to limit the values in the chart

Similar Questions

• How to acquire and store the values of DAQmx analog voltage (I do not want the graphic, but strings and values in a chart)?

  Hello

  How acquire and store the values of voltage DAQmx?

  I tried several code example, but they can't get the chart. I don't want to chart. I want to measure exactly the analog voltage values and record these values - as an excel chart, that contains the selected channels and voltage values.

  What the example code that I can use?

  My hardware is NI PCI-6251.

  Thank you very much.

  
  

• May not increase the value of data chart history but may decrease

  Hello

  In my application, I use 3 cards. I have 250 Hz sampling frequency on my system and I want to display a different number of seconds on my paintings.

  By default, the chart history data have 1024 points, which is second ~4.1.

  Now the problem is, if I put this value Let's say 100, it works well, is less points on the graph.

  But, If I try to back to 1024 or any value that is greater than the previous, it won't affect my chart.

  Graph will always display the lowest number of points of each value written in 'length of the graphic history ".

  Is in fact the value in the length graphic window, but it does not really affect.

  In addition, the problem is that it worked fine yesterday, but today it stopped working.

  I also have a VISA for VCP USB port, if this has something to do here, but I'm sure that's not.

  Thanks for the help and answers.

  Make sure your x-axis are the autoscale value.

• limit the number of values, you can choose in the filter

  Hi all

  Is there a way to limit the number of values, we can check in the filter response obiee? for instance in the status column, can we put the limit that only 5 States can be selected in the response of obiee.

  Appreciate your suggestions.

  Thank you

  Sushil

  Not sure it works but around something like;

  Give a note about only 5 values considered in the report;

  in the report use this column, filter on rcompte rcompte<>

• Calculation value of axis based on, click in the chart area.

  Hey there, I'm still working on my graphic feature and so far I've been able to get help on these forums.

  I need to be able to calculate the values of the corresponding axis in a click in the chart area. I see no real utility method in the NumberAxis class which will help me to do it. The only thing I can think is to get the bounds of the array and that relate to what I know about the range of the values I put in.

  It is a line chart with two NumberAxis. I want to display on click, (x, y)-value as PR. the axis of the point clicked. Is it possible that I can do this easily, or I just need to design a work around?

  Yes, it's a little tricky, but not too bad. It would be probably good for XYChart have public X getXValue (Point2D) and the public methods of getYValue (Point2D) Y. This works, however:

  import javafx.application.Application;
  import javafx.event.EventHandler;
  import javafx.geometry.Point2D;
  import javafx.scene.Scene;
  import javafx.scene.chart.LineChart;
  import javafx.scene.chart.NumberAxis;
  import javafx.scene.chart.XYChart;
  import javafx.scene.input.MouseEvent;
  import javafx.stage.Stage;
  
  public class LineChartSample extends Application {
  
      @Override
      public void start(Stage stage) {
          stage.setTitle("Line Chart Sample");
          // defining the axes
          final NumberAxis xAxis = new NumberAxis();
          final NumberAxis yAxis = new NumberAxis();
          xAxis.setLabel("Number of Month");
          // creating the chart
          final LineChart lineChart = new LineChart(xAxis, yAxis);
  
          lineChart.setTitle("Stock Monitoring, 2010");
          // defining a series
          XYChart.Series series = new XYChart.Series<>();
          series.setName("My portfolio");
          // populating the series with data
          series.getData().add(new XYChart.Data(1, 23));
          series.getData().add(new XYChart.Data(2, 14));
          series.getData().add(new XYChart.Data(3, 15));
          series.getData().add(new XYChart.Data(4, 24));
          series.getData().add(new XYChart.Data(5, 34));
          series.getData().add(new XYChart.Data(6, 36));
          series.getData().add(new XYChart.Data(7, 22));
          series.getData().add(new XYChart.Data(8, 45));
          series.getData().add(new XYChart.Data(9, 43));
          series.getData().add(new XYChart.Data(10, 17));
          series.getData().add(new XYChart.Data(11, 29));
          series.getData().add(new XYChart.Data(12, 25));
  
          Scene scene = new Scene(lineChart, 800, 600);
          lineChart.getData().add(series);
  
          stage.setScene(scene);
          stage.show();
  
          lineChart.setOnMouseClicked(new EventHandler() {
              @Override
              public void handle(MouseEvent event) {
                  Point2D xAxisInScene = xAxis.localToScene(new Point2D(0, 0));
                  Point2D yAxisInScene = yAxis.localToScene(new Point2D(0, 0));
                  double xInScene = event.getSceneX();
                  double yInScene = event.getSceneY();
                  double x = (xInScene - xAxisInScene.getX()) / xAxis.getScale() + xAxis.getLowerBound();
                  double y = yAxis.getUpperBound() + (yInScene - yAxisInScene.getY()) / yAxis.getScale();
  
                  System.out.printf("[%.1f, %.1f]%n", x, y);
              }
          });
      }
  
      public static void main(String[] args) {
          launch(args);
      }
  }
  

• Limit default color for the chart of OBIEE 11 g

  Hi, I'm using OBIEE 11 g (11.1.1.6.6)
  
  When I use a graph (bar or pie), I note that OBIEE was only 12 colors by default to use in the chart. So it starts from blue, red, and so on, until the 12 color, then color 13 it will use the same blue once again, and so on.
  
  The problem is that my column values are more than 12 (it could be 20, maybe 30, etc.). Thus, the color repeatedly makes no sense for graphics.
  
  Could someone advise me please on how to increase the default number of default colors used by OBIEE (so that it will be like 50 default color set automatically by OBIEE,) just in case?
  
  Thank you very much!

  Stewart,

  the current graphics engine supports no more than 12 different colors predefined in venous thrombosis deep-graphic - skin.xml.

  MOS [ID 1403233.1 | https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=117742688180992&type=DOCUMENT&id=1403233.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=bolbx0a6e_165]
  >
  # If you set less than 12 colors (for example only 6 colors), OBIEE will use the Oracle default colors for color n ° 7 to 12. Namely, your first 6 colors will not be repeated if you have more than 6 slices in Bie graphics for example.
  # If you set more than 12 colors, OBIEE completely ignores your defined colors.

• You cannot change the chart value axis when there are several types of graphics in a single diagram

  Illustrator can do graphics with bars and lines / columns, for example in the docs:

  

  http://help.Adobe.com/en_US/Illustrator/CS/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html

  However, when I create a chart like this, I seem to lose the ability to manually set the y-axis using 'override calculated values.

  To reproduce this problem:

  1. Create a chart as in the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers as well as the lines align perfectly - have a go until just less than 20, a up to a little less than 250, therefore it do not markers and the number of divisions on each side.
  2. Try to make the markers and numbers of divisions to the height, so in fact, the side that is going up 20 going up to 25 and has the same number of divisions on the other side.

  Everything I have tried does not work:

  • If I select the entire chart and go to the "Chart Type", I can not set the options for the value axis. In earlier versions, it's gray, in CS6 I can access, but clicking on 'OK' does nothing.
  • If I select the entire chart and chose the type of a chart, I can set options for the axis value, but that the selected chart type, and then applies the entire table.
  • If I use the direct Selection tool to select one of the series and open the "Chart Type" options, changing the options of the y-axis has no effect
  • If I use the direct Selection tool to select all series that share an axis and open the "Chart Type" options, changing the options of the y-axis always has no effect
  • If I use the direct Selection tool to select the Group of ticks axis itself, or the axis line and groups of ticks axis themselves, of axis labels, axis and graduations of the axis line, or axis labels, axis line, graduations of the axis and series of related data, etc., by changing the options of the axis also has no effect

  It seems that this feature is broken and it seems that the example in the manual has been carefully chosen to use a rare combination of numbers where it would actually look right.

  I thought about it. Like everything to do with the horrible ancient neglected graphic Illustrator tool, it is ridiculously clumsy and involves the caution around what is shamefully bad programming for a professional expensive product.

  It is timing - to do things in a sequence of rigid counterintuitive that seems not to work then meets at the end:

  1. Create the chart but, for now, keep all the same chart type. If you've already set to have different graphics types, put the same thing for now.
  2. Select the entire chart and in the main window of Chart Types, set the value to "Both sides" axis
  3. In the drop-down menu, there should be a left and right axis (or top and bottom...). Set the parameters of the value axis for these now. It will look like it does for a single axis, because it will not change the other axis - naked with her...
  4. Select the data series you want to use the other axis using group selection. Go to graph Type and the value of the y-axis to the other and set the chart type that you want. All of a sudden all be put in place.
  5. If you need to change the settings for the value axis, select the entire chart, set the whole chart type to a chart, change the appropriate value axis by choosing it from the menu drop down and the re - apply types of graph as above.

  (the bug is - it should not necessary to set the graphic object to only have only one chart of type in order to access the axis options of value for two different y-axis)

• CFCHART: Remove values outside the chart areas

  Hello

  I use cfchart to build a pie chart, as well

  < chartwidth cfchart = '400 '.
  format = "jpg".
  ShowLegend = "false" >
  
  < cfchartseries type = "pie".
  Query = "users".
  ValueColumn = 'age '.
  PostesColonne = "name" >
  
  < / cfchart >

  However the circular diagram shows, and a number is presented outside the graph to sectors for each age value returned by the database, as shown in the picture as an attachment...

  Wondering how to disable those, so only the pie chart shows... with no numbers that surrounds

  Thank you very much

  Never tried this, but "it might work" (and if it was Star Trek, it would always be):

  Try to set the attribute foregroundColor tag cfchart to the same value as your background of the chart. Try 'white' or even 'transparent '.

  -Fernis

• Limit the value of the random

  Hello
  
  is it possible to limit the number returned by a random function to 255
  
  example: select substr (to_char (round(dbms_random.value *1000)), 1, 3) of double;
  
  It can refer 548, 687 127...
  
  what I need, is that the maximum value is 255
  
  TKS

  Hi M2M.

  You can set min and max value, as follows:

  select dbms_random.value(0,255) from dual;
  

  So if you want 3-digit numbers, something like this woulkd do

  select round(dbms_random.value(100,255)) from dual;
  

  Not sure that the rounded feature would spoil the "random", but it's out of my League

  Concerning
  Peter

• Limit the number of lines A map can use

  Hello
  
  I try to use the "world/world_wo_gr.amap" card, but I'm having a problem for the page to load.
  
  When I assign a value to each countty map does not load, but when I reduce the number i.e. to countires starting with A or B or C, then the page load very well. Is there a limit on the number of rows that a card can process?
  
  I have a table with contains the country and dial code and I am just by selecting in that it contains 237 lines.
  
  This card works
  
  SELECT NULL LINK, COUNTRY LABEL, c_desc
  FROM (select the country "Country Code - ' |") ISO_COUNTRY_CODES |', dial the Code - ' | COUNTRY_CODE CC_INFO c_desc
  where substr (country, 1, 1) in ('A', 'B', 'C'))
  
  http://Apex.Oracle.com/pls/Apex/f?p=16335:4
  
  
  
  but this map fails to load completely
  
  SELECT NULL LINK, COUNTRY LABEL, c_desc
  FROM (select the country "Country Code - ' |") ISO_COUNTRY_CODES |', dial the Code - ' | COUNTRY_CODE CC_INFO c_desc)
  
  http://Apex.Oracle.com/pls/Apex/f?p=16335:6
  
  
  
  
  Any ideas?

  Hi Andy,.

  You have reached a limit that has been put in APEX 4.0 on the maximum number of rows retrieved for a query of card. That limit was not enough high for examples like the one you reported, where the result set could potentially return 200 + folders for all points on the selected card. This limit has been removed in the APEX 4.0.1 and you will now be able to retrieve the complete set of results for your card. By default, the lines in the map Wizard max will be now set to 300, but that can be changed on the page "Query" in the wizard, or on the page of the map, as for the chart series. Sorry for the inconvenience, Andy, but the solution will be available in our next version 4.0.1 patch APEX.

  Kind regards
  Hilary

• How can I limit the number of Web sites on the new tab page?

  Is there a setting where I can limit the number of thumbnails / Web sites that appear on the new tab page? When I opened a new tab - I don't want to see tons of sites I have visited - but also, I don't want to delete them all. For example - there is a setting where the new tab page displays the last ten sites I've visited - with all my pinned sites?

  There are two settings 'hidden' for this 'grid '.

  Browser.newtabpage.Columns
  
  and
  
  Browser.newtabpage.Rows

  Type of topic: config in the URL bar and press ENTER.
  
  So put . browser.newtabpage in the top search bar.

  Each of these preferences in the lower panel right-click and select Edit. Then change the value default of 3 for each of these preferences to what you prefer, for "pinned" both sites all browsing history you want to appear in the 'grid '.

• Limit the decimals

  For some values of less than one my data sheets of often list an appalling number of digits for the measured value. Is there a way to limit the significant digits or the fractional part numbers shown on the card? The preference would be to two digits to the right of the decimal point. I have a VI that will do, but do not want to filter each reading.

  Thank you

  JVH

  I know exactly what you're talking about, I had a lot of complaints about this operators wondering why a DMM measure out a few 10-digit precision.

  TestStand 4.0, click on your stage of numerical limit.  Click the tab limits, and then select the arrow next to the number Format drop-down list.  Select custom, this opens the window of Digital Format.  In here, you can select various options for the display of the data.  See the attachment for a page where I put 2 digits of precision.

  Thank you

  Paul Holztrichter

• Use the listbox control to select several channels and display on the chart

  Hello everyone!

  I have a problem using the ListBox selection mode 1 or mode items. I have 6 channels of data, and I have a 2D chart. I am able to reterieve the signal names in the list box, but I want to be able to choose one or more signals to display on the chart. I used the table to index my 2D data are connected and then the output of the index table is connected to the graph. I had to use the listbox control as an index for the table to index and display the data in the index selected for display on the chart. I used lisbox as the value property nodes, the line active and all but not able to display signals on the graph. I have attached a code example to show you what exactly I'm looking.

  Any suggestions will help a lot.

  
  

• How to limit the rules (CPU usage) doesn't include a few servers (IP)

  Hello

  There are few servers who always raised processor and we do not generate alerts for servers, but we need to get the statistics of CPU in the FMS, is there a way I can limit the rules (i.e., the CPU utilization) to not stand for these servers.

  Thank you

  Shashank Soni.

  Hello

  You can change the definition of the rule to exclude certain hosts.

  In this example, we add a condition by saying that the does not apply to a specific host, or hosts.
  Note that you may need to replace the name of the property with the property that designates the host name.

  

  You can also check the host name in the status itself

  

  Another option you have is to find the variable being compared and it scope (give it a very high value for specific hosts.

  

  I hope this helps.

  Golan

• How to limit the appeal of Web service method when the page loads?

  Hello

  I have an a choice selection list that is populated using a web service method. There are several different lists on the page. When a page loads, all of these methods of service web (methods are inside the POJO class) are executed.

  I would like to limit the call to the web service methods. The call occurs even if the component is not rendered. Basically, all methods in the page links are executed during the loading of the page. Is there a way to limit this behavior?

  More time is consumed during the loading of the page. Can someone help me on this?

  JDeveloper Version: 11.1.1.7.1

  Thank you
  Malenfant.

  You can play with the value of the condition of discount for links - see for example:

  https://blogs.Oracle.com/Shay/entry/delay_method_execution_when_us