NAT of the hub event logging
I try to turn on logging for NAT on my hub (v4.7.2k 3030). I connect several classes already. I've looked through each of the classes of events, but nothing seems to be for NAT.
Ideas?
Have you tried adding IP and IPDBG in:
Configuration > system > events > Classes.
NAT must be connected after you enable that. You can increase: the recording level to the greatest test.
Concerning
Farrukh
Tags: Cisco Security
Similar Questions
-
Ideas:
- You have problems with programs
- ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi sanjeevkode,
Thank you for visiting the website of Microsoft Windows Vista Community. As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.
VMware communities: http://communities.vmware.com/home.jspa
In the meantime I suggest you try these options / methods
IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.
Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start
Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID
Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you
Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.
The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.
Let me know if it worked.
Hope it will be useful.Thank you and best regards,
Vijay K - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Hello
I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.
A few days ago I could open all what programs. I put t know what is the problem.
I did sxstrace and that's what I have-
=================
Launch the activation context generation.
Input parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-US; en
ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
Application configuration file =
-----------------
INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
INFO: Manifest definition identity is (null).
INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for the neutral culture.
INFO: Application binding policy.
INFO: No found publisher policy.
INFO: No redirect political connection is found.
INFO: Start the detection of assembly.
INFO: Can't find the assembly in WinSxS.
NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
INFO: Found no manifesto for the neutral culture.
INFO: End detection of assembly.
INFO: Resolving reference for ProcessorArchitecture x 86.
INFO: Resolving reference for the neutral culture.
INFO: Application binding policy.
NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
INFO: Start the detection of assembly.
INFO: End detection of assembly.
ERROR: Activation context generation failed.
End activation context generation.Help, please!
This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.
Follow the steps below:
Method 1:
If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.
(a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.
(c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.
Step 2
If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.
In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
Package redistributable Visual C++ 2005 (X 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
Visual C++ 2005 (x 64) redistributable package manager
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=enPackage redistributable Microsoft Visual C++ 2008 (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en
Package redistributable Visual C++ 2008 SP1 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=enI hope this helps.
-
I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:
"Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details"
-how can I solve this problem? I have Windows 7.Hello
Thanks for choosing Microsoft Community to post your question.
It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.
We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).
Here are a few troubleshooting steps that you can try to solve this problem.
Method 1: we will install Microsoft Visual C++ for your computer package.
Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).
If you use the 64-bit operating system, download and install edition(X64) 64-bit.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=enMicrosoft Visual C++ 2008 SP1 Redistributable Package (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=enPackage redistributable Microsoft Visual C++ 2010 (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84
Package redistributable Microsoft Visual C++ 2010 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867
Method 2: Run the fixit available at the following link.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Also, check the event log using Event Viewer.
Please see the link below for more information on how to use Event Viewer to check the error message or information,
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
If you have additional problems, please reply to this post and we will be happy to help you further.
-
Next message on the screen for IP address conflict. There are two addresses. How to solve this problem. Message to say go to the system event log window. I can't. Pl help.
A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts. When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer. When the computer asleep wakes duplicate error will be triggered. It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses. If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message
-
«WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»
This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.
I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.
I don't know what to do.
Hello
You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
Method 1:However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 2:You try to run the fixit given in the following link and check if it works:Method 3:You have recently updated with Microsoft Visual C++?I hope this helps! -
How to create a rule of action to subtract from the Ips event log manager console express?
How to create a rule of action to subtract from the Ips event log manager express console?, some unknown has a guide?
Thank you.
Sent by Cisco Support technique iPad App
Hello
http://www.Cisco.com/en/us/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml
HTH
Luis Silva
"If you need IDP (planning, design, implementation) assistance do not hesitate to contact us.
-
Treatment of the Windows event log
Log Insight is able to ingest a Windows Server logs in the Windows event log format? Or do I have the event logs Windows can be converted to syslog so that Insight Log to treat them?
Thank you!
Or - the Windows Event Viewer is not really a format - it's more of a database. LI ingests events event viewer, but it does not convert in syslog. The result is similar to what you see on WIndows - see attachment.
-
Security-SPP in the Application event log
Hello
Since we installed the Agent Mirage to the Windows application log is filled with entries 'Security-SPP.I stopped the Service of Mirage and the flooding event log stopped also.
Any ideas why this happens? Or someone at - it same problem?
Thanks for your help.
Cordially SébastienHi Sebastian,.
The client of Mirage periodically polls WMI for Windows license information.
This WMI query triggers an event log message. Because the Mirage makes this request every X minutes, you have more of these events in the event log.
However, this event log is a log of the information only events. Although it appears several times, it indicates no problem with your machine.
We already have an open problem on this in our backlog for fixing this behavior, I hope that this correction will be introduced in future releases.
Kind regards
Tal
-
Disable the use of the Windows event log
Hello everyone. Thank you in advance for help.
Is there a way to disable the Oracle of Scripture in the Windows event log? Or at the very least, ignore errors resulting from Oracle not be able to write to them?
-Arik
In windows when AUDIT_TRAIL = OS, verification of documents are written in the same newspaper. Changing this setting to DB if you want to not audit records to be written to the event viewer. Also no matter what your SYSTEM operations will be written to the event log even if your audit_trail is set to DB. You can disable auditing of sys setting AUDIT_SYS_OPERATIONS = false
-
Re: How to remove periodically the huge Events.log in $APPLCSF / $APPLLOG
Hello
How to remove periodically the huge Events.log in $APPLCSF / $APPLLOG
11.5.10.2 on IBM AIX on POWER Systems (64-bit)
Kind regards.Please see this thread, it should answer your question - Events.log file in $APPLCSF / $APPLLOG location
Thank you
Hussein -
The cdrom will not close completely and it won't open when I push the Open button. When I manually open with a paper clip then close again he still doesn't close completely and it restarts the computer in "safe" mode In the same newspaper, it has the following:
Log name: System
Source: cdrom
Date: 20/03/2011-16:18:10
Event ID: 7
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: Jeff-PC
Description:
The device, \Device\CdRom0, has a bad block.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
7
2
0
0 x 80000000000000
169760
System
Jeff-PC
\Device\CdRom0
0F0080000100000000000000070004C0000100009C0000C000000000000000000070EB1C000000006378060000000000FFFFFFFF01000000580000C40201000000200A12480200400010000004010000000000000000000048CC860580FAFFFF0000000000000000407B930580FAFFFF806BAC0580FAFFFF6E9D030000000000280000039D6E00000200000000000000700003000000000A00000000110500000000000000000000
I'd appreciate any help you could provide. Thanks in advance.
Hello
Looks like the CD-ROM drive is a failure. Uninstall and reinstall the disc and check if this solves the problem. If the problem persists, you should replace the disk.
To uninstall the drive from Device Manager:
a. Click Start, then type devmgmt.msc in the start search box then press ENTER.
b. right-click on the CD and click on uninstall.
c. restart the computer. -
How to write to the system event log
Windows 7 Home Premium 64-bit Service Pack 1
I run a daily work to create an image of my drive system hard. Repeatedly the work began and, due to a material error, be abandoned. In some cases (mostly), this will result in the image of yesterday being destroyed, leaving me with no viable image in case I need to restore. Although the reader is old enough (3 years), I'm not want to replace it, because I know no other activity that has had a problem with it and diagnoses reported no problem.
So I want to execute a batch file or a script before the regular daily system backup operation. The script would go to a SMART short self-test, and if no errors are reported, would signal the backup task to run. Conversely, if the self-test report any error, the script don't trigger not the backup task to run. I think I will need to write an entry in a kind of system event log, which would be defined in the trigger condition in the entrance to the Windows Task Scheduler for the backup task. If anyone can help with the details of how to write an entry to a log of system events?
Or, perhaps, there is better way to achieve what I want to do?
I guess that there is not a very high probability that the script will always truly detect a problem and prevent the last image of the destruction. But I tell myself that it is worth the effort.
TIA
Assuming that smartctl generates an errorlevel nonzero in case it failed, the following script will work, as long as Smartctl is run under the same account as Casper.
I also made your script more transparent control setting. The if/then/else/if/then embedded instructions are perfect for computers, but are often misconstructed by the human mind. I'm a big believer in the KISS principle.
OFF @echo
FOR %%d Ko (% Date %) Today SET = %% ASET now = time %
echo =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
ECHO% now %%d now %%d %2
echo"=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
Si (« %3 « == » »
echo of the provided insufficient parameters
output/b 1
)IF/i %1 is goto short Action
IF/i %1 is goto long Action
ECHO 1 Parm [%1] is INVALID
output/b 1: Action
smartctl t %1 %2
the echo of SECONDS to WAIT for selftest %3
choice/n/t %3/d N
smartctl-l selftest %2%Set Flag="%temp%\Smartctl.log".
If exist % del % % flag flag
If %ERRORLEVEL% is 0 echo. > Flag %For the handshake to work, you must place the CASPER command inside a file of commands as follows:
off @echo
If exist c:\Casper\Casper.exe '% temp%\Smartctl.log '.
-
WHEA-Logger 17 error in the system event log
I would like clarification on the specific error that is listed in my system with high frequency event log; I don't know if it is a hardware or software problem.
My system specs are:
Windows 7 64 bit
Motherboard ASRock X 58 extreme LGA 1366 Intel X 58 ATX Intel
SAPPHIRE Vapor - X 100269-2GVXL Radeon HD 4890 2 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready CrossFire
Western Digital Caviar Black WD1001FALS 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "internal hard drives
PLEXTOR 24 X DVD/CD Writer black SATA model PX-880SA LightScribe Support
Crucial 6 GB (3 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Triple Channel Desktop memory Kit
Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920I've updated the BIOS with the latest version, 1.40, and have the latest Intel Chipset drivers.
Measures to take for troubleshooting:(1) uninstalled and reinstalled drivers Chipset Intel
(2) uninstalled and reinstalled the ATI drivers
(3) Ran Memtest and can't find any errors
(4) update BIOS
(5) reinstall the ATI video card
(6) uninstalled and reinstalled 0 x 8086: 0x340a in Device Manager
(7) searched the forums and cannot find a solution.Description:
A corrected hardware error occurred.Component: PCI Express Root Port
Source of the error: Advanced Error Reporting (PCI Express)Bus: Device: function: 0 x 0:3:0 x 0 x 0
Vendor ID: Device ID: 0 x 8086: 0x340a
Class code: 0 x 30400Any suggestions as to the cause of the warning and the solution would be greatly appreciated.
I think that you should make no decision until after 22nt Oct. No one wants to "Miss the bus." Your hardware manufacturer will attempt to get on the same page.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
How to export the vCLI event logs?
Hi all
I need your help.
I would like to know how I can export the log of events by vCLI.
and if it is possible, what the command is can.
the purpose of it, we want to make a script to the export of logs automatically.
We have same operation on vSphere Client, as a result of steps.
Home-> events-> Export events
Here's my environment.
vCLI 5.0
vCenter Server Version 5.0.0
5.0 ESXi hosts
* Power CLI is not installed.
Thank you in advance.
Kaori
Hello
As much as I KNOW, export event logs can not be done using vCLI.
It can be done by using the vSphere client as you commented or powercli.
Best regards
Pablo
Maybe you are looking for
-
How to remove a device lost from iTunes?
We lost an android phone on my iTunes account. He counts against our limit. How do remove us it?
-
Is it possible to copy a message thread in its entirety from one of my contacts from my phone and send it to my laptop
-
Finder - content issue not presented
I had a problem with the finder long even with the Mavericks and now with v10.11.1 El Capitan I don't know what's happening that this occurs, but I am sure it starts happening after a while that my Mac is started (I restart not often, but every time
-
Updated cumulative cumulative-help please
Hello everyone; I need LATEST update cumulative rollup for Windows Vista SP2. Microsoft only please related links. Thanks in advance. Marek
-
Archivos y carpetas no appears is the bar of direcciones is pone verde y los archivos y carpetas don't solo appears al write the address, Ubicación o .tngo windows 7 ultimate number.