Similar Questions

• Storage DELL OMSA [Windows Server 2003 R2 64-bit] not shown [14/10/2014]

  Hi all

  I have a general question/issue. I install DELL OMSA on a poweredge 1950 using Windows Server 2003 R2 server and the only part not appearing is not in the list system is the storage controller.

  The system carries out the following:

  Dell OpenManage Server Administrator Version 5.3.0

  It shows everything except the storage controller. Please indicate how we can improve this to show the PERC controller/storage for the following:

  WX072
  1
  Assembly, Card (Circuit), Serial Attached SCSI PERC5I, 1950, 2950
  TX846
  1

  THE ASSEMBLY, CABLE, CONTROL, SERIAL ATTACHED SCSI, POWEREDGE EXPANDABLE RAID CONTROLLER NUMBER

  Thanks again as always!

  Kent C.

  Hello Kent,

  The first thing to check is to ensure that all four OMSA services are running. They appear as DSM in services. You can also make a change to the Setup from Add/Remove programs and make sure that the storage options are installed. Alternatively, you can install a newer version of OMSA http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=28KFC&fileId=3365343263&osCode=WX64&productCode=poweredge-1950&languageCode=EN&categoryId=SM

• Reference DELL OMSA 6.5 on Windows server 2012 - instalattion - cdegfc.exe error code = 259 error

  Hello, masters!

  I try to install Dell OMSA 6.5 on Windows Server 2012 x 64 and get the following installation error message: code of error cdegfc.exe = 259
  See figure available at: https://www.dropbox.com/s/ns2x73zjtkz5wig/Error_OMSA-65.PNG
  After the error message, the installation is aborted.
  I use the aministrador account to install.

  Can you help me?

  Thank you

  Diramos

  diramos

  So, I ask your help to solve my problem.

  I provided you with the cause of the error and possible resolutions in my first post. I'm not going to spend a lot of time trying to reproduce a problem and find a solution for something that is not compatible.

  diramos

  I ask you to read my previous post.

  I recommend to read my first post and look at possible causes, that I pointed out. If they do not resolve that problem, then post back with more information.

  I try to help as much as I can with material not picked up and software configurations, but since they almost always require reproducing the middle right to solve is not something that I help out carefully.

  Not supported hardware and software configurations are something that you need to fix yourself or with the help of the community. I'll give you the sense when I can.

  Thank you

• Can't access to Dell OMSA-how fix?

  Installed Firefox 42 on server. Allows access to Dell OMSA with IE. Firefox does not open the link. Internet research said I must go in OME preferences and check the box to allow this feature. Where is the 42 version?
  Thank you.

  Thanks for your help.
  I found an article on the web who told me to change two settings security. Now it's working. I still have to log in with the user name and password, but it's an https connection. Everything I do is close the browser to exit.

• Ubuntu 8.10 + DELL OMSA 5.5.0 - 5 i386.deb + PowerEdge 1750 No. controllers found problem [11/08/2014]

  Hi all

  PROBLEM:

  root@Ubuntu:~# omreport storage controller
  No controller found

  * Please note that the WEBGUI shows everything EXCEPT the PERC *.

  * EVERYTHING ELSE APPEARS ON THE SERVER WHEN I JOURNAL *.

  Loading via CLI:

  restart the /etc/init.d/dataeng

  restart the /etc/init.d/dsm_om_connsvc

  the /etc/init.d/snmpd restart

  I manually installed the DELL OMSA from this LINK:

  FTP://FTP.Sara.nl/pub/Sara-OMSA/dists/Dell/Sara/binary-i386/

  dellomsa_5.5.0 - 5_i386.deb

  TECHNICAL DATA:

  root@Ubuntu:~# uname - a
  Linux ubuntu 2.6.27 - 17-server #1 SMP Thu Mar 12 04:04:33 UTC 2010 i686 GNU/Linux

  root@Ubuntu:~# cat/etc/lsb-release
  DISTRIB_ID = Ubuntu
  DISTRIB_RELEASE = 8.10
  DISTRIB_CODENAME = bold
  DISTRIB_DESCRIPTION = "Ubuntu 8.10.

  * - storage
  Description: bus RAID controller
  product: PowerEdge Expandable RAID controller 4/Di
  Seller: Dell
  physical ID: 3
  Infobus: pci@0000:04:03.0
  logical name: scsi2
  version: 02
  Width: 32 bits
  Clock: 66 MHz
  capacity: storage pm bus_master cap_list pcix msi
  configuration: driver = megaraid latency = 32 mingnt = 128 megaraid_mbox = module

  * - drive
  Description: SCSI disk
  product: LD 0 RAID5 279 G
  Seller: MegaRAID
  physical ID: 2.0.0
  Infobus: scsi@2:2.0.0
  logical name: / dev/sda
  version: 412W
  size: 273GiB (293GB)
  capacity: partitioned partitioned: back
  configuration: ansiversion = signature 2 = f362db24

  root@Ubuntu:~# lspci | grep-i raid
  04:03.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4/Di (rev 02)

  PERFORMED TROUBLESHOOTING:

  root@Ubuntu:~# omreport storage controller
  No controller found

  root@Ubuntu:~# lsmod | grep-i ipmi
  2 15112 ipmi_devintf
  1 46252 ipmi_si
  ipmi_msghandler 42712 2 ipmi_devintf, ipmi_si
  root@Ubuntu:~# lsmod-i mpt
  Use: lsmod
  root@Ubuntu:~# lsmod | grep-i mpt
  mptctl 35972 0
  86756 1 mptctl mptbase
  155468 6 mptctl scsi_mod, sd_mod, sr_mod, sg, megaraid_mbox, libata
  root@Ubuntu:~# modprobe mptctl
  root@Ubuntu:~# echo $?
  0
  root@Ubuntu:~# modprobe mptbase
  root@Ubuntu:~# modprobe scsi_mod

  root@Ubuntu:~# dmesg | grep-i mpt
  [12313.810414] base of MPT fusion driver 3.04.07
  [12313.816546] device (ioctl) misc 3.04.07 MPT fusion driver
  mptctl [12313.816741]: registered with the base Fusion MPT driver
  mptctl [12313.816748]: / dev/mptctl @ (major, minor = 10, 220)

  QUESTION:

  
  Does anyone know how to set up the remaining part of the DELL OMSA so PERC appears in the GU or OMREPORT?

  Also, I want to update the FIRMWARE, it'll be ok [I can load Windows XP Mini to run this task]

  FW UPDATE: http://alturl.com/nnob8

  Thank you

  -Hiphoptech

  Are just want to monitor the Raid or you try to do something else? You can try software raid lsi and see if it works. http://www.LSI.com/support/pages/download-results.aspx?component=storage+component&productfamily=legacy+RAID+controllers&ProductCode=P00278&assettype=0&ProductName=MegaRAID+SCSI+320-4x+ (531)

  Or this http://sourceforge.net/projects/megactl tool

  With it is not a validated OS, it is not possible so that it can work properly.

• Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

  Hello

  I am trying to install the DELL OMSA on my Dell Poweredge 1950 with no luck setting the GUI part on the server, so I can use the link "https://localhost:1311" in all of our business network.

  The problem is that I've done the following to at least be able to use the CLI portion only:

  http://www.md3v.com/install-Dell-OpenManage-on-CentOS-6-4

  It is a very useful script that I found online to allow at least the installation works fine. I can't access the web interface, it continues to tell me Elinks or any external browser "unable to access".

  I also have openssl installed with wget and perl. I don't know what keeps me to get the portion of browser to work. Please help!

  Here are the currently used version of CentOS kernel:

  CentOS 2.6.32 - 358.el6.x86_64

  Thank you.

  Hello

  What version of OMSA are you using? Sometimes the older versions work better on the older hardware. What does
  

  srvadmin-services.sh status
  

  show? You may also want to try adding a non-root user to /opt/dell/srvadmin/etc/omarolemap
  

• CentOS 6.4 DELL OMSA error - PE 1950

  Hi all

  I managed to install the DELL OMSA on CentOS 6.4 [64 bit] on a Poweredge 1950 server without too much problem.

  PROBLEM:

  After installation, I have the following problem/error watch and need help where in the file 'invc ol' the following shall be published or how to solve the following...

  / opt/Dell/srvadmin/sbin/invcol:. / invcol: /lib/ld-linux.so.2: bad ELF interpreter: no such file or directory

  Your comments would be appreciated!

  Thank you

  -Hiphoptech

  Hi Hiphoptech,
  Try to install the binary 32 bits of libstdc ++ and zlib
  yum install compat-libstdc ++-33 - 3.2.3 - 69.el6.i686 zlib.i686

• How to install Dell OMSA on a free host VMware or VMware vSphere Hypervisor comments?

  We are virtualizing our 2012 R2 Windows Server and you have a Dell PowerEdge T310 server. We have installed vSphere hypervisor free version 5.5 on the physical server.

  Does anyone know how to install the Dell OMSA? I heard that it will not work if it is installed on the Windows Server R2 2012 host because of the virtualization layer.

  I read a few posts on how it's done, but I can't always get my head around it. I think I've also seen people install a VIB on the hypervisor vSphere itself?

  Can you please describe the General steps or point me in the right direction on how to run the OMSA? The Dell PowerEdge server has a RAID, and we must use OMSA to see a RAID controller unexpected sense errors if they are generated. We used to have a problem with consistency RAID and have had to start again before.

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Hello

  There are a lot of articles and posts on how to install OMSA under VMware. If you encounter problems then please post an explanation of what you are having problems with. Here's a post I did on the subject. It has a link to a youtube video that includes step by step instructions:

  http://community.Spiceworks.com/topic/403141-Dell-open-mange-in-VMware

  jeff0000

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Integration of OpenManage for VCenter requires always the OMSA agent must be installed on the hypervisor. Correct, it is not a free version of VCenter. No installation procedure who advises using VUM or VCenter should be ignored because you will not have access to these utilities.

  Thank you

• replace the SSL certificate in Dell OMSA 7.2

  My University is compels me to replace the Dell's SSL certificate in OMSA with a certificate from a certification authority.  We use InCommon.

  I generated a certificate using Microsoft IIS request.  InCommon generated the certificate and got sent back links to a variety of formats.

   as PKCS#7 Base64 encoded:
      Other available formats:
         as PKCS#7 Bin encoded:
         as X509, Base64 encoded:
         as X509 Certificate only, Base64 encoded:
         as X509 Intermediates/root only, Base64 encoded:
         as X509 Intermediates/root only Reverse, Base64 encoded
  
  Does anyone know what kind of certificate I need, and exactly how to install it in the apache server that runs Dell OMSA.
  

  Ok.  I have an answer.

  As far as I know, the interface Dell OMSA itself does not have to import the intermediate certificates (returns an error) and cannot be used to create a useful CSR (signature request) because you can't specify your own institutional settings. Our CA would not authenticate the CSR request generated by the Dell OMSA interface, even if it would incorporate new certificates (which she seems to fail at the).

  The simplest approach is to generate a CSR in Windows IIS, the authenticated certificate back from your CA, and then to export to a .pfx file (private, final, intermediate entity certificate and certificates root key, extended attributes).

  Use IBM tool called keyman (download www.ibm.com/developerworks).  Use the version of Windows.

  It can convert a .pfx file in a keystore apache in 3 easy steps.  1. create a new key file

  2 import the .pfx file 3. Save the key file.

  Tips on the internet suggest keeping all the passwords the same - pfx export, keystore, key, etc.

  Edit the server.xml file in the apache server to use your new password.

  Only downside is that your password will be readable text in the server.xml file.  In the original file server.xml file Dell used system tools or java to hide passwords.

• Manually restart the Dell OMSA ESX agents

  Hello

  Recently, I installed a server Dell OpenManage Essentials to monitor my ESX 5.0U1 hosts. I installed the VIB 7.1 via the Update Manager and everything was fine. I could detect and identify the hosts to OME and troubleshooting tool I could connect via WSMAN and retrieve all the details of the server. I also had the successfully servers send traps snmp on the server of the OME.

  I didn't watch it all for a few weeks but noticed this morning that the OME server could no longer see any servers ESX and WSMAN wouldn't connect.  I want to restart the services/agents of dell on the ESX host computers without restarting the computer, but do not know the CLI commands. Could someone please.

  THX

  I was on the phone with Dell's VMWare support last night for just this question.

  Here restarts all the services management and worked for us.

  We do not MOE, but OMSA on connections to remote VMWare host management is no longer accepted.  The following fixed it without a reboot of the host.

  restart the /sbin/services.sh

• I received a phone call from a tech company (they said they serve Dell)

  I received a phone call from a tech company (they said they serve Dell) indicating they might say to monitor my computer someone (South Africa) shares my computer.  Is this possible?  Dell said that they do not call for clients and found that all the latest downloads on my PC.

  Wednesday, March 25, 2015 18:25:24 + 0000, Frantastic_70s wrote:

  I received a phone call from a tech company (they said they serve Dell) indicating they might say to monitor my computer someone (South Africa) shares my computer.  Is this possible?  Dell said that they do not call for clients and found that all the latest downloads on my PC.

  Almost certainly, it was a scam and with various names and phone
  numbers, one that has become very common these days. See
  http://www.troyhunt.com/2012/08/virus-scams-social-engineering-victims.html
  and
  http://www.howtogeek.com/176605/tell-your-relatives-no-Microsoft-wont-call-you-about-your-computer/
  and
  http://www.howtogeek.com/180514/the-%E2%80%9ctech-support%E2%80%9D-scammers-called-Htg-so-we-had-fun-with-them/

  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, who knows what they were doing or where
  What confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.

  2. after reinstallation of Windows, change all your passwords.
  especially the banks or other
  financial sites.

  Since they have perhaps installed a recorder of strikes, changing just your
  Passwords may not be good enough.

• SERV DELL R220 - initializing iSCSI

  Hello

  I'm going to buy:

  SERV DELL R220, E3-1220v3 (3.1 GHz), 8 GB UDIMM, 2x1To 2.5 7.2 K 6Gbps SATA HD, iDRAC7 Express, PERC H310, 3YProSupport.

  DELL_SVR_R220C, 30230601C_R220

  Is it possible to start MS Win 2012 from the NAS via iSCSI? Is it supported by BIOS a built in network adapteror should I need to buy anything again (another network host adapter forex.)?

  Could move 2x1To hardrives SAR at the end?

  Thanks for any response in this regard.

  FR.

  fthis

  Exceptional! I did a little research, and it seems you are right. It supports boot from SAN. SO, I've put together a document with some instructions. I hope that find you them useful. Thanks for the heads up!

  iSCSI - BootfromSAN.docx

• Request preventivo sostituzione card mother server Dell PowerEdge R610

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al server Dell PowerEdge R610 fuori co Service Tag GGFN25J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Alberto Daponte

  IBN Savio Srl

  Buongiorno, the sto contattando via e-mail.

• alimentatore per SERVER DELL PowerEdge 1800

  Salvo, avrei need disponibilita di prezzo e by:

  -riflettore 01

  SERVER Dell

  PowerEdge 1800 - Codice di matricola: C1HHC1J

  Dati in hoist.

  Speaking saluti

  Buongiorno,

  Unfortunately the party by I server 1800 PE non sono più available by the sale.

  Grazie

  E.C.

• Disco message guasto Server DELL T300

  ROM the sostituzione di un disco di message switch a server Dell T300 fuori co.

  Grazie

  Paolo

  Buongiorno,

  It could fornirmi it service tag del sistema?

  Grazie

  Marco