I do not find any network wireless icon or on the connections of network or the system tray?

Similar Questions

• Volume icon missing from the system tray

  Original title: 'LOST' ICON

  I've lost the 'speaker' icon which is usually at the bottom of my screen that allows me to adjust the volume on my PC.  How can I get the icon back?

  Hello

  Thanks for posting the question on the Microsoft Community.

  I understand that the Volume of the system tray icon is missing. I would certainly help you to fix this problem.

  I suggest to perform the steps of troubleshooting of these links and then see if the Volume icon appears in the system tray.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  How to display the Volume icon in the Notification area in Windows

  I hope this helps you make the Volume icon on the system tray. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• How can I completely stop the LAN icon appear in the system tray >

  I used the function customize icon and click always hide > apply > OK.  It works up until I got disabling my computer.  The next time it is turned on, the LAN icon is back in the system tray.

  Sure Editbabe

  Click lan icon open

  Go to the properties

  the icon tick of the United Nations on space forms when connected

  hope this solves the problem

  Best regards and good luck

  Sohail Khan A professional network hardware

• Printer icon stuck in the system tray.

  I have the printer icon stuck in my system tray.  It will only display when it was actively printing a document.  Now, this is where all the time.  When I switch on it shows 1 document waiting, but when I click on "open all active documents print" it shows nothing.  I stopped and started several times print spooler.  There are no files in % SYSTEMROOT%\system32\spool\Printers. How can I get rid of this icon and the mystery waiting for document? The only printer I have is connected on a network and not directly to this computer.  This computer connects via cable and the computer with the HP printer connects to the same wireless network.

  Great salvation,

  I suggest to remove and reinstall the HP printing software.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need to print a receipt for medical pyt but can not find... printer icon disappeared from the version of thius

  All my other versions of Mozilla, google had the printer that could be increased to see down right, or icon the icon at the top. Now, there is no print icon or the place that says print on the receipt they sent me and tells me to print. I'm old and almost computer illiterate. Help, please!

  If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Open the Customize via "view > toolbars > customize.

  If the element missing printer is located in the toolbar palette then drag this icon in the window customize the Navigation toolbar.

  See also:

  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing
  • http://KB.mozillazine.org/Toolbar_customization

• my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

  I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

  Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  Method 2

  If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• RESOLVED: The Task Manager icon in the system tray

  I always keep my task manager running as an icon in the system tray.  After an update of software that seems to be an update of Windows XP or IE7, I can minimize is no longer my status bar task manager system; the icon is no longer present.  I have not changed the settings view in the Task Manager bar; they are all checked.  Now, I have to keep the Task Manager minimized in the taskbar instead.  [None of the taskbar settings were changed to icons in the system tray as I downloaded the SP3 for XP over 3 years ago.]  Could it have been caused by the update or y at - it a way to get the Task Manager to reduce in the tray system again?  Thank you.

  I tried all types of features troubleshooting before coming here, including a full analysis of the antiviral software from my system & checking event viewer.  I even went in the registry to see if something happened to the system tray.  BUT... The action to be performed by the most obvious and which should have been the first, I failed to do - restart.  Due to an another software update of my antiviral package yesterday, 22/02/2012, I needed to restart.  After the reboot, the Task Manager icon returns to the system tray and minimization has not caused to disappear.

  The only thing I can conclude is that something has gone wrong during the update of the software of MS Windows and installation of KB2660456, KB2647516-IE7, & KB2661637.  It was the only thing that happens so that I was with MS Paint, no browser was opened or other software packages on except what is necessary to update the files over an internet connection.  To take a hit to what it was exactly would be silly because any number of operations might have bothered with or temporarily created a small problem with the properties of the view Task Manager.

  So I chalk it up to did not not the most basic 'Fixer glitch", reboot, in my haste to find a culprit.  I hope that my blunder will remind others not not forget to start with the basics for sudden failures troubleshooting.  Thank you for your time and your advice.

  [I'm sorry; [I broke each problem statement rule with this post by do not detail what I've done, this system that I have, and what software I use and their versions.]

• Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)

  I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.

  I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".

  I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.

  It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?

  Kind regards

  Jason.

  SOLVED

  It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.

  Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.

  Kind regards
  Jason.

• Satellite Pro A40 - Atheros WiFi card can't find any network

  Looking to correspond with anyone who did it successfully this device works. I repeatedly got messages that the system cannot find any network. With my PCMCIA card, wireless works perfectly.

  Advice requested

  Hey Buddy,

  What is your WiFi card listed correctly in the Device Manager? Perhaps only the driver must be reinstalled and then you can use the internal WiFi card again. Here you can download the latest drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  By the way: what OS are you using? If you install OS preinstalled Toshiba using the Toshiba recovery disc are all the drivers already installed, and you should be able to use the internal WiFi card.

• Windows cannot find any networks

  Hi all

  My dsl network connection is not discovered by vista suddenly I have tried all possible means, but to no avail any help would be greatly appreciated!

  the error message says "windows cannot find any network."

  its a DSL connected via a LAN connection

  I think I found the culprit, it turns out be a updated windows defender definition... ive stopped using my network connections now run fine LOL

• error message "windows cannot find any network."

  When I try to connect to my wireless network, I get an error that says "windows cannot find any network". Already called my internet provider and has been sent back to microsoft. I have a netbook at home and he search for connection to the internet, but my desktop running Windows Vista Home prem is this error message. I use microsoft MN500 as my router.

  Hello

  1 are there any changes or updates made on the computer?

  2. were you able to connect to the network before?

  Method 1:

  I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to reset the TCP/IP Protocol and check if it helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 3:

  See the link and check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, (http://support.microsoft.com/kb/322756/) see link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WiFi is not searhing any network

  I am unable to connect wifi.drivers are installed, and yet I suffer. and he does not discover any network.near wireless for me

  If you have a portable computer, make sure that your wireless is turned on.  According to the specific make and model, there may be a physical switch or a combination of keys that you press.  There may also be a light indicating if the wifi is enabled or disabled.

• OfficeJet J4680 not finding my network but found others in the neighborhood.

  I'm unable to install my Officejet J4680 wireless. Although I put five feet from my router it can not find my network.  It can however find network neighbors.  My laptop is connected to the network without problem.  The display at the front of the printer to the network of neighbors but not mine.

  Can someone give me help on what goes wrong?

  Thank you

  We will investigate the printer Wireless:

  1. Press on the <#>and <*>keys together and release them together.
  2. At the same time press the keys '1', '2', '3 '.
  3. Press the right arrow button to scroll through the menu selections until you see "Connectivity Diagnostic Menu" appears.
  4. Press OK twice.

  You should get a diagnostic report on the bottom of the page with a list of networks wireless detected. Tell me if you see your network wireless on the investigation.

• Error when access instrument ' primary error: (Hex 0xBFFA003D) could not find any channel or repeated capacity channels.

  Hi all

  I believe that I have correctly configured max I'm trying to use the PXI-6229 device via. When I try initialized, I get the following error:

  The primary error: (Hex 0xBFFA003D) could not find any channel or repeated capacity channels.

  Clues about what means error?

  Thank you

  Manesh

  First of all, you'll have more help in the appropriate forum.  This seems to be a problem DAQmx and their forum is here: http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250

  Secondly is this help: http://forums.ni.com/t5/Switch-Hardware-and-Software/NI-SwitchExec-with-3499-and-IVIDriver/td-p/1827...

  Finally: You can communicate with the MAX card?  Or is the occurrence of the error in MAX?  What language do you use to talk to the card with?  Using IVI?  If you are using LabVIEW or CVI then open examples of shipping and test them with this card.

  Kind regards