navigateToURL doesn't work in the browser after publish

Similar Questions

• Clicks of the mouse will not work on the browser - suggestions?

  Following an update of Firefox last year, I can't get the mouse clicks to work on the browser. Is not serious if he left or right buttons. Links and radio buttons get highlighted when you move the mouse over the links or buttons, but they do not work when you click on it. They work on other browsers (Explorer and Chrome) but is no longer on Firefox. I use it on a Sony Vaio laptop running Windows 7

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• How to find the total size of the bin file recycled in Windows 7? Using CTRL + A doesn't work in the Organization, layout, click details.

  Using CTRL + A doesn't work in the Organization, layout, click details.

  Open the computer. Right-click on OS: (C) | General tab | Disk Cleanup button. This will give you the size of the trash other areas also. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• Exit button does not work in the browser window - 8 Captivate

  Someone at - he found a way to get the button leave on the 8 Captivate toolbar to work in the browser window?  I saw that he did not work in previous versions of Captivate. Is there a way to operate in 8 Captivate?  Alternatively, Adobe is working on a fix to get the button work?

  Yes, the close X works in 100% of the time. This is because the browser itself is just a window in the operating system. And you're dominating the window to close.

  And you might wonder why this works while the Exit button fails back. And it would be that it is a security issue. Safety prevents the window from closing because if a web site has been bad, he could actually trick you by change and quickly close the window and prevents you from browsing.

  It is easy to disable the button Exit. Just click Project > Skin Editor and erase the close box.

  

  See you soon... Rick

• Hyperlinks to named destinations only works IN the browser?

  We have a document with named destinations and it is hosted on our web server.  On our web page, there are hyperlinks to these named destinations.  They work perfectly to open in IE and Firefox when the browser preferences are set to open a PDF file in the browser (Firefox preview, etc.).  However, if the browser settings open PDFs makes Acrobat (Pro, reader, whatever), then the document opens on the first page and ignores named destinations.

  We are doing something wrong, or the insertion of links to named destinations works within the browser?  Thank you in advance for your help!

  If a PDF file is not open in a browser, then the browser download and (maybe) start Reader with the file name. The named destination was long thrown before the browser startup drive.

• some characters on the keyboard doesn't work don't not after macos sierra installation keys on one side does not not after installing sierra on my mac pro book

  keys on one side does not not after installing sierra on my mac pro book

  Hello dssheorey,

  Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:

  Reset the management system (SCM) controller on your Mac.

  If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  See you soon!

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• NavigateToURL doesn't open in the same window and refresh of infinity

  I have a project that requires a "skip" button and to go to a url specified in the same window once the animation is complete. The button works, however the navigatetourl in the last image does not.

  Here is the code that I placed in the last picture:

  addEventListener (Event.ENTER_FRAME, fl_EnterFrameHandler);

  function fl_EnterFrameHandler(event:Event):void

  {

  Start your custom code

  This code example displays the words "Framework of entry" in the output panel.

  navigateToURL (new URLRequest ("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded_assignments/index.html"), '_self');

  ;

  Stop();

  Complete your custom code

  }

  I tried to move it to a previous setting, placing a stop in the previous framework, displacement of the order after stop and so on. No matter what I do, the new url opens in a new window and is in a constant state of refreshment. I also disabled loop but the animation begins to load the first image again anyway.  Help, please. I tried several fixed listed in the forums which are built around the same with no different results.  You can view my animation here: http://www.student.nvcc.edu/home/amlayne/ite170/flash/graded%20assignments/myintro.html

  NOTE: You must close the browser to get the update to stop.

  I have worked on this issue in two days and I am at a total loss.

  the enterframe event is dispatched repeatedly several times per second (equal to your pace) and this isn't what you want.

  Replace all the code with:

  navigateToURL (new URLRequest ("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded _ * ignments/index.html"), "_self");

  Stop();

• Newbie: QuickPrint button toolbar does not work in the browser

  Hi all

  does anyone know a solution for this:

  -a wrote a javascript that adds a button on toolbar containing the following lines:

  app.addToolButton({)
  cName: "atbToolButton1."
  oIcon: oIcon,.
  cExec: "this.print ({bUI: false, bSilent: true, bShrinkToFit: true});"
  cTooltext: "Print without print settings dialog box."
  NPO: 0,
  cLabel: "QuickPrint".
  });

  -the script is located in the directory drive with the name config.js Javascript

  -It works fine but only in the player

  -When a pdf document is opened in the browser of my good script doesn't seem to work

  -I know that in the browser, it is the activex plug-in

  Is it possible to have this toolbar button in the browser plug-in? And is there another place to copy to the script?

  Help, please.

  Thanks for any help in advance.

  PS: I use the reader version 9.1

  Concerning

  Andreas

  Hi endi70,

  The solution I found playing with toolbars in the reader is as follows:

  1. launch the standalone player and the "QuickPrint" toolbar is here (as mentioned by you after you have copied the 'config.js' in the folder JavaScripts.

  2. drag this "QuickPrint" toolbar to the main application toolbar so that this toolbutton now becomes part of the toolbar main application (see attached screenshot).

  3. now, open a pdf in the browser and the tool button "QuickPrint" will also be there.

  Please note that I tried with Adobe Reader 9.3.2 and IE6

  Thank you
  -Shilpi

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• G780 wireless doesn't work anymore; the networks are but cannot connect

  I have a G780 bought earlier this year. It came with Windows 8, which I still use. Everything was working fine until today. All of a sudden I can't connect to my wireless network (I have a router that can have a 'network of comments' in addition to normal and I can not connect to one of these). I had been fiddling with the settings last night, but everything was working well. I can connect with other devices, so I know that the networks work.

  Networks appear in the list of available networks, but every time I try and connect it just doesn't work. To make sure that I wasn't just typing the wrong passwords I tried to disable all security on one of the networks (so it was a totally open network without password), and the laptop still unable to connect. I tried to reboot the router wireless, by restarting the computer, update the driver for the wireless card, uninstall the drivers and reinstall them, activation and deactivation of the wireless card, by unchecking the option to disable card wireless to save energy and last computer ditch effort that I even did this "Refresh" of Windows 8 option that uninstalls all programs you install and resets the default options. Which included also to uninstall my antivirus program, so I tried to connect without that too. Nothing has made any difference.

  Edited to add that I also downloaded and ran the diagnostic tool on the Lenovo site for my laptop and the version of Windows for wireless network problems and it did not show anything.

  I'd appreciate really no indication as to what to do next. I'm good enough at the end of my mind with this.

  It's the weirdest thing ever. I decided to give it a try once again just for the heck of it and like magic it works all of a sudden. I can now connect to two networks very well. I have nothing after my last try yesterday evening except put the computer into hibernation... I don't know how it works now, but I appreciate the help! I'll create a restore right now, just in case. Thanks for your replies!

• navigateToUrl doesn't work anymore in 0.9.4

  It seems that 'navigateToUrl' no longer works in 0.9.4 Simulator. Is there another way to open the external browser with a url?

  Here is my code (really nice works in 0.9.3 but not in 0.9.4):

  package
  {
      import flash.display.Sprite;
      import flash.events.MouseEvent;
      import flash.net.*;
      import qnx.ui.buttons.LabelButton;
      import qnx.ui.core.Container;
      import qnx.ui.text.TextInput;
  
      /**
       * ...
       * @author Siron
       */
  
      // The following metadata specifies the size and properties of the canvas that
      // this application should occupy on the BlackBerry PlayBook screen.
      [SWF(width="1024", height="600", backgroundColor="#cccccc", frameRate="30")]
  
      public class Main extends Sprite
      {
          private var main:Container;
          private var browse:LabelButton;
          private var url:TextInput;
  
          /**
           * constructor
           */
          public function Main():void
          {
              main = new Container();
  
              // feld für url erstellen
              url = new TextInput();
              url.width = 250;
              url.y = 3;
              url.text = "http://devbar.de";
              main.addChild(url);
  
              // button zum browsen
              browse = new LabelButton();
              browse.setPosition(255, 1);
              browse.label = "Go";
              browse.addEventListener(MouseEvent.CLICK, btUrlClicked);
              main.addChild(browse);
  
              // container auf die stage stellen
              main.setSize(stage.stageWidth, stage.stageHeight);
              addChild(main);
          }
  
          /**
           * zu url browsen, wenn button geklickt wurde
           * @param   event
           */
          private function btUrlClicked(event:MouseEvent):void {
              navigateToURL(new URLRequest(url.text));
          }
  
      }
  
  }
  

  It is a known problem in 0.9.4 and the only thing you can do is to wait for 1.0 (scheduled daily now) or return to 0.9.3 to test.

  Note that you can use the 0.9.3 sim for many (most? all?) tests of the things built with 0.9.4 aside things that are ground in 0.9.3 (such as noise).

  NavigateToURL() is broken is mentioned, indirectly, on the WebWorks known issues page, although I don't remember see the equivalent of Tablet OS.

• DW doesn't render in the browser - "FTP Error Occurred"

  Hello

  Having a problem displaying my HTML file in my local browsers, Firefox and IE.  Am not a user of Chrome.

  I click the "Preview in browser" blue globe and get the following error message:

  An FTP error occurred - cannot open file server/servername /.

  Access denied.  The file exists may not, or there could be a permission problem.

  Then the two browsers show 404 errors.

  Recently, I tried to set up a new server in DW with info provided by my ISP and who doesn't, it gives the same error, but I'm surprised to see that I can not even made in my local browser.  DW seems to be looking on the remote server, not the local browser.

  
  Experts, Help!  I have a lot of work to do!

  Thank you!!

  Your Site definition is messed up. I'm guessing that you have defined a Local test server when you shouldn't have.

  Local test servers are for developers who work with PHP files locally.  In addition, you don't need for static HTML files.

  For stable local and preview, you do not need a test server.

  To test remotely, download files to a TEST folder on your remote server.

  Nancy O.