Please help set up my wireless router. hard reset ruined.

Similar Questions

• I can't delete the properties of the proxy server on my HP G60 Windows Vista laptop. Need help to access my wireless router.

  I'd appreciate any help or information that may help me set my Internet Options on my IE LAN settings. The configuration that I need to adjust consists of set the network settings on Auto instead of the designated inputs.

  Hi JoseGarza,

  You can follow these links to configure the wireless router & check if it helps.

  Set up a wireless router

  Setting up a wireless network

  Hope the helps of information.
  Please post back and we do know.

• help identify my mobile wireless router information

  I have connected to a friends wireless router and my computer saved the information to reconnect. now he used to coneect at all... How can I find the router on my laptop and remove it?

  Type 'Network' in the search box of the start menu. Click on "network and sharing Center." Click on 'Manage wireless networks' in the list on the left side.

• I need help to set up my wireless router

  When I insert the CD to install the Wireless G Broadband Router (linksys by Cisco) the installation process does not start automatically - what should I do?

  I have Windows Vista

  Thank you

  Bonnie

  Hello

  ·          You are to return to the AutoPlay feature in Windows Vista?

  I suggest you to enable the auto-play feature and then check.

  Change AutoPlay settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  You can also contact the manufacturer for assistance on this issue.

  http://homesupport.Cisco.com/en-us/wireless/LBC/wrt54G

  See also:

  AutoPlay: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• Please help with Photosmart C4795 Wireless

  Hi, I have tried everything and can't seem to get this printer works wirelessly. I followed the instructions step by step, at least 4 times. The blue (wireless) light on the printer is on, the printer is recognized by my router (wireles Belkin n +), my software (McAffee) has also recognized the printer. When I do the installation of the printer, everything happening. I am able to print the report of wireless network and everything goes as well as it lists the good SSID and information.

  I use Windows 7 Home Premium. When I try to print the printer icon appears (it clearly says "printing") and after 1 minute it just tells me "error-printing".

  Solution Center HP also tells me that the printer is connected and active without error... Please if you have an idea on what could be the problem, I'd be happy.

  Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

• Need help with RangePlus WRT110 wireless router

  Whenever someone on my laptop when my computer is turned on, I get an interference of connection for about 1 minute, then everything returns to normal.  How can I fix?

  I think maybe it's because your two computers are the same IP address of your router, it's why you get disconnected when your other computer is turned on. So I think you can set a static IP address to your desktop in order to solve this problem. Follow the instructions how to give static IP for your XP computer.

  Click the Start button > settings > Panel > Network Connections - right click on the icon for the local area network connection and go to properties - in the "Général" tab select "TCP/IP Internet Protocol" and click on the properties button - select "use IP address following" - provide the IP - 192.168.1.5 - subnet mask 255.255.255.0 default gateway - 192.168.1.1 - favorite DNS 192.168.1.1 DNS - auxiliary 4.2.2.2 > click the Ok button to save and click 'Close' on the main properties window.

  After that try to go online from your desktop computer, once you're around online on your other computer and check whether you are experiencing the same problem.

• Help to connect a wireless router. Question of address/LAN IP.

  I'm trying to set up a router without wire-gbroadband of Linksys (model wrt54g2) to my dell dimension e310 desktop. Follow the 4 easy steps to pluging in there and get an error message saying that it is not detected. Tried to reset and reconnect. At the command ipconfig with a dell oncall support, who told me that my ip address is invalid, and something about the connection to the local network. So my question now. I'm obviously connected to the internet, how can I have an invalid ip address? Should I contact my internet service provider (comcast) on this subject? Also how do you know it that the LAN is connected correctly? I was told that it must be in automatic mode. I go to network connections and have Local Area Connection (the network connection intel pro/100 ve) and local area (rca usb cable modem), all Connection2 two connected. What should be the settings on these?

  C:\Documents and Settings\ * > ipconfig

  Windows IP configuration

  Ethernet connection to the network space 2 card:

  The connection-specific DNS suffix. : hsd1. **. .NET.
  IP address: 68.* *. ***. **
  ... Subnet mask: 255.* *. *. *.
  ... Default gateway. : 68.**.***.*

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  IP address: 192.*. * *. ***
  ... Subnet mask: 255.* *. *. *.
  ... Default gateway. :

  C:\Documents and Settings\ * > _

  Message edited by mike701 on 11/10/2008 22:16
  
  

• Please HELP Access Connections: No Wireless Network found-> error code 117

  Hello

  Lenovo 3000 N1000 with 1 GB Ram, Win XP SP2, bought in May 2006. WIFI network with WPA - PSK key worked without any problems so far and is still accessible with the PC.

  After the transfer of music through my mobile to my mobile Bluetooth maps network seems to be disconnected. Dial-up connections (AC) or Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network cards have been removed. However I can't find any problem in Device Manager as all parts are shown to work OK.

  That's what I've done so far:

  (1) radio checked turn on--->

  (2) FN + F5--> connection on

  (3) AC uninstalled, downloaded and installed the version more current (5.00 Build 7VCX32WW)

  (4) installed new version wireless driver for Intel (r) PRO/Wireless 3945ABG (version 12.0.0.82)

  Yet, even if I uninstall AC to check that if the WIFI doesn't work at all, Windows gives the message that all network components have been removed.

  Diagnose gives tool the following output:

  'Stack initialization failed wireless error code 117'

  Log file:

  Description: Intel(r) PRO/Wireless 3945ABG Network Connection
  Type: Wireless LAN adapter
  DriverVersion: 10. 5 1. 59---> why is the older version of driver?
  

  PNPID: PCI VEN_8086 & DEV_4227 & SUBSYS_10118086
  SupplicantVersion: AEGIS Protocol (IEEE 802. 1 x) v3.5.3.0

  ERROR AcSvc (SYSTEM (Prvlg).1108.4580) [3/9] 11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!

  Hope this is enough information for all of you to suggest a solution. That I have seen previous discussions, some of you have had similar problems in the past and could fix it somehow. However, I couldn't find someone with exactly the same problem.

  Thanks a lot in advance for any advice you may have.

  Flo

  Flo, welcome to the forum,

  missing icons in the Windows network connections? Thisthread may have some useful information.

• Please help - I need to add more hard disk space (I know, I screwed up in the beginning!)

  I use VMWare fusion (1.1.3) on a mac intel, and I'm running a windows xp virtual machine. I had no plan to install all programs on it, just wanted to test Web sites, but now I need to intsaller office and do not have enough disk space. Is it true that you have to use third party software to do this? Can someone please? Thank you!

  Take a look at: resizing of the ramdisks with step by step Instructions

  Also because your using the Fusion 1, you can also watch: resize virtual disk for Windows guests with step by step Instructions

• Please help me to adjust my current HARD drive configuration

  I posted this at the end of 'Guidelines for best record Setup' badly yesterday, but I think that the thread can be so long and so old my question is simply lost in the mix, so I'll go ahead and create a new post here.

  I read damage on the guidelines for the best drive configuration and its position during the installation of overhead storage for editing systems, and I have a few questions...

  First of all, I have a TON of data, much of that which I could probably check on own things upward. Here's what I have right now, and maybe you can give me some recommendations to fix things so it'll work better (my PPBM5 shows significant slowdown in the disc-land). FWIW, all internal hard drives are 7200 RPM SATA2.

  I have a WD 250 GB enterprise storage disk for my OS/programs, and I think it contains the swap file... (although I have 12 GB of Ram, so I don't know how many times it is used). This one is full of about 50%.

  I have a WD 500 GB enterprise storage drive that contains all of my graphics, photos and audio, as well as other generic data files (think documents, PDFs, etc here) it is about 60% full.

  I have a 1.0 TB WD Caviar Black for my projects/Scratch/Previews drive. This one is full of about 40%.

  I have a 2 TB RAID - 0 (from WD Enterprise storage drives 2 x 1.0TB) which contains all my data in whatever format it is arrived (most are direct capture of HDV in the first, but there is a good mix of AVCHD, R3D and various SD stuff, too). This one is full of about 95 percent.

  I also have a backup of RAID-0 WD 4TB drive which is a little over 50% full and keeps a backup complete of all the drives in my system, less the OS and programs. (FW800)

  Then I have a second drive 2 TB of single disc that I use to maintain an offsite backup of whatever I am working on projects, more important things like photos and graphics. This one is full of about 30%. (FW800)

  Then I have a third disk single disk of 1 TB, which is a general backup drive and usually remains in place and is about 80% full. (USB 2.0).

  OK, so it's where things are now. From what I read, I think I might be better off by doing the following:

  250GB for OS/programs

  500 GB for the previews/Scratch/pagefile

  3 x 1.0 to drives (non-RAID) for my projects/media OR 1.0 TB RAID3/5 for projects/media (but I'll have to find a way to archive a bunch of stuff... BluRay?)

  I've got room in my system of adding a player more and I can probably get the approval for the purchase of a disk more if I asked my boss - so if I got a 2 TB drive, I could do a 2.0 TB RAID by using two TB 1.0 discs for interlacing and the 2 TB for parity, leaving me with an extra 1.0 TB? Or should I get a disk 1 to and a 2.0 to Raid with two disks of intertwining and two for parity? I'm really not upward on things like RAID, despite reading your article on Wiki and he...

  Also, I could separate my current RAID-0 and not lose the data on it?

  Just FYI, I use RAID on Board (using the motherboard ASUS P6T6 Server) and the purchase of a RAID controller is out of the question right now...

  I edit mainly HDV/AVCHD, but I have a little RED 4 k, and I'm hoping to upgrade my HDV for the JVC GY-HM700 camera soon.

  Thanks for your advice and your expertise!

  David

  Thank you, David, which makes it much clearer. At least a lot more understandable for my mind tired now.

  Given your options (no controller raid separated, possibly one or even two additional discs), I would go for this configuration:

  C: 250 G OS & programs

  D: project photos/graphics/audio-only 500 G, using Audacity / other documents & Pagefile

  E: 1 TB projects and outputs & media Cache

  F: 3 x 1 TB Raid0 for media and previews

  The reasoning is that currently you run lack of space on your 2 drive raid0, when editing your access to current content on D will be rather small, so move your swap file can be attractive and by using the E drive for media cache, next to projects you split the load between E and F. Your drive F is growing in quality and will be faster and backups are supported with the 4 TB and off site of 2 TB drives.

• Vista does not allow to set to work at home or public Wi - Fi connection when wireless router installed

  added the wireless laptop card but can not get the plug to the top of other computers very well.  When computer wireless never did ask public value home or work

  Hello

  Remove the network profile and create a new one. Also, make sure that you have the latest drivers for your wireless network card.

  See these articles for help:
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router
  http://Windows.Microsoft.com/en-in/Windows/help/wireless-network-connection-problems-in-Windows

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Unable to connect to the wireless router

  I can't connect to my wireless router.  My PC shows that the router has an excellent signal strength. The password is correct, but it will not connect.  What Miss me.

  Moved from Explorwer Internet

  Original title: wireless network device network Ethernet network router

  Hi Trisha,

  Many routers need firmware updates to work with Windows 7. Maybe it's the issue.

  Please answer these questions:

  1. What is the brand and model of the router?
  2. If it works much earlier?
  3. Any changes made to the computer before the show?
  4. What is the exact error message received when you try to connect to the router?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Setting up a wireless router
  http://resource.Dlink.com/connect/setting-up-wireless-router/

  Post back with the State of the question.

• The wireless router access denied

  Simple question, I'm sure.

  Router / access wireless, everything works perfectly. I can't just now to manage the device.

  Can Ping but cannot access the GUI front-end server to administer.

  Any Pc / computer laptop XP, Win7, Win8 returns:...

  This page cannot be displayed
  • Make sure that the web address https://192.168.0.1 is correct.
  • Navigate to the page with your search engine.
  • Refresh the page in a few minutes.
  • Make sure that the SSL and TLS protocols are enabled. Go to tools > Internet Options > advanced > settings > Security

  Have checked this and'm sure that's not the issue.

  Hi Gavin,

  1. you are trying to access router webpage wired or wireless?
  2. What is the brand and model of the router?

  I suggest you try the steps from the following link:

  Set up a wireless router (the router setting)

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  Note: You can try to access the Web page of the router by connecting the wired router. If you still can not access the router's Web page, then you can do a hard reset of the router by taking a small pin and do hard reset. When you hard reset you will lose all the settings of the router and you will need to re - configure the router.

  If you are not aware of the configuration of the router, then I suggest you to contact the manufacturer of your router.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Wireless router local only: Vista

  Hello, I use Windows Vista on my laptop which has the feature integrated wireless. Today, I tried to set up a wireless router to my laptop so I can connect to the internet. I have been using a modem for the past 2 years (Motorola, model SB5101i) and are connected to the internet just fine. However, my router is detectd by my laptop but has local access only. I can't connect to the internet and I don't know why. The model of my Linksys WAG354G router isn't. I tried to plug in an Ethernet cable to my router and the laptop, but nothing helped. I also ran ipconfig in cmd and this is what I got:

  Link-local IPv6 Address...: fe80::2047:93e8:e09:611 has 13%
  IPv4 address...: 192.168.1.64
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::e876:711 has: 563 a: aaad % 12
  IPv4 address...: 59.189.234.244
  ... Subnet mask: 255.255.252.0.
  ... Default gateway. : 59.189.232.1.

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : domain_not_set.invalid

  Card tunnel Local Area Connection * 13:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:cf2e:3096:20fd:11f8:c442:150 b
  Link-local IPv6 Address...: fe80::20fd:11f8:c442:150 b % 14
  ... Default gateway. :

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 15:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 16:

  The connection-specific DNS suffix. :
  IPv6 address: 2002:3bbd:eaf4:3bbd:eaf4
  ... Default gateway. : 2002:c058:6301:c058:6301

  I don't know what I can do to remedy the situation. Hopefully I can help. Thanks in advance!

  Seem as if your router and modem do not communicate.  You mya need to reset your Motorola modem is back sink with your router.  First thing you can do is to go to the command prompt and do an ipconfig/release.  Then turn off your computer.  Once your computer is off, turn off your Motorola modem for at least 2 minutes.  Turn on the modem and the computer.  This should run your modem and router.

  Us how it goes.