NASCAR "Sprint Cup Mobile" Audio

Similar Questions

• Mobile audio problem of chronology

  I am new to Premiere Pro and I'm having a problem I feel is simple and I should be able to solve, but I can't.

  I imported the 1080/60 p media from my Panasonic SC-X900M into a new project in Premiere Pro CS6.  The audio is surround 5.1, according to the manual of Panasonic, and if I right click on any file, as 'Properties', it says "Source Audio Format: - compressed - 48000 Hz 6 channels; Project Audio format: comma floating 48000 Hz - 32 bit - 6 channels. »

  Here is a screenshot of the default timeline set up on the original project:

  

  If I drag a clip from the source to the timeline monitor, the video goes to Video 1 (title V) and audio in Audio 4 (section A1), and everything seems fine, the timeline plays very well.  However, it I move clip any other way (for example Insert button in the source monitor or keyboard shortcut), only the video is moved, the audio does not appear in the timeline.

  Naively, I think that the problem may be related to the fact that Audio 1 highlight and Audio 4 is not, but I do not see how to change, nor I know even if it's relevant.

  Any help is appreciated greatly.  Be as specific as possible, don't assume that I don't know!

  You need to target the Audio track as wel as the video track.

  Note that your video 1 layer is grey (IE targeted).

  Click on the same area (column) in the audio track

• BlackBerry smartphones can not remove an additional icon that resembles the icon browser (Earth)!

  Recently, an additional icon that resembles the browser (Earth) icon appeared in my icon page.  It says Mobile of NASCAR Sprint Cup, I don't even like NASCAR... lol... I tried, and if sprint technicians tried everything... Cannot remove it. We have removed the maintenance for this icon book and he returned whenever there is a reboot or battery pull. I tried to install it, hoping that it works... He moved says "error HTTP 404: not found.» This page you are trying to load is not found. Please try loading a different page.  That I have and that's technicians, we tried uploading directly from the site of sprint store, hoping once downloaded, this icon disappears... Then we could delete, but nothing. I wouldn't mind just hide this darn icon, but since it's appearance, it freezes a few apps. They sent me another one BB and the same thing appeared. I am at a loss... It's the sprint technicians. I want this icon... HELP Please

  I have this problem too, on the Pearl 8130.  My device is low on resources to start.

• ERROR: Apple iPhone upgrade program-Apple store do not activate the phone or sell me IUP

  So I went on the launch day after waiting inline for more than 90 minutes for a booking of IUP.

  I booked an iPhone ATT 7 because there is no available T Mobile phone because I really wanted to participate in the program of upgrade.

  This forum said I could just swap the ATT with TMO, when I arrived at the store - BAD!

  The representative of the store Apple says if I booked a phone ATT should I start or use an existing att.

  He could just let me no Exchange TMO SIM I had...

  Bank of IUP and the citizen requires the carrier be activated in order to get their hands on the IUP program, he said.

  Suppose that there is little money 'trunk' back-end that Apple and the Bank are paid by the carrier?

  I ended up buying the phone outright without AppleCare and came out with a pay phone.  Sold the next day to a friend who wanted a 7 +.

  So now I'm waiting for Apple to repopulate the TMO phones...

  So beware that you can't just swap SIM cards as previously reported by other members of the forum!

  I thought that the FAQ made quite clearly. - http://www.apple.com/shop/iphone/iphone-upgrade-program. If you wish to register by using the payment plan (my emphasis added):

  When I buy with the iPhone Upgrade Program, is my iPhone 'unlocked '?

  Yes. You can select a new mobile provider or stick to one you have. , We activate your iPhone on your choice of AT & T, Sprint, T-Mobile and Verizon. Once your iPhone is activated, it remains unlocked.

  If you pay in full in and out of the phone (and not enroll in the program to upgrade at all), so no activation is required as part of this process, and you can then throw the SIM included and exposed to one of your choice.

  Since it was announced, the program of upgrading the range always said that you can not leave the store without activation of the service with a participating carrier. However, you are not under any contract and can cancel this service, as you wish. Your device is not locked to the holder of the SIM card, it came with.

• iPhone IS - what model is the phone of "Global"?

  Hello

  I am very interested in the iPhone (SE) and intend to buy at the price high. I intend to use T-Mobile as carrier in the United States and also use it when I travel to the Japan and Hong and buy the sim card in these countries and pop in the phone to at least be able to use LTE data, so that it is the CDMA phone or GSM does not concern me as much as the voice call is not so important (I can get by him using VOIP like Skype). I don't want to use roaming when I'm abroad.

  According to the page to support LTE, http://www.apple.com/iphone/LTE/, there are 2 models, A1662 A1723.

  After the online chat with the Apple support, they told me have chosen Sprint as mobile provider will make me the A1723 and other options - at & t, Verizon, T-Mobile, Sim free will make me the A1662.

  Since I want to use T-Mobile in the United States, if my understanding is that only A1662 is supported. But, according to http://www.apple.com/iphone/LTE/, support to the Japan LTE networks are not listed for A1662.

  My question is, is it really true that A1662 is not supported at the Japan? When I look at LTE bands support of these two models, the only group who lack to A1662 are:

  7 (2600 MHz)

  28 (700 MHz APT)

  38 (TD 2600)

  39 (TD 1900)

  40 (2300 TD)

  41 (2500 TD)

  Missing these bands really makes a big difference?

  I currently have iPhone 5 A1429 and successfully used in the Japan with a local SIM card and got the LTE speed, and supported by the A1429 bands are ALL supported by A1662, so I really confused.

  Thanks for reading my long question and hope someone can help us with that.

  This article in PC magazine answers this question http://www.pcmag.com/news/343091/the-iphone-se-is-not-carrier-agnostic

  Basically, it says that the two models sold in the United States will work in the world, but if you buy version Verizon, ATT or TMobil in the States, which are all the same phone, A1662, there the slowest speeds LTE overseas (the Canada and the Russia are mentioned in the article), since it lacks broadband LTE 13.

  The phone Sprint to the United States is another phone, model A1723, and it is the same model sold overseas (except China, which gets its own phone, model A1724), but the Sprint phone does not work on Verizon (lack band 13), and missing also band 29, so it will work on ATT, he won't go to maximum speed for data Although it works perfectly on Tmobil.

  So the simple answer is that all US phones will work abroad, but buy the Sprint phone in the United States is to purchase high speed for global use of the data and that the phone also works on fine Tmobil and ATT, but at speeds slower data, but it will not work on Verizon.

• Error in the launch of TES Oblivion. It reads: failed to initialize renderer. NiXAdapterDesc::GetDeviceCaps () failed.

  Here's the thing.

  I had just recently completely reinstall Vista on my Dell Inspiron 1521 because recently there KSoD was (BlacK S Of Death creen). I was told that I also had to reinstall my Drivers and Utilities. I had Windows running after that I reinstalled Vista (finally able to reach the screen connection.) and then tried to install The Elder Scrolls IV: Oblivion, I got some kind of error message during installation and when I clicked okay, it shut out of the whole thing. So, I took my friends advice and jumped into the CD Drivers and Utilities that came with my Dell. I extracted, unpacked and installed all the drivers available on the menu (except those who say such as Verizon, Sprint, T-Mobile on them, I don't think that those who are very important, so I only did those those.). After that I did, so I took another slap at reinstalled Oblivion. This time, he actually completed the installation. I was so excited, I clicked on the logo of oblivion on my desk, and when this menu appeared with classical music (the one that offers you the options game, Options, data files, Technical Support, etc.) I clicked Play and then the black window appears as if its going to work and then just stops and this error message is displayed: failed to initialize renderer. NiXAdapaterDesc::GetDeviceCaps() failed. Then everything closes, I tried several times and got the same results each time.

  The main reason I'm being so complete in this regard is to let you know EXACTLY what I could probably help find the problem. Another thing... I'm absolutely stupid with computers, I tried Googling the error message and I found sites where people have had the same problem but they have started talking about all this driver stuff I didn't understand even remotely. I have NO Internet on my computer, unless there is a way to disconnect a cable from my PC at home and connect it to my laptop so it won't be (could this work? If so which cable I have unplug my pc at home and my laptop? Never tried it before.). So I ask, if anyone out there who is willing to help has the answer to my problem, could you tell me how to solve this problem, as if you were talking to a 6 year old? That or just make so that even the dumbest, most computer-illiteriate person could understand. I know almost nothing about all this stuff of pilot. When I reinstalled the drivers on my pc I just follow the instructions step by step that my friend gave me, but had next to no knowledge of what exactly I was doing.

  EDIT: I played oblivion on my PC countless times before KSoD would have on me without any problems at all except that it could be a bit of lag... That's all. It has completely worked until I got the black screen of death on my Dell Inspiron 1521 and had to reinstall vista and all the drivers.

  Hello DJS4400,

  Thank you for using the Microsoft Windows Vista Forums.
   
  GetDeviceCaps() is a DirectX routine call made by the game engine for you check the details of the video card, what it is capable of supporting, and after that the game engine make certain decisions about what all the things to initialize for her. If that is a failure, it means that the game engine is not able to read your video card correctly.
  Most likely, this would be a problem with the drivers and of course, could be a problem with the card itself.

  Try running another game and see if it works. If it isn't, definity your drivers need a second look. If it does, this means, oblivion has a problem with the drivers you are using, or else they have not been installed correctly.

  I would first try:

  Click Start-> then type ' Device Manager "in the field of research-> game controller, select device-> next Manager, select sound and video-> This will drop your card-> with the right button on the map and you should have an option to update the drivers."  Once you repeat this test.

  If still no luck, right click again on the map and select Uninstall (you may have to restart after that) and then return to the driver and reinstall.   In most cases if you need to reboot, when your computer starts it will try updating the driver automatically from the site.

  Please let us know status.  Thank you!
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Please help set up my wireless router. hard reset ruined.

  I have a Wireless-g router broadband model # WRT54GS2, the source of the internet is a Sprint card mobile broadband px-500 that plugs into my laptop.  The router and connection worked very well until someone hit the hard reset on the router button.  I have configured the router using the provided installation cd.  After the reset button has been affected, I tried to use the cd to resolve the connection problem but, I can't use the cd because it repeat 301 error: internal error.  Is there something I can do to set up the router again and get the connection going manually?  I can recognize and connect to the wireless using a computer laptop, it says it's connected, but the connection does not work, I can't go on the internet.  How can I fix this?!  THX!

  -Also, I know how to get on the web based Setup by putting my ip address in the browser but, I don't know how to fix my connection problem.  Here's my info:

  Windows IP configuration

  Host name: mast

  Dns suffix... :

  ... Node type: unknown

  Active... IP routing: Yes

  Active... proxy WINS: No.

  Search list of DNS suffixes...: mshome .net

  Ethernet wireless network connection card:

  Suffix the connection-specific DNS...:

  ... Description: Intel(r) PRO/wireless 3945ABG Network connection

  Physical address: 00-13-02-A1-D9-D6

  DHCP active...: Yes

  autoconfiguration enabled...: Yes

  ... IP address: 192.168.1.100

  ... The subnet mask: 255.255.255.0

  ... Default gateway: 192.168.1.1

  ... DHCP server: 192.168.1.1

  ... DNS server: 192.168.1.1

  lease obtained... Thursday, January 14, 2010 10:30

  end of the lease. Friday, January 15, 2010 10:30

  Pantech-PPP adapter mobile sprint to wide band:

  suffix the connection-specific DNS...:

  ... Description: WAN (PPP/SLIP) Interface

  Physical address: 00-53-45-00-00-00

  DHCP active...: No.

  ... IP address: 173.XXX.XXX. XX

  ... subnet mask: 255.255.255.255

  ... default gateway: 173.XXX.XXX. XX

  DNS servers...: 68.XX. XX. XX (& below him a one) extra 68.XX. XX. XX

  NetBios over TCP/IP...: disabled

  It turns out that I just had to disable DHCP.  I solved the same problem using 4 different methods, the same way never works twice.  Computers make zero sense to me.

• Devices does not connect wireless. Validation of identity?

  I have a Wireless-g router broadband model # WRT54GS2, the source of the internet is a Sprint card mobile broadband px-500 that plugs into my laptop.  The router and connection worked very well until someone hit the hard reset on the router button.  I have configured the router using the provided installation cd.  After the reset button has been affected, I tried to use the cd to resolve the connection problem but, I can't use the cd because it repeat 301 error: internal error.  Is there something I can do to set up the router again and get the connection going manually?  I can connect to the wireless using a laptop but it says validation of identity, and the connection will not work.  How can I fix this?!  THX!

  -Also, I know how to get on the web based Setup by putting my ip address in the browser but, I don't know how to fix my connection problem.

  With the computer connected wireless to your router, open the web interface at http://192.168.1.1/ the default password is "admin". Now, perform the following steps:

  1. change the address LAN IP of 192.168.1.1 to 192.168.0.254 WRT.
  2. on the same page, disable the DHCP server.
  3. save the settings. You will lose the connection.

  4. connect one of the LAN ports numbered from the WRT to the ethernet port on your computer with the card Strip. Do not use the internet port of the WRT!

  That should do it. Now all your other computers can connect to the internet through the computer with the card Strip.

  Remember that from now on, you need to configure the WRT on http://192.168.0.254/ also don't forget to secure the router, either change the default password on the Administration and a separate SSID page and enable security wireless WPA2 with a password hard.

• Messed up Smartphones blackBerry Media Player

  Since Wednesday night, I was not able to use the media player in my BB 8320 curve. That night, I was listening to a show via MLB Gameday Mobile audio player. Some sort of glitch that occurred during the game and gave rise to an error in Media Player. Since then, no audio web site will play in the media player; the BB is trying to open web sites in Media Player, but it still results in an error message. Any advice is welcome. Thank you.

  First, do a reset of the device: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  Now, try again.

• Inline CSS to override rc-title

  I modified the code rc-title (title of the region) through FireBug to change the color of the title text several times:

  (1) what is the syntax/format to create a line of CSS to do the replacement in my area?

  < div class = "rc-title" > mobility Creative ads < font color = "blue" > AT & amp; T - blue, < font color = "black" > < font color = "#FF00FF" > Sprint - black T-Mobile - rose, < font color = "red" > Verizon - Red

  < font color = "black" > < / police > < / div >

  See the picture of what I'm trying to do below:

  http://marketmixmodeling.NET/images/Colored_rctitle.PNG

  First I must point out to close the tag before opening a new.

  So it should look more like this:

  Blue AT & T -, Sprint, etc...

  This approach should work just fine, the name of your region. You don't have to use CSS to do this.

  However, with CSS, the title of your area, it might look like this:

  Mobility Creative Ads AT&T, Sprint, T-Mobile
  

  Then the field of line in the CSS section in your definition of the page.

  .mca_att {color: blue;}
  .mca_sprint {color: #000000;}
  .mca_tmobile {color: #FF00FF;}
  

  If you're on APEX 4.1 or earlier, the CSS above goes on the definition of the page HTML header field.  AND place everything inside tags.

  Thank you

  -Jorge

  http://rimblas.com/blog/

• Sound does not work in the iOS

  I got a warning saying that the audio preloader would not work in iOS (7.1.1) - However, I get no audio at all. Is this normal?

  Hi, in mobile audio devices must begin with the users.  All auto play dosen´t work. You need a button to play the audio file concerning the Caisse

• Videos of the Nokia N8 and Prime CS5.5

  Hello

  My name is Angel Guerrero and my problem is the following:

  When I want to load on first cs5.5. videos captured in Nokia N8 mobile audio offsets of the video signal. This has happened since the source monitor and continues in the timeline panel and so in the master monitor.

  Nokia N9 video format is 1280 x 720 (1.0) .mp4 24.x frames per second.

  Here is a small sample for download:

  http://www.mediafire.com/?8pd5pz6jyzkydc6

  
  My Pc has

  Windows 7 Professional 64 bit

  8 GB RAM

  RAID 0 1 TB on the system and 2 additional drives of 1 TB each.

  HP Full HD 1080 p monitor

  Nvidia GeFroce GTX570-PNY graphics card

  in advance thank you very much

  There is always a little quality loss during transcoding. However, I don't think it's very noticeable.

  If you need support for your camera, please fill a feature request: http://www.adobe.com/go/wish

• A Virgin Mobile iPhone SIM card 5 could be integrated into an iPhone SE for the Sprint.

  I currently have an iPhone 5 to Virgin Mobile, I want to update an iPhone, but Virgin Mobile does not currently offer the iPhone SE. If I bought an iPhone for Sprint SE (Virgin Mobile is owned by Sprint) will fit my old SIM to the iPhone 5?

  No, because even if Virgin Mobile are owned by Sprint, they are a different society and in addition, we must remember that the Sprint is a CDMA provider and Virgin Mobile are GSM, so if you want a new iPhone, then perhaps to cancel your contract with Virgin Mobile and a contract with another supplier of GSM like AT & T or T-Mobile.

  If you wanted a CDMA provider, then you can take a look at Verizon.

• How can I change my carrier from sprint to t-mobile?

  How can I change my carrier from sprint to t-mobile? I have an iPhone 5

  T-Mobile call and tell them you want to switch from Sprint. I'm sure they would be happy to help.

  http://www.t-mobile.com/offer/switch-carriers-no-early-termination-fee.html

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/