Narrow limit of chart-Smith

Similar Questions

• How can I increase the limit of chart bar flash 15 element

  Hi, I created a bar chart flash (with another series displayed in the chart) However, even if the number of items returned by SQL is greater than 15, it shows only the top 15. Is it possible that I can wear it - I tried to change the size of the chart and addition of scroll bars, but who just adjusts - without increasing the number of items.
  
  Thanks much for any help.
  
  Jenni
  
  Published by: Jenni on October 12, 2012 04:09

  Hello

  Edit your table attributes and go change the series in the chart.
  There you should find attribute 'Maximum lines'. Increase this value

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Manipulate the graduations to get finer resolution labeled tick when you zoom in the graphs

  I have a need to achieve a more fine resolution of the tick labeled in my LineChart when I chose to zoom on a narrow of the chart area. It seems that JavaFX has no support to allow the labelling on the scales, only of the graduations.

  I tried to manipulate the minorTickCount property, but it has the opposite effect of what I'm looking for. For example, to increase the number of minor counties does not reduce the distance between the points of major ticks in terms of value of the axis, and I see no obvious way to actually manipulate what should be the distance between the minor graduations / major in terms of value of the axis. This seems all managed by JavaFX, which is too rigid for my taste.

  I really need to find some sort of solution here, I can't have my axes basically get labeled when the zoom is pretty high for all main scale applies do not at all.

  Does anyone have any ideas? This value opens a feature request for--or already exist? I want to be able to manipulate these axes / ticks more than I currently seem to be able to.

  I have never tried to do something like that, but documentation of the API it seems that NumberAxis.setTickUnit (...) must realize what you need (it sets the distance, in units of the axis between the graduations main brands). You could link it to a dependent value upper and lower too, if necessary.

  Another option would be to subclass NumberAxis and override the calculateTickValues method, although it sounds like it might be difficult.

• Open lines additional drawing on the Smith chart

  If someone could tell me why the plot of smith, projected in the attached VI has drawn additional ones on a beautiful I would be eternally grateful. If you change the line style to be fair "points", you can see that there is no notes right, but once you show "points and lines" he draws.

  

  I never could solve this problem and also noticed that the smith abacus was very slow with high frequency vectors. I also had to write my own ground visibility check boxes in a ListBox etc and got sick of it. Here is the code for the trace on a XY chart if you wish. I'll probably just set a background image of an abacus of smith and does not allow users to zoom the background image is not zoom in, but it's much nicer than this picture in my view control and very simple.

  

• Limit number of series bar chart

  I wonder if there is a limit to how many possible series on a chart in APEX 4.0 (specifically the bar chart). It works fine when I have until 5 series on the chart. After that, does not load the chart. I have not seen anywhere that says that I am limited to 5 series in a chart. Can anyone confirm this?
  
  Thank you!

  Hi Chris,

  Looks like you can be hitting bug 10307954, relating to the rendering of histograms > 5 series, which has been fixed in our 4.0.2 patch release. To confirm this, could you please put a testcase together on apex.oracle.com. If you can't reproduce the problem on our hosted instance, then this would lead me to believe that the application of the patch 4.0.2 to your instance will solve the problem. However, if you still encounter the same behavior on apex.oracle.com, then please post your credentials to the workspace and I gladly take a look.

  Kind regards
  Hilary

• to limit the values in the chart

  I want only top 10 accounts to display in the chart based on their balances and I created a calculated column in the results ranking and added the same graph. But I want only first 10 rows instead of every row to display. Thanks in advance

  If this to IR as follows.

  Create a Table of results.
  Set filter/limit on column of row to the value you want.
  Build the graph of Table

  -wayne

• How can I put an upper limit and lower limit on the chart inside a while loop?

  Need some help here. I'm working on a project, I collected data thru OR myDAQ, draw a waveform graph, is possible to add a limit upper and lower the table on waveform? I tried ways but can't seem to work. Any help is appreciated thank you.

  
  

• Limit default color for the chart of OBIEE 11 g

  Hi, I'm using OBIEE 11 g (11.1.1.6.6)
  
  When I use a graph (bar or pie), I note that OBIEE was only 12 colors by default to use in the chart. So it starts from blue, red, and so on, until the 12 color, then color 13 it will use the same blue once again, and so on.
  
  The problem is that my column values are more than 12 (it could be 20, maybe 30, etc.). Thus, the color repeatedly makes no sense for graphics.
  
  Could someone advise me please on how to increase the default number of default colors used by OBIEE (so that it will be like 50 default color set automatically by OBIEE,) just in case?
  
  Thank you very much!

  Stewart,

  the current graphics engine supports no more than 12 different colors predefined in venous thrombosis deep-graphic - skin.xml.

  MOS [ID 1403233.1 | https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=117742688180992&type=DOCUMENT&id=1403233.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=bolbx0a6e_165]
  >
  # If you set less than 12 colors (for example only 6 colors), OBIEE will use the Oracle default colors for color n ° 7 to 12. Namely, your first 6 colors will not be repeated if you have more than 6 slices in Bie graphics for example.
  # If you set more than 12 colors, OBIEE completely ignores your defined colors.

• SQL log file grows to limit, but it can be narrowed and used space is listed as 1%.

  Hello.

  3 guests ESXi 5.1.0 1463097 in a cluster.

  MS SQL 2008 R2 server (SQL Server 10.50.2500) on a Standard VM MS Windows 2008 R2 server.

  VIM_SQLEXP instance name

  Name of the comic: VIM_VCDB.

  Recovery mode: Simple

  DB 1 MB, unrestricted growth. Current database size: 3887MB

  Log growth of 10%, limited to 4 GB maximum size after shrink this morning BUT 2MB

  Every morning the logfile has run nearly full but the VMware VirtualCenter Server service runs and I can start the vSphere Client. I know not if I do not shrink the log, the service will stop later today or tomorrow.

  I studied and followed

  Determine where growth occurs in the VMware vCenter Server (1028356) database.

  SQL Server recovery mode affect the Transaction log space required (1001046)

  Troubleshooting of transaction logs on a Microsoft SQL database server (1003980)

  but I do not see any table more than many. I see that VPX_EVENT has increased about 28 MB at night, but nothing else seems alarming.

  Any ideas what it could be?

  Best regards

  Peter Lageri Rasch

  Denmark

  Hello

  Some time ago I had a similar situation as you.

  I recommend you to check this carefully, it might be useful:

  Troubleshooting when the vcenter db transaction log is full (MS SQL server 2005 express)

  Best regards

  Pablo

• How to create a chart using two independent loops while?

  Hello world

  I'm currently developing a program for the acquisition of data. In this program, I have two independent, while loops that each output a number of type double with each iteration of the loop. I am able to successfully create two independent waveform graphs (data / time) for each of the loops when placed inside. However, I now want to create a live data xy chart (the output of a loop is x and the output of the other is there).

  I have a problem, that the distinct nature of loops... When I try to extract data outside of the loop (naturally), it is not refresh with each iteration of the loop causing the graph xy does not work in the way I intend. Is there an easy way to solve this problem? If more clarification is needed, please let me know!

  David

  If the two loops are not synchronized, exactly how do you do the xy graph, where each point, by definition, must have a value of each loop.

  1. updated when updates or the other value and combine with the last value from the other loop?
  2. updated on a constant basis with the current value of each loop?
  3. ... There are many other possibilities.

  #2 is the easiest. Simply create a third loop with a reasonable time and graph the two values via local variables. You probably also should limit the history of ranking somehow.

• HP 8562 A, acquisition, limit 600points

  Hello

  Pluggable Labview 8.5 communing by GPIB with a HP8562A Spectrum Analyzer.

  My problem is I'm limited to 600points in an acquisition, you had this situation? And if yes where does this limit?

  En measure that we can not avoid this limit, I would like to make money bands. Let me explain:

  Of I do my 90 Mhz acquisition a 115 Mhz (left on 600points), I would like to make strips of under 5 MHz (on 600 points (90-95, 95-100 100-105...). And add all of this to be more accurate.

  Currently I shows only a chart between 90 and 115, and not of I don't know how to start one this en under bandages. Can you help me?

  Thank you
  Patrice

  Hello

  You are on the English part of the forum. Thus, you must post in English here. Here is the link to the french discussion forum:

  Translation:

  I'm using LabVIEW 8.5 communicate by GPIB with a HP8562A Spectrum Analyzer.

  My problem is that when acquiring data, I am limited to 600points, anyone already encountered this situation? If so, this limit whence?

  If we are unable to avoid this limit, I would like to use strips of void. Explanation:

  I'm acquisition between 90 and 115 MHz (with 600points), and I would like to use sub band of 5 MHz (with 600points (90-95, 95-100, 100-105...). And add everything to be more precise.

  Right now, I'm only show a graph between 90 and 115, and I do not know how to divide into groups void. Can someone help me?

  Now the subject of your question, my guess is that the limit is from the way in which you get your Spectrum Analyzer data. You directly use gpib LabVIEW VIs or a pilot already made?

  I found that the 600points limit is probably due to the default value, you have to change or format you use: take a look at this post on the forum.

  To void strips, you must acquire the data of the different 5 MHz with the same settings and then you should have an array of 600 points for each void bands. Then, you can concatenate the tables by using the table of construction VI.

  Hope this will help,

• Changing chart scroll bar range

  Hello everyone

  I have a very simple question. Find attached a VI that generates a sequence of random numbers (501 items) and feed on this sequence to a XY Chart. But I have a few questions about the horizontal scroll bar. After Mar VI execution, change the maximum value of X to 300 by yourself. Now, using the scroll bar, move the chart to the right or to the left by clicking the red and yellow of the scroll bar (view attached photo) areas. However, if you move the chart by clicking on the blue buttons (left and right arrows in the scroll bar), after reaching the limit to the left (0) or right (500), if you continue by clicking on the arrows of the range will bet out of range (ie: 220 to 520; 240 to 540 or - 20 to 280; 260-40 and so on).

  I want to warn the code to do so. Even if I use the left and right arrows on the scroll bar, I want to limit the scope to a minimum of 0 and a maximum of 500. What should I do?

  Thank you

  Dan07

  

  Some Reports of updated strategic Panel remove almost all the glitter.  If I remember correctly, I would defer updates in the mouse down? event and deferred judgment in the case of timeout.  I use a shift register to vary the timeout.

  Initial timeout = - 1.  For the mouse down? set timeout to say 100 msec, case.  For cases of change of scale set timeout to 0.  In the case of a timeout, the timeout-1 value.

  When the mouse is pressed, updates are deferred.  If the event was a change of scale (ie. scroll or drag bar), repair the damage before the update of the Panel.  Otherwise, start update again after no noticeable pause.

  If I were to work, I would have the example in hand.

• Is there an upper limit on the number of points that can be plotted using a CW 3 - d graph?

  I started with one of the examples 3-d graphics available on this site. I think it's the 3-d cube (?).

  If I just use the 'Plot3DCurve' method and set the style of track to be the "point", I can trace my data set (approximately 150,000 points) OK.

  If I change the stlye of land on 'line', I get a big blank chart with the exception of the last points of support 30 000 where the plot seems correct.

  If I reduce my data set to 30,000 points seems the sytle of 'line'.

  There is NO error is returned.

  I get similar results if I select a style of track of 'surface '.

  Then...
  Is there an upper limit on the number of points that can be plotted graphic 3-d CW with a style other than the point trace «»
  "?

  Ben

  I can try to post an example this weekend, but I don't know if the scholarship will allow a 5 M attachment.

  
  

• Its narrow.

  Hello

  I bought the Clip + a month before, with the latter...

  http://www.Amazon.com/JBuds-Hi-Fi-noise-reducing-buds-black/DP/B000IG66VS/ref=sr_1_3?ie=UTF8&s=elect...

  They look much better than the default headset and the sounds of the player is great. The problem is the sound is too 'narrow', I feel coming from inside my head. I remember I had a Dalton (I think) walkman as 17 years ago, the sound comes from all around me (wide, or surround sound I guess).

  With the Clip +, I think that music is behind my eyes somewhere . I have tried many headphones, a large number of music files and I tried my computer speakers, they all the same; his shrink. The sound is excellent, but it is concentrated in the middle.

  My drive is defective please?

  The sound is close on portable players and not on the desktop? Do you use some kind of style 3d effects on your computer? If so, you probably just accustomed to him and his 'natural' seems flat.

  There are 3 solutions (if it is important to keep the Clip):

  1. install Rockbox and thrust of the sound settings > stereo width. You can also try intercommunication.

  2. get the best headphones. Unfortunately, those below $ 50 is most terrible, your $25 which may even have a wiring defects, making her dish.

  Those with acceptable quality start around $70-80, more decent cost about $100-150. If $25 isn't your deduction limit to the rock solid, you could read comments about some of them here, $80 head-Direct RE0 could be a good budget choice. The $80 Hippo VB are also interesting.

  Before to pay the money, go to a store, ask to test some expensive phones & plug in your device to check if they help at all. It migh be something wrong with the release, your head or even the universe.

  3. slowly lower the level of 3d fx you commonly use. While some of them adds a nice touch to higher levels it is not only natural, but adds a lot of artifacts as well.

• More analysis charts

  Is it possible to create charts more in a separate analysis of the value of some columns?

  For example: in an analysis of incoming international calls, I have three columns: date, country of origin of the call, the number of calls.

  I have create one analyzes all columns but I want multiple charts (one per country) with the number of calls received from countries of tha.

  Thank you

  Best regards

  Giorgio

  If you really want a table by country not really many other options... So yes, it would need to increase the maximum number of allowed values.

  Don't remember really what's the default but it is perfectly possible that with your 30 countries you've already hit the limit...