NationalInstruments. version of the common dll 22.214.171.124
I'm using Visual Studio 2010, and I try to access ports digial on my NI USB-6210.
below I have c# code. Try to access the data acquisition. It's simple, but I can't use any device OR because of the dll I have.
I have the 126.96.36.199 version that I think that it works with previous versions for capatibility backward.
When I Isaiah to compile the program, it gives me this error.
Error 2 the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 188.8.131.52, Culture = neutral, PublicKeyToken = 18cbae0f9955702a "."
I don't know if I need a dll different reference or if there is something wrong with the dll.
(Task TRD = new Task()) //Task TRD = new Task();
find the right port and use the first value by default. DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.DIPort, PhysicalChannelAccess.External) ;
DRT. () DIChannels.CreateChannel
DigitalSingleChannelReader reader = new DigitalSingleChannelReader (TDD. Stream);
int = reader data. ReadSingleSamplePortInt32();
Looks like you need to add a reference to the DAQmx driver. Here is another forum that deals with this. http://forums.NI.com/T5/Multifunction-DAQ/DAQmx-API-Reference-Visual-Studio-2010-Windows-7/TD-p/1408...
Tags: NI Hardware
I need to use the API of NET c# in a java program, so I tried to use Jni4net library to fill the dll in Java. I get errors however, because the version of daqmx.dll that I have been built against CLR 2.0.50727. Is there a version of the dll for CLR 4.0 (corresponding to .NET 4.0 or higher)?
If someone know another way to call the java daqmx.dll?
I eventually found the version I had to work.
I have the DAQmx.dll assembly. I got an old software project developed for the device, I'm working on that. I guess that the original developer obtained from the disk of National Instruments.
I installed a media player from a third party, and when I uninstalled it, I clicked YES to delete all files attached to it. After that, I am unable to open all the files or upload files to try to solve the problem. Can anyone help?Thank you
You can try to uninstall and reinstall Windows Media Player and see if it helps. See the following links for the same thing.
I am looking for a place to get a debug version of the oleaut32.dll file to disable caching for BSTR allocations.Advise please, where I can find a. I have Win7 and WinXP
Because the problem is related to the type BSTR I suggest you to post the question on the MSDN forums for assistance.
I hope this helps!
I have a small number of Windows 7 x 64 workstations that will not apply the KB3035126 patch, but they always show as having older versions of the WMIPhoto.dll file. This would mean that they still have vulnerabilities that are specified in the article, correct?
WMIPhoto.dll version on my computer which does not apply the update:
WMIPhoto.dll version after you apply the hotfix in KB article:
File version size file name Date time file platform
C:\windows\system32\wmphoto.dll 6.1.7601.18742 392 192 4 February 2015 03:16 x 64
C:\windows\system32\wmphoto.dll 6.1.7601.22949 392 192 4 February 2015 03:46 x 64
C:\windows\system32\wmphoto.dll 6.2.9200.17254 465 920 4 February 2015 03:16 x 64
C:\windows\system32\wmphoto.dll 6.2.9200.21371 465 920 4 February 2015 03:46 x 64
I'm deploy the patch with Configuration Manager 2012 and it came out to the majority of customers successfully. Configuration Manager does not show the other guests as requiring even the patch, so I think its not required, but the associated dll files show always as old.
I looked for any other reports of this issue, but nothing comes back. For any idea or suggestion is appreciated.
Thank you for visiting Microsoft Community.I suggest you to post your query on our TechNet Forums social as this question right here.
Please refer to the reference to the link below to send your request:
Hope this information helps.
I'm having a problem with some files open in Photoshop. I use Photoshop CS5.1 Extended (Version 12.1) and you have Windows 7 64 bit SP1 OS.
I'm opening a few models that I made in PhotoShop for a client and it worked fine when I used them 3 weeks ago. All were saved as .psd documents. Now when I go to open them they do have the PS icon (to show that they would be open by PhotoShop). When I try to open them I get "Could not complete your request because it is not the right kind of document." I had this problem once before, but it's confusing to me 2 other .psd similar files that I recorded in the same period (separate for the temlate elements) are perfectly fine, those I need won't open.
I checked the properties of the file, and he claims that these files are now the Windows Shell common Dll files. Any ideas?
Among the file names, it looks like windows is confused about the type of file due to the periods in file names.
If in photoshop, you go to file > open as > PSD, open files in photoshop?
You name the Windows/system32 directory, such int files: shlwapi (4) (2) .dll? I have a lot of files in system32 that look like this often 3 or versions of the same file?
You name files in the Windows/system32 directory, such: shlwapi (4) (2) .dll? I have a lot of files in system32 that look like this often 3 or more versions of the same file?
1. you are trying to move files in and out of Windows\System32?
By default, windows has not usually (4) or (2) and if there are several files that it can be indicative of a program to move files if you do not have them.
I have not a good idea on what operating system the target for my application. Someone here could give me an idea of what are the most used OS versions out there. How the distribution of people works 4.2 4.3 or something older or newer. I was hoping to have the minimum version of the 4.3, but if this isn't common enough I would rethink my approach
If you look at this thread,
you will see Mike Kirkup rim suggests that 75% of all devices are 4.2 or the latter.
Personally, I would point the Pearl and 8800 devices, which were initially 4.2 and 4.2.1 devices respectively.
Hello! I changed my str file to cmd.exe how to return to the Windows Shell common Dll?
System Restore lets you go until you changed it:
The Windows Shell common DLL has stopped working...
I have a gamepad havit HV G82 try to run win 8When I go to control panel > devices and printers > game controller settings > properties
In properties each time I click on Vibration Test tab, I get this error "The Shell common Dll Windows has stopped working"
When I play games also buttons map correctly
Any help is very appreciated
Have you managed to solve the problem by using another approach?
You can contact the manufacturer of the device to check what they have to say on this issue.
Original title - Windows Shell common Dll has stopped working...
I have a Frontech JIL 1731 gamepadWhen I go to control panel > devices and printers > Generic USB Joystick (Game Controller Settings) > propertiesIn the properties... Whenever I click on Test of Vibration tab... I get this error (link to image): http://img341.imageshack.us/img341/8023/capture1hce.pngPlease help me with this error and more I can not play with vibration... means I can use the controller to play games, but there is no vibration...:(j'ai aussi tourner sur la vibration dans le jeu...:/)Help, pleaseThanks in advanceMy assembled computer specs are-Motherboard ASUS M5A88-MAMD FX-6100 (3.30 GHz, 8 MB L3 Cache)AMD Radeon HD 5450 1 GB8 GB RAMWindows 8 Pro x64bit
you are awesome... I have beeen trying several solutions to the problem of vibration, but your technique works like a charm
Get the following error:
"The Assembly 'NationalInstruments.DAQmx, Version = 184.108.40.206, Culture = neutral, PublicKeyToken = 4febd62461bf11a4' use ' NationalInstruments.Common, Version = 220.127.116.11, Culture = neutral, PublicKeyToken = dc6ad606294fc298' that has a newer version than the referenced assembly ' NationalInstruments.Common, Version = 18.104.22.168, Culture = neutral, PublicKeyToken = dc6ad606294fc298"
NEITHER 14.1; MeasurementStudio2013; VisualStudio2012; Windows 8.1
Could check you if 22.214.171.124 version (or higher) of NationalInstruments.Common.dll is present on your system (IE in the GAC .NET folder and the folder of measurement Studio 2010).
File GAC .NET: C:\Windows\Microsoft.NET\assembly\GAC_MSIL
Measurement Studio 2010 folder: C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2010\DotNET\Assemblies (on a 64-bit machine)
If so, please remove the NationalInstruments.Common.dll in your Visual Studio 2012 project and add the reference to the reference NationalInstruments.Common.dll by using the dialog box add a reference in Visual Studio 2012 in your project. Make sure that the reference to NationalInstruments.Common.dll in your Visual Studio 2012 project is 126.96.36.199 or higher.
I tried to update my iTunes this weekend. Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer. I tried to re - install outside of iTunes and repair. But no luck. Should I uninstall iTune and then re-install? Help.
These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in
- C:\Program Files\Fichiers Files\Apple\Apple Application Support or
- C:\Program Files (x 86) \Common Files\Apple\Apple Application Support
where the name of the Program Files folder may vary depending on the region.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
I develop c# code to interface directly with my Renault NI. There are some examples of excellent for .NET code with DAQmx drivers; for example, AcqOneVoltageSample.2005.
Unfortunately, I have recently updated my DAQmx, which updated the Assembly of NationalInstruments.Common of 188.8.131.526 to 184.108.40.206. It is not surprising, when I try to open any project example .NET, as the AcqOneVoltageSample.2005, a dialog box with the logo of National Instruments appears entitled "update project references" and asking me to check that I update the referenced version of NationalInstruments.Common from 220.127.116.116 to 18.104.22.168. I say 'Yes' and check that the assembly is referenced in the solution has indeed been changed to 22.214.171.124.
But now, the solution will not compile. Specifically, the compiler (Visual Studio 2008, compilation under NET2.0) get two errors:
(1) the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add NationalInstruments.Common version 126.96.36.1996
(2) the type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add (same as above).
Both errors refer to the code that instantiates the DAQmx.Task object, even if it is defined in the common version 8.6.
I checked that new version 8.6 the common is properly referenced. When I remove that reference and add the older version 8.1 it compiles properly. I tried to rebuild the solution, delete the .bin and .obj directories and reconstruction, by checking the option "local copy" when you reference version 8.6... nothing works. I don't see anything special in the assembly.cs. I can compile using the last Assembly NationalInstruments.DAQmx 188.8.131.52, just not the new NationalInstruments.Common Assembly.
How can I get the sample files .NET for Visual Studio 2005 to compile with the new versions of NationalInstruments.Common against the. NET2.0 library?
You reinstall the DAQmx Driver after the installation of Measurement Studio? You will need to reinstall the drive and make sure that you choose to install support for Measurement Studio.
just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed on the computer?
Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.
By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.
Follow the methods below
To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:
Step 1: Remove Windows Desktop Search from the boot sequence
To do this, follow the steps below:
a. click on the start menu, click Run.
(b) in the Open box, type msconfig and press ENTER.
c. in the System Configuration Utility dialog box, click the Startup tab.
d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.
e. restart your computer.
Step 2: Uninstall Windows Desktop Search applications
To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:
a. click the start menu and select Control Panel utility.
b. double-click the icon Add / Remove programs.
c. in the Add / Remove Programs, locate and select the Windows Desktop Search.
d. press the button Delete.
e. restart your computer.
Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
Maybe you are looking for
Hello everyone, I get a Toshiba - 10J Portege R500, with the QWERTY keyboard.I want to change it with the QWERTY keyboard, because I usually use the French. But I don't know on the net the explanation or detail to achieve this.Someone get some photos
Hello Can someone please help with this problem. IAM cannot use my camera and light buttons. camera: error message, you do not have the compatible vga hardware or driver to run you cam touch of brightness: brightness buttons does not I tried to unins
I use a time machine / capsule (latest generation) to my wifi. Just purchased a Lorex security for my home that needs to be connected to the internet (via ethernet). Can I plug the ethernet cable into my time machine without affecting my WIFI? Or I n
I'm just curious to know if there is an advantage to send a picture to someone in an SMS or e-mail. If I'm on wifi, then he uses all the data to send, right? If I use the wifi, a text message still uses data to send it?
Hello Just a practical question, but I would need very often this kind of functionality: How can I copy - paste an object of front panel to the same location? Lets consider the I have a TAB container, and on the first page, I have a chart. I would li