completing the tabular form.  What is the best way to go about this?  Calculation?  I'm not sure how to do this...

  If the selection list submits the page then you can set the value of the element using a calculation after the presents. Make sure that it will not be reset by any statement of process or branch of State later clear session.

• Shop for fonts and the extensions Manager WHY is it so difficult?

  I am trying to install the add-on from the shop to the police. I can not yet do a smart search in the 'Adobe modules'... search can't find the FontShop module even if I type the term a few obvious ways.   YOUR RESEARCH NEEDS SPELL CHECK AND FIND * CLOSING MATCHES. There are SO MANY problems of usability in this forum and in the modules Adobe Adobe it's ridiculous. Basic stuff - usability 101.

  But I can directly download the add-on from FonstShop... But it will not install in my Photoshop CC 2015. The problem is 'Adobe Extensions Manager' will not appear Photoshop CC 2015 even if I installed it (via could Creative).

  How do you get the extensions Manager recognize Photoshop CC 2015?

  The short answer, as Stephanie, is that you don't have. It is obsolete. Check out these resources: Adobe Exchange, specifically this one: Adobe Exchange

• Dell C6100 HyperV Core reference and the Raid management

  I searched on the internet these days, trying to find and to shed light on certain issues, that we realized that we're not totally sure how to solve after the application of a C6100 Dell with HyperV on its blades.

  We have all the blades running with 4 drives, including two in a raid 1 configuration. We run HyperV based on all of its blades.

  What happens if one of those drives fails? 6100 raid configuration utility is in the BIOS, so it is obviously not an option. Since we use Core and have no GUI, other Dell RAID utilities are not going to work.

  How can you check the RAID health, other than just an orange flashing on a failed drive?

  Clrv salvation,

  The C6100 and the other cloud products are based on the IPMI 2.0 management standard and can have alerts sent using SNMP for drive failure or other errors. http://en.community.Dell.com/TechCenter/systems-management/w/wiki/1989.OpenManage-Essentials

• Details of the book and the associated account. URGENT

  Ahsan/Navin,
  
  The issue revolves primarily around dimension table and incremental load. If we get out SCD1/2 off stage for now, could it please answer Yes or no for the sub questions? Please, it's kind of emergency because the customer is really concerned about these aspects of the transfer of data in incremental loads. As always, appreciate your quick response. Suppose that this first full charge has been made.
  
  1. If we change a key field (effective date) of an account that is not a new transaction associated with it in the accounting - change will come after an extra charge?
  2. If we change a no key field (title) to a date of prior application for an account that is not a new transaction associated with it in the accounting - change will come after an extra charge?
  3. If we change a no key field (title) at an earlier date of an account that has a new transaction associated with it in the accounts - it will reflect after an extra charge?
  4. in the course of a full/incremental load process, 1st loaded dimension right tables? Otherwise and made are loaded first, they wont mistake seeing that no details of associated dimension does exist?
  5. we have a few custom tables that is not any sort of a column of datetimestamp. Is bringing all over every time load happens, the only option? What is the best method to deal with such situations?
  
  Thank you
  Dan

  For your first 3 questions, it depends on the DATE of LAST UPDATE in the main tables in the source system. This differs a little through the various systems of source, but in general, if the source system table has a 'Update Date' which is used as a filter for the load increment SQL qualifier, then he will grab this record... and if you have Type 1 SCD, the whole line is updated for all areas. If you have a Type 2 SCD enabled, then ONLY the dimension columns that are part of the TYPE2_DIFF will be result in end dating the existing record and the Iinserting a NEW record. So the SCD Type 2, to see if additional columns should be added to capture the story. OOTB only the records in the TYPE2DIFF are compared for the capture of history.

  For your other questions:

  4. in the course of a full/incremental load process, 1st loaded dimension right tables? Otherwise and made are loaded first, they wont mistake seeing that no details of associated dimension does exist?
  A: Yes, Dims are usually responsible first for each star schema. Note, however, that there are sometimes persistent implementation stage and other auxiliary tables for facts which can be loaded but that if STUMP in general Yes, before the FACTS.

  5. we have a few custom tables that is not any sort of a column of datetimestamp. Is bringing all over every time load happens, the only option? What is the best method to deal with such situations?
  A: If you NEED capture history on these custom tables, you can do this w custom changes made on the side of the DW via Informatica. If you do not need history then I don't see the problem with the reloaded each time... you have a large amount of data? If not, then why is it a problem?

• Muse, forms and the FTP download

  Does anyone know a work-around for the forms of the Muse when using outside hosting? I created a site, including forms, forgetting that they only work with BC. My client has specifically requested forms, and now I have no idea what to do. Thank you.

  Since the launch of Muse 5, widget form now works for most web hosts - http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html#June 17, 2013. If the forms of the Muse do not work with your hosting provider, see this FAQ - http://forums.adobe.com/docs/DOC-3581.

  Thank you

  Vinayak